A new prediction method of industrial atmospheric pollutant emission intensity based on pollutant emission standard quantification

● Established a quantification method of pollutant emission standard. ● Predicted the SO₂ emission intensity of single coking enterprises in China. ● Evaluated the influence of pollutant discharge standard on prediction accuracy. ● Analyzed the SO₂ emissions of Chinese provincial and municipal coking enterprises. Industrial emissions are the main source of atmospheric pollutants in China. Accurate and reasonable prediction of the emission of atmospheric pollutants from single enterprise can determine the exact source of atmospheric pollutants and control atmospheric pollution precisely. Based on China’s coking enterprises in 2020, we proposed a quantitative method for pollutant emission standards and introduced the quantification results of pollutant emission standards (QRPES) into the construction of support vector regression (SVR) and random forest regression (RFR) prediction methods for SO₂ emission of coking enterprises in China. The results show that, affected by the types of coke ovens and regions, China’s current coking enterprises have implemented a total of 21 emission standards, with marked differences. After adding QRPES, it was found that the root mean squared error (RMSE) of SVR and RFR decreased from 0.055 kt/a and 0.059 kt/a to 0.045 kt/a and 0.039 kt/a, and theR² increased from 0.890 and 0.881 to 0.926 and 0.945, respectively. This shows that the QRPES can greatly improve the prediction accuracy, and the SO₂ emissions of each enterprise are highly correlated with the strictness of standards. The predicted result shows that 45% of SO₂ emissions from Chinese coking enterprises are concentrated in Shanxi, Shaanxi and Hebei provinces in central China. The method created in this paper fills in the blank of forecasting method of air pollutant emission intensity of single enterprise and is of great help to the accurate control of air pollutants.     

燃煤电厂大气污染物排放考核时间间隔的建议

新的《火电厂大气污染物排放标准》和新《环境保护法》实施后，燃煤火电企业的依法治企自觉性不断提高，但由于不同的环保管理文件对超标处罚依据和处罚手段不同，造成政府对企业处罚的自由裁量权加大，对企业造成一定的压力与困惑。结合企业实际运行情况对燃煤电厂大气污染物排放考核时间间隔提出建议。     

徐州大气颗粒物污染特征及传输途径分析

利用徐州2015年PM2.5和PM10逐小时质量浓度数据,分析了徐州颗粒物时空变化特征。同时基于HYSPLIT后向轨迹模式,结合GDAS气象数据和空气质量数据,利用轨迹聚类及潜在源分析法研究徐州不同季节气流轨迹对颗粒物浓度的影响及PM2.5和PM10的潜在来源。结果显示,2015年徐州环境空气中PM2.5和PM10的年均值为65和122μg/m3,分别超过国家《环境空气质量标准》(GB 3095—2012)二级标准限值86%和63%。各国控站点ρ(PM2.5)和ρ(PM10)月变化呈现一致的冬季高夏季低的"V"型变化特征,这与气象条件和气流轨迹特征季节性变化有关。秋冬季污染较高时期徐州主要受西北内陆性气团和较为稳定的气象条件影响,而春夏季来自较为干净的东部海洋性气团利于污染扩散。潜在源分析显示,山东、安徽、苏中南、浙西北等地区是影响徐州市PM2.5和PM10的主要潜在源区。各季节潜在源区分布范围有一定差异,冬季时潜在源区分布最广,并有明显向西北方向转移延伸的趋势。     

Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

油漆挥发分爆炸特性及浓度检测装置设计研究

为了实现对喷涂车间内挥发分浓度的检测，进行20 L球形爆炸特性测试实验，分析了油漆挥发分主成分及爆炸特性，根据油漆挥发分受热易挥发遇冷易凝结的物理特性、采样器采样原理、滤膜增重法测量原理以及基于单机片C++软件程序编写的电路智能控制技术，设计1种喷涂车间挥发分浓度检测装置。研究结果表明:油漆挥发分主成分具有爆炸性，且随着油漆颗粒物浓度增大，爆炸压力也增加。设计的装置对挥发分的采集率都在90%以上，总采集率为93.1%~98.9%，装置能够较为准确地检测挥发分浓度。     

