Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.     

不同类型活性炭处理废水中重金属离子的研究进展

重金属对人体的显著毒性和难降解的特性,使重金属水体污染成为全球性关注的环境问题。本文综述了重金属废水的危害、来源及常用处理方法,比较了不同类型活性炭处理废水中重金属离子的差异,阐述了不同类型活性炭处理技术的优势和特点,并对今后的重金属废水处理技术研究方向进行了展望。     

过一硫酸盐的活化及其降解水中有机污染物机理的研究进展

基于活化过一硫酸盐（PMS）产生SO₄^-·的新型高级氧化技术,在芬顿和类芬顿催化降解水中有机污染物的研究中占有重要地位。本文从活化PMS方法的特点和用途出发,对目前活化PMS的主要方法进行了论述,并对活化PMS降解水中有机污染物的机理进行了探讨,最后对该领域研究中存在的问题进行了分析。指出,开发高效的协同活化PMS的方法将成为该领域研究的必然趋势。     

微波强化CWPO工艺CuO_x-CeO_2/GAC催化剂的制备及其对二甲亚砜的降解

以颗粒活性炭(GAC)为载体、铜为活性组分、铈为助剂组分、草酸钠为沉淀剂,采用浸渍焙烧法制得CuO_x-CeO_2/GAC催化剂。以H_2O_2为氧化剂,微波强化催化湿式过氧化氢氧化(CWPO)处理二甲亚砜(DMSO)初始质量浓度为1 000 mg/L的废水,处理3 min后DMSO去除率达93.8%。催化剂第7次使用时DMSO去除率仍保持在75%以上。初始废水pH在3~9范围内,DMSO去除率均在85%以上。助剂Ce的加入提高了催化剂表面活性组分的分散性和稳定性,使催化剂的活性稳定性和使用寿命显著提高。     

生理毒代动力学模型及其在有机污染物水生生态毒理研究中的应用

人类生产和生活使用各种人工合成的化学品,种类和数量急剧增长,对生态系统和人体健康造成了极大威胁。因此,亟需采用高效的方法对数量巨大的化合物进行毒性评价。对生理毒代动力学(PBTK)模型的建立过程及其在污染物生态毒理研究中的应用进行了综述。PBTK模型,又称生理药代动力学(PBPK)模型,是利用生理学和解剖学等原理,将生物体简化为用血流连接的肝、肾和脂肪等各组织器官房室,模拟化合物在生物体内的吸收、分布、代谢和排泄过程。模型参数包括生理参数和生化参数2个部分,可用MATLAB等软件进行模拟。模型已应用于数百余种有机污染物在鱼体等水生生物体的毒代动力学模拟。已有模拟结果能够预测化合物在生物体内的有效剂量,对化合物毒性进行评估,并可用于不同物种、不同剂量和不同暴露途径间的外推,有力推进了污染物生态毒理研究工作的开展。     

基于TLSER和QSPR关系预测PAHs和PCBs的LDPE膜-空气分配系数

有机污染物在被动采样材料与环境介质之间的平衡分配系数(K_P),是测定环境中有机污染物浓度的重要参数,但K_P值大部分都需要经过繁琐的实验测定获取,无法逐个测定数量繁多的污染物,因此需开发一种预测K_P值的方法。为此,搜集整理了一些多环芳香烃(PAHs)和多氯联苯(PCBs)的低密度聚乙烯(LDPE)-空气分配系数(K_PA)的实测值,基于理论线性溶解能(TLSER)和定量结构性质关系(QSPR),利用逐步多元线性回归(MLR)分别构建了预测K_PA值的模型。模型的决定系数R2adj分别为0.927和0.956,交叉验证系数Q2LOO分别为0.915和0.946,外部系数Q2ext分别为0.913和0.960。结果表明,2种模型具有良好的拟合优度、稳健性和预测能力,并解释了模型的机理。所构建的2种模型均可用来预测应用域内有机污染物的LDPE膜-空气分配系数。     

三维电极电Fenton氧化法处理染料废水

采用三维电极电Fenton氧化法处理实际染料废水,探究了染料废水处理效果的影响因素。实验结果表明：以钌铱镀层钛电极为阳极、不锈钢板为阴极、粉末活性炭为颗粒电极,在粉末活性炭投加量为2.0 g/L、电流密度为0.5 mA/mm²、极板间距为3 cm、pH为2.0、硫酸亚铁投加量为0.50 g/L的最优工艺条件下,反应2 h后COD、TOC、氨氮、色度的去除率达到最大,分别为62.80%、41.15%、42.48%和95.00%;粉末活性炭作为颗粒电极可使染料废水COD去除率提高18个百分点;重复使用10次的处理效果与第2次基本持平。     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

Cumulative carbon emissions and economic policy: In search of general principles

We exploit recent advances in climate science to develop a physically consistent, yet surprisingly simple, model of climate policy. It seems that key economic models have greatly overestimated the delay between carbon emissions and warming, and ignored the saturation of carbon sinks that takes place when the atmospheric concentration of carbon dioxide rises. This has important implications for climate policy. If carbon emissions are abated, damages are avoided almost immediately. Therefore it is optimal to reduce emissions significantly in the near term and bring about a slow transition to optimal peak warming, even if optimal steady-state/peak warming is high. The optimal carbon price should start relatively high and grow relatively fast.