鞍钢钢绳厂生产污水处理的工艺设计及运行效果

本文介绍了鞍钢钢绳厂生产废水处理工艺,包括沉淀系统、气浮系统、砂滤罐过滤系统。通过试验确定p H为11时,沉淀系统对Zn2+的去除率达到98.4%。通过正交试验确定当PAC用量为20 mg/L、PAM用量为2 mg/L、p H 7.5、气浮压力为1.2 Mpa时气浮系统对钢绳厂废水中SS、石油类、COD的去除率分别达到90%、70%、70%。经过砂滤罐过滤系统后废水中的SS为20 mg/L、石油类为2 mg/L、COD为48 mg/L,其去除率分别达到94%、78%、80%。     

Comparison of quartz sand, anthracite, shale and biological ceramsite for adsorptive removal of phosphorus from aqueous solution

The choice of substrates with high phosphorus adsorption capacity is vital for sustainable phosphorus removal from waste water in constructed wetlands. In this study, four substrates were used： quartz sand, anthracite, shale and biological ceramsite. These substrate samples were characterized by X- ray diffractometry and scanning electron microscopy studies for their mineral components （chemical components） and surface characteristics. The dynamic experimental results revealed the following ranking order for total phosphorus （TP） removal efficiency： anthracite 〉 biological ceramsite 〉 shale 〉 quartz sand. The adsorptive removal capacities for TP using anthracite, biological ceramsite, shale and quartz sand were 85.87, 81.44, 59.65, and 55.98 mg/kg, respectively. Phosphorus desorption was also studied to analyze the substrates＇ adsorption efficiency in wastewater treatment as well as the substrates＇ ability to be reused for treatment. It was noted that the removal performance for the different forms of phosphorus was dependent on the nature of the substrate and the adsorption mechanism. A comparative analysis showed that the removal of particulate phosphorus was much easier using shale. Whereas anthracite had the highest soluble reactive phosphorus （SRP） adsorptive capacity, biological ceramsite had the highest dissolved organic phosphorus （DOP） removal capacity. Phosphorus removal by shale and biological ceramsite was mainly through chemical adsorption, precipitation or biological adsorption. On the other hand, phosphorus removal through physical adsorption （electrostatic attraction or ion exchange） was dominant in anthracite and quartz sand.     

两种新型涂铁改性砂的过滤性能及反冲洗条件研究

以两种新型涂铁改性石英砂(纳米氧化铁改性砂,Nano-OCS;氧化铁改性砂,IOCS)及普通石英砂(RQS)为研究对象,考察了两种新型改性砂对沉后水腐殖酸及浊度的直接过滤效果,对其反冲洗条件进行优化研究,并对3种滤料的过滤效果进行了比较.结果表明,1滤层厚度为45 cm时,最佳滤速为6 m·h-1;3种滤料对腐殖酸和浊度的直接过滤效果依次为:Nano-OCSIOCSRQS,其中两种涂铁砂对腐殖酸的去除率分别为71.70%和61.61%;2Nano-OCS和IOCS滤柱的反冲洗流程分4步,对应的流程及最佳操作条件为:首先,用0.5 mol·L-1NaOH的溶液浸泡,气冲强度13 L·s-1·m-2,气冲时间6 min;然后,用0.075 mol·L-1的NaOH溶液与空气同时反冲洗,NaOH溶液冲洗强度为8 L·s-1·m-2,气冲强度13 L·s-1·m-2,冲洗时间3 min;接着用0.015 mol·L-1的FeCl3溶液与空气同时反冲洗,FeCl3溶液冲洗强度为8 L·s-1·m-2,气冲强度13L·s-1·m-2,冲洗时间2 min;最后,用清水冲洗,冲洗强度8 L·s-1·m-2,冲洗时间4 min.两种涂铁砂反冲洗前后表面形态结构更加复杂、粗糙度增加,对腐殖酸去除率进一步提高.3当滤层厚度由45 cm增加到80 cm时,Nano-OCS对腐殖酸直接过滤的最高去除率由74.6%提高至80.3%,平均去除率由57.9%提高至68.5%.     