新疆大气颗粒物的时空分布特征

基于2015年新疆12个城市的PM_(10)和PM_(2.5)地面监测数据,并结合同期气象观测数据,分析了新疆PM_(10)和PM_(2.5)质量浓度的时空分布特征及其与气象要素的关联性。结果表明:新疆大气颗粒物年均质量浓度呈现南高北低特征,南疆各城市的年均PM_(10)质量浓度为150～262μg/m~3,年均PM_(2.5)质量浓度为50～118μg/m~3。北疆各城市的质量浓度相对较低,年均PM_(10)质量浓度为28～139μg/m~3,年均PM_(2.5)质量浓度为13～74μg/m~3。从时间变化来看,在春季和夏季,新疆以粗颗粒物污染为主,冬季以细颗粒物污染为主。此外,在南疆各城市3月PM_(10)质量浓度突然大幅升高与相对湿度明显下降、风速增大直接相关,沙尘天气是导致该区域春季高PM_(10)质量浓度的重要原因。     

交通限行对大气颗粒物及PM2.5中二NFDA1英的影响

为了研究北京大气颗粒物和二NFDA1英(PCDD/Fs)的污染状况以及评估交通限行对大气颗粒物和PCDD/Fs的影响。利用同位素稀释高分辨率气相色谱/高分辨率质谱(HRGC/HRMS)联用法和USEPA 1613B 标准方法,以中国地质大学(北京)东门为采样点,采集大气PM_2.5、PM₁₀、TSP样品,对北京市交通限行期间以及交通限行前后等不同交通状况下颗粒物浓度及大气PM_2.5中17种2,3,7,8-PCDD/Fs污染特征进行了监测。结果表明,PM_2.5、PM₁₀、TSP的日均质量浓度在交通限行前分别为126、202、304 μg/m³,限行期间分别为39、78、93 μg/m³,限行结束后分别为79、126 μg/m³。PM_2.5中17种PCDD/Fs的质量浓度(毒性浓度)3个时段分别为1 804 fg/m³(70 fg I-TEQ/m³)、252 fg/m³ (9 fg I-TEQ/m³)和1 196 fg/m³ (48 fg I-TEQ/m³)。北京市交通限行期间颗粒物浓度和二 NFDA1 英浓度显著低于交通限行前后,交通源减排措施的实施是大气颗粒物和二 NFDA1英污染水平降低的主要原因,从减排效果看,交通源减排措施对大气细颗粒物(PM_2.5)的控制效果明显好于大气粗颗粒物。     

北京市PM5.0可吸入颗粒物反演及其时空分布分析

分析城市可吸入颗粒物的空间特征及影响因素对于制定更为有效的可吸入颗粒物污染控制政策具有重要的现实意义.本研究在实际采样和遥感数据处理基础上,构造差值植被指数(DVI),通过建立TM影像与对应PM5.0颗粒物实测值之间的相关关系模型,对北京市2008~2010年3 a的PM5.0的分布进行了反演计算和精度分析;研究了NDBI和NDMI对PM5.0浓度的影响,进一步揭示了北京五环区域范围内可吸入颗粒物的时空分布特征.结果表明,采用DVI反演PM5.0分布的方法可行,反演精度在可接受范围内;整体上研究区2008年PM5.0颗粒物污染最轻,西南三环和四环以及东南三四环之间为颗粒物污染的高值区,西北五环附近颗粒物污染较轻;NDBI(归一化建筑指数)、NDMI(归一化水汽指数)与PM5.0可吸入颗粒物的分布分别呈现显著的负相关和正相关关系,且二者对PM5.0的影响相近.     

柴油车尾气颗粒物排放现状评价

对2013年哈尔滨市不同供油方式的柴油车排气细颗粒物或黑碳测量参数—光吸收系数进行了统计分析,结果表明:涡轮增压和自然吸气供油方式光吸收系数均值分别为1.39 m-1和1.27 m-1,超标率分别为5.8%和2.4%,采用颗粒物控制措施及排气装置强制维护降低了颗粒物排放,符合排放标准。     

大气14CO2的时空分异特征及其在化石源CO2示踪中的应用

大气CO₂中放射性碳同位素(¹⁴C)的水平可以反映化石源CO₂的影响程度,这对于评估我国目前化石源CO₂的排放状况和制定节能减排政策具有重要的指导意义。本文在概述大气¹⁴CO₂采样和分析方法的基础上,简要介绍了大气¹⁴CO₂观测的起源和主要的源汇过程,重点论述了大气¹⁴CO₂的时空分异特征及其驱动因素;阐述了化石源CO₂浓度的估算方法及¹⁴CO₂在国内外化石源CO₂示踪中的应用现状,并对大气¹⁴CO₂观测在我国化石源CO₂示踪中的应用前景进行了展望;旨在为我国正确地开展大气¹⁴CO₂的观测研究,深刻地理解特定区域大气¹⁴CO₂的时空分异特征和化石源CO₂的分布状况提供参考。