Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

石煤渣生产工业窑炉保温材料的工艺研究

以石煤渣为主要原料研制的工业窑炉保温材料，具有较高的耐压强度和较低的导热率。分析研究了保温材料在烧成工艺过程中的物理化学变化，同时通过试验确定了干燥和烧成过程的工艺参数，为石煤渣治理和综合利用开辟了一种新的途径。     

Engineered nanomaterials in rivers--exposure scenarios for Switzerland at high spatial and temporal resolution

Probabilistic material flow analysis and graph theory were combined to calculate predicted environmental concentrations (PECs) of engineered nanomaterials (ENMs) in Swiss rivers: 543 river sections were used to assess the geographical variability of nano-TiO₂, nano-ZnO and nano-Ag, and flow measurements over a 20-year period at 21 locations served to evaluate temporal variation. A conservative scenario assuming no ENM removal and an optimistic scenario covering complete ENM transformation/deposition were considered. ENM concentrations varied by a factor 5 due to uncertain ENM emissions (15%-85% quantiles of ENM emissions) and up to a factor of 10 due to temporal river flow variations (15%-85% quantiles of flow). The results indicate highly variable local PECs and a location- and time-dependent risk evaluation. Nano-TiO₂ median PECs ranged from 11 to 1′623 ng L⁻¹ (conservative scenario) and from 2 to 1′618 ng L⁻¹ (optimistic scenario). The equivalent values for nano-ZnO and nano-Ag were by factors of 14 and 240 smaller.     

Remediation of copper-contaminated topsoils from a wood treatment facility using in situ stabilisation

Five organic matters, three phosphate compounds, zerovalent iron grit (ZVIG, 2% by soil weight), two alkaline compounds, and two commercial formulations were incorporated, singly and some combined with ZVIG, into a highly Cu-contaminated topsoil (Soil P7, 2600 mg Cu kg⁻¹) from a wood treatment facility. Formulations and two composts were also singly incorporated into a slightly Cu-contaminated topsoil (Soil P10, 118 mg Cu kg⁻¹) from the facility surrounding. This aimed to reduce the labile pool of Cu and its accumulation in beans cultivated on potted soils in a climatic chamber. Lowest Cu concentration in soil solution occurred in P7 soils amended with activated carbon (5%) and ZVIG, singly and combined. Basic slag (3.9%) and compost of sewage sludge (5%) combined with ZVIG promoted shoot production and limited foliar Cu accumulation. For amended P10 soils, no changes occurred in soil solution and foliar Cu concentrations, but one compost increased shoot production.     

Cancer and Non-Cancer Health Risk from Eating Cassava Grown in Some Mining Communities in Ghana

Food crops such as cassava, cocoyam and other tuber crops grown in mining communities uptake toxic or hazardous chemicals such as arsenic, and cadmium, from the soil. Cassava is a stable food for Ghanaians. This study evaluated human health risk from eating cassava grown in some mining communities in Ghana such as Bogoso, Prestea, Tarkwa and Tamso, which are important mining towns in the Western Region of Ghana. The study evaluated cancer and non-cancer health effects from eating cassava grown in the study areas in accordance with US Environmental Protection Agency’s Risk Assessment guidelines. The results of the study revealed the following: cancer health risk for Tamso, 0.098 (RME – Reasonable Maximum Exposure) and 0.082 (CTE – Central Tendency Exposure). This means that approximately 10 and 8 out of 100 resident adults are likely to suffer from cancer related cases by RME and CTE parameters respectively. For Prestea, we have 0.010 and 0.12, which also means that approximately 1 out of 100 and 10 resident adults out of 100 are also likely to suffer from cancer related diseases by RME and CTE parameters. The results of the study obtained were found to be above the acceptable cancer risk range of 1× 10⁻⁶ to 1× 10⁻⁴, i.e., 1 case of cancer out of 1 million or 100,000 people respectively.     

