对地级市空气自动监测多参数站建设的思考

阐述了地级市空气自动监测多参数站(超级站)建设的必要性,提出了统筹考虑、分期实施与突出重点、兼顾一般的建设思路,介绍了站房选址原则。指出超级站建设应以常规监测、霾监测、光化学烟雾监测、空间立体监测和源解析监测为目标,实施质量控制和质量保证手段,设置数据采集和显示平台,满足对大气复合污染的监测需求。     

油漆挥发分爆炸特性及浓度检测装置设计研究

为了实现对喷涂车间内挥发分浓度的检测，进行20 L球形爆炸特性测试实验，分析了油漆挥发分主成分及爆炸特性，根据油漆挥发分受热易挥发遇冷易凝结的物理特性、采样器采样原理、滤膜增重法测量原理以及基于单机片C++软件程序编写的电路智能控制技术，设计1种喷涂车间挥发分浓度检测装置。研究结果表明:油漆挥发分主成分具有爆炸性，且随着油漆颗粒物浓度增大，爆炸压力也增加。设计的装置对挥发分的采集率都在90%以上，总采集率为93.1%~98.9%，装置能够较为准确地检测挥发分浓度。     

河流水质自动监测站选址适宜性评价

为建立和量化适于河流水质自动监测站选址的评价方法体系,提出了河流水质自动监测站选址一致性、可行性和适宜性评价问题,并建立了选址可行性和适宜性评价2套指标体系。以自动站选址与手工断面位置不一致为前提,利用累乘指数判断选址可行性,在可行的基础上利用模糊综合评价进一步分析选址的适宜性。应用案例显示,罗汉大桥断面水质自动站选址于手工断面下游150 m处是可行的,并且此选址高度适宜,在具有水质代表性的同时兼顾成本和运维管理需求。     

苏州市环境空气质量自动监测信息化平台建设思路研究

随着不断增长的环境空气自动监测数据量与滞后的数据管理方式之间的矛盾日益凸显,现有的环境空气自动监测平台已出现了一定程度的滞后,逐渐不能满足基层监测部门、决策机构和社会各界的要求,亟待更新和完善。对现有环境空气自动监测业务平台建设思路加以更新和完善,有助于建设功能相对完善的新型平台,从而为环境管理和社会公众提供更为高效、便捷的数字化服务,并对政府决策和预报预警提供更为及时的技术支撑和保障。     

我国辐射环境自动监测系统建设的回顾与展望

辐射环境自动监测是我国辐射环境监测工作的重要内容,是核与辐射安全监管工作的重要手段.本文回顾了“十一五”以来,我国辐射环境自动监测系统建设的进展情况和在核与辐射监管工作中所发挥的作用,总结了辐射环境自动监测系统的建设和运行经验,并对今后的工作进行了展望,提出了完善系统建设和运行的合理化建议.研究指出,作为国家辐射环境监测网的重要组成部分,辐射环境自动监测系统初步具备了对我国省会城市和主要地级城市的辐射环境质量状况的实时监测能力.但由于我国辐射环境自动监测站于2008年底才开始在全国范围内建设,起步较晚、经验不足,依然存在点位数量和代表性不够、自动化程度不够高、软件系统功能不成熟、标准化和规范化问题比较突出,缺乏质量控制技术、运行维护难度大等问题.为此本文提出：第一,增加自动监测站数量,点位布设更有针对性;第二,增加自动监测站的类型;第三,加强软件系统的分析和控制能力;第四,完善相关标准、技术规范和质保体系;第五,完善运行维护体系;第六,增强国际学习和交流.     

总氮自动分析仪在地表水监测中的优势与局限研究

文章分析了总氮自动分析仪在地表水监测中的优势与局限。通过对检出限、精密度、准确度等一系列实验室质量要求进行测定发现,该法的空白较低,准确度和精密度均能达到国标要求,分析效率高,但检出限偏高,适合总氮含量较高的地表水监测,对于含量较低的地表水,还应使用传统的国标方法检测。     

Estimated Injury Risk for Specific Injuries and Body Regions in Frontal Motor Vehicle Crashes

Objective: Injury risk curves estimate motor vehicle crash (MVC) occupant injury risk from vehicle, crash, and/or occupant factors. Many vehicles are equipped with event data recorders (EDRs) that collect data including the crash speed and restraint status during a MVC. This study's goal was to use regulation-required data elements for EDRs to compute occupant injury risk for (1) specific injuries and (2) specific body regions in frontal MVCs from weighted NASS-CDS data.