Diatom Thalassiosira weissflogii in oligotrophic versus eutrophic culture: models and ultrastructure

Populations of marine diatom Thalassiosira weissflogii were grown in continuous cultures enriched with f/2 medium. One of the two contrasting cultures (‘eutrophic’) received 5.6 times more nutrients than the other (‘oligotrophic’). Two mathematical models are analyzed to estimate eutrophication differences. The second model based on the Michaelis–Menten uptake and Droop growth shows that cells in the eutrophic culture should have about 56% higher content of silica which is the limiting nutrient. Diatom samples were prepared for the transmission electron microscopy after cells have been kept in chemostats for 37 days. The structure of diatom cells was investigated and a comparison is made between cells grown in oligotrophic and eutrophic conditions. In eutrophic culture, dividing cells were encountered more frequently while cell concentration was approximately equal in both chemostats. The central vacuole of cells in eutrophic culture accumulated dispersed and compact material from amorphous to spherical shape. In some cells the large central vacuole had fibrilar and peppered dense materials in addition to translucent granules, vesicules and multivesicular bodies. In the cytoplasm we found increased number of multivesicular bodies, dense and lucent granules some of which enclose membrane particles and lucent vesicules. Dense material depositions observed in the vacuole are also seen in the cytoplasm associated with organelles, mitochondria and plasmalemma. Cells have well-developed, active and slightly increased number of dictyosomes (5–6). Some dictyosomes with dense secretory material in the cistern are apparently engaged in a granule formation process. Functional significance of dense material in the central vacuole, which has not been observed in cells grown in oligotrophic condition, is discussed.     

包膜材料对土壤酶活性的影响

以自然资源＂水冬瓜果油＂为包膜材料,利用盆栽试验,共设5个处理,研究在有菊花吸收养分的情况下,水冬瓜（Idesia polycarpa maxim.var.vestita dies）油包膜材料在土壤中的降解性能及对土壤酶活性的影响。结果表明：水冬瓜油包膜材料随土壤含水量的增加,降解速率加快。种植菊花的土壤过氧化氢酶、蔗糖酶、脲酶活性也呈现先上升、后下降的趋势。在土壤含水量为30%时,包膜材料半衰期只有62 d;在处理3（果油85%＋调理剂15%）中,土壤过氧化氢酶、土壤蔗糖酶和脲酶数量增加最多。因此,水冬瓜果油85%＋调理剂15%和土壤含水量30%,有利于土壤酶活性的提高,从而加快包膜材料的降解速度。     

感应电动势与参照系的相对关系

本文从电磁场变换入手,举例说明感应电动势的大小及区分感生、动生电动势与参照系有关.     

河流营养物参照状态的建立方法研究进展

建立营养物参照状态是河流水污染控制的关键问题之一。系统论述了参照状态的各种内涵,重点分析了国外建立河流营养物参照状态的各种方法及优缺点,并分析了其在中国的适用性。最后,提出了河流营养物参照状态的进一步研究的重点。参照状态根据允许人类活动影响的程度可有多种含义:最小干扰状态、历史状态、最少干扰状态和最佳可达成状态。其中,最少干扰状态和最佳可达成状态在现实管理中具有一定程度的可操作性。参照河流百分比法是建立营养物参照状态的首选方法,但中国水环境污染形势严峻,参照点变得越来越少。当参照点不存在时,一般河流百分比法是参照河流百分比法的替代方法,然而一般河流百分比法和参照河流百分比法的匹配性关系并不完全保持一致。由于栖息地退化等因素对生物完整性的影响程度可能比营养物浓度更大,生物响应法在实际应用中是非常困难的。流域模型法虽然有众多优点,但是数据要求较高,并且常用流域模型的机理与中国有较大差距,在中国应用的结果具有较大的不确定性。综合考虑中国水环境污染现状和数据要求,以多元线性回归模型为代表的简易模型方法在中国应有最大的适用性。然而,环境因素与营养物质间的关系往往都是非线性的,今后应着重研究建立河流营养物参照状态的多元非线性回归模型方法。此外,还应加强季风河流营养物参照状态的季节性差异与年际差异研究,并在全国层面上根据自然因素划分适当规模的生态区,分区确定各生态区的河流营养物参照状态。