Methods: Logistic regression analysis of NASS-CDS single-impact frontal MVCs involving front seat occupants with frontal airbag deployment was used to produce 23 risk curves for specific injuries and 17 risk curves for Abbreviated Injury Scale (AIS) 2+ to 5+ body region injuries. Risk curves were produced for the following body regions: head and thorax (AIS 2+, 3+, 4+, 5+), face (AIS 2+), abdomen, spine, upper extremity, and lower extremity (AIS 2+, 3+). Injury risk with 95% confidence intervals was estimated for 15–105 km/h longitudinal delta-Vs and belt status was adjusted for as a covariate.

Results: Overall, belted occupants had lower estimated risks compared to unbelted occupants and the risk of injury increased as longitudinal delta-V increased. Belt status was a significant predictor for 13 specific injuries and all body region injuries with the exception of AIS 2+ and 3+ spine injuries. Specific injuries and body region injuries that occurred more frequently in NASS-CDS also tended to carry higher risks when evaluated at a 56 km/h longitudinal delta-V. In the belted population, injury risks that ranked in the top 33% included 4 upper extremity fractures (ulna, radius, clavicle, carpus/metacarpus), 2 lower extremity fractures (fibula, metatarsal/tarsal), and a knee sprain (2.4–4.6% risk). Unbelted injury risks ranked in the top 33% included 4 lower extremity fractures (femur, fibula, metatarsal/tarsal, patella), 2 head injuries with less than one hour or unspecified prior unconsciousness, and a lung contusion (4.6–9.9% risk). The 6 body region curves with the highest risks were for AIS 2+ lower extremity, upper extremity, thorax, and head injury and AIS 3+ lower extremity and thorax injury (15.9–43.8% risk).

Conclusions: These injury risk curves can be implemented into advanced automatic crash notification (AACN) algorithms that utilize vehicle EDR measurements to predict occupant injury immediately following a MVC. Through integration with AACN, these injury risk curves can provide emergency medical services (EMS) and other patient care providers with information on suspected occupant injuries to improve injury detection and patient triage.     

Motorcycle crashes potentially preventable by three crash avoidance technologies on passenger vehicles

Objective: The objective of this study was to identify and quantify the motorcycle crash population that would be potential beneficiaries of 3 crash avoidance technologies recently available on passenger vehicles.

Methods: Two-vehicle crashes between a motorcycle and a passenger vehicle that occurred in the United States during 2011–2015 were classified by type, with consideration of the functionality of 3 classes of passenger vehicle crash avoidance technologies: frontal crash prevention, lane maintenance, and blind spot detection. Results were expressed as the percentage of crashes potentially preventable by each type of technology, based on all known types of 2-vehicle crashes and based on all crashes involving motorcycles.

Results: Frontal crash prevention had the largest potential to prevent 2-vehicle motorcycle crashes with passenger vehicles. The 3 technologies in sum had the potential to prevent 10% of fatal 2-vehicle crashes and 23% of police-reported crashes. However, because 2-vehicle crashes with a passenger vehicle represent fewer than half of all motorcycle crashes, these technologies represent a potential to avoid 4% of all fatal motorcycle crashes and 10% of all police-reported motorcycle crashes.

Discussion: Refining the ability of passenger vehicle crash avoidance systems to detect motorcycles represents an opportunity to improve motorcycle safety. Expanding the capabilities of these technologies represents an even greater opportunity. However, even fully realizing these opportunities can affect only a minority of motorcycle crashes and does not change the need for other motorcycle safety countermeasures such as helmets, universal helmet laws, and antilock braking systems.     

基于pH值和ORP的跳水池池水处理系统的自动控制

为改善跳水池水质的化学安全性和生物学稳定性,保障运动员、教练员以及工作人员身体健康,结合长春市泅渡馆跳水池,阐述了基于pH和ORP的池水处理自动控制系统,确定了自动控制系统的控制参数及其控制范围,为健康跳水池池水处理系统的自动控制系统的设计提供了参考。     

基于LabVIEW的自动配料控制系统设计

针对传统工业生产过程配料系统精度差、效率低、维修量大、人机界面不友好、成本高等问题,将总线控制技术、分时复用技术和精确称重技术相结合,设计了一套基于Labview的自动混配料控制系统。给出了系统的通讯设计,软件设计及硬件设计。现场应用结果证明,该系统能够自动、快捷、友好、精确可靠的完成配料生产。