石英砂加工企业职业病危害防护措施与管理对策研究

通过对安徽省石英砂加工企业生产工艺流程和现场进行调查分析,得出矽尘和噪声是两种最主要的职业病危害因素,发现石英砂生产企业矽尘和噪声危害十分严重,生产作业现场未配备任何防护装备和个人防护用品,作业人员接触职业病危害的比率非常高。分析了石英砂加工企业在职业病危害防护与管理方面的欠缺与不足,提出了针对矽尘和噪声危害因素的具体工程防护措施与管理对策,从源头控制和消除职业病危害,保护劳动者的生命安全与健康。     

石英砂滤料表面润湿改性

采用硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂对石英砂进行表面改性,以制备亲油疏水性滤料。研究得出,钛酸酯偶联剂改性石英砂的最佳工艺条件为:偶联剂用量15%,反应温度90℃,搅拌时间15 min;硅烷偶联剂和铝酸酯偶联剂改性石英砂的最佳工艺条件均为:偶联剂用量15%,反应温度110℃,搅拌时间15 min。水对钛酸酯偶联剂改性石英砂滤料的润湿重量由改性前的1.5589 g降低到0.0282 g,水对硅烷偶联剂改性石英砂滤料的润湿重量降低到0.0607 g,水对铝酸酯改性石英砂滤料的润湿重量降低到0.2664 g。静态吸附实验表明,硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂改性石英砂滤料对油的吸附容量分别增加了33.67%、42.87%和22.30%。XPS和FT-IR分析表明,偶联剂均以化学键的方式包覆在石英砂滤料表面,结合稳定。     

游泳池中隐孢子虫卵囊替代物的去除

隐孢子虫是常见的球状寄生虫。接触含有隐孢子虫卵囊的水体可致隐孢子虫病,主要的临床表现为腹泻,严重者可致死。游泳池是主要的传播场所。采用容积为5 500 L的游泳池,进行隐孢子虫卵囊替代物的修复模拟实验,研究在游泳池条件下絮凝沙滤技术对直径为4.5μm隐孢子虫卵囊替代物的去除效果。实验结果表明,氯化铝剂量为0.1 mg/L,沙滤料高度为30 cm,内循环流速为11.5 L/min,对隐孢子虫卵囊替代物去除率在90%以上。该技术对浊度具有较好的处理效果,当进水浊度降低且接近于出水浊度时,系统进入稳定运行阶段,对虫卵囊替代物去除率可以达到96%。     

Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sand

The creation of metal parts via casting uses molds that are generally made from sand and phenolic resin. The waste generated after the casting process is called waste foundry sand (WFS). Depending on the mold composition and the casting process, WFS can contain substances that prevent its direct emission to the environment. In Brazil, this waste is classified according to the Standard ABNT NBR 10004:2004 as a waste Class II (Non-Inert). The recycling of this waste is limited because its characteristics change significantly after use. Although the use (or reuse) of this byproduct in civil construction is a technically feasible alternative, its effects must be evaluated, especially from mechanical and environmental points of view. Thus, the objective of this study is to investigate the effect of the use of WFS in the manufacture of cement artifacts, such as masonry blocks for walls, structural masonry blocks, and paving blocks. Blocks containing different concentrations of WFS (up to 75% by weight) were produced and evaluated using compressive strength tests (35 MPa at 28 days) and toxicity tests on Daphnia magna, Allium cepa (onion root), and Eisenia foetida (earthworm). The results showed that there was not a considerable reduction in the compressive strength, with values of 35 ± 2 MPa at 28 days. The toxicity study with the material obtained from leaching did not significantly interfere with the development of D. magna and E. foetida, but the growth of the A. cepa species was reduced. The study showed that the use of this waste in the production of concrete blocks is feasible from both mechanical and environmental points of view.     

黑水河下游鱼类资源现状及其保护措施

为了解白鹤滩蓄水运行前黑水河下游鱼类资源的现状、受到的主要威胁及其保护措施,于2014年1~12月在黑水河下游干支流江段采用电捕法进行了渔获物调查。结果显示:12个月共调查发现鱼类28种,隶属于3目8科23属,其中喜流水生境、产粘沉性卵、以着生藻类或/和底栖动物为食物的鱼类种类较多;调查区域鱼类个体规格普遍较小,其中齐口裂腹鱼Schizothorax prenanti、短体副鳅Paracobitis potanini、红尾副鳅Paracobitis varigatus、短须裂腹鱼Schizothorax wangchiachii、前鳍高原鳅Triplophysa anterodorsalis、中华纹胸鮡Glyptothorax sinense和凹尾拟鲿Pseudobagrus emarginatus为调查区域的主要经济鱼类;上半年和下半年的渔获物结构在统计学上差异显著(R=0.81,p=0.1%0.05),鱼类在金沙江干流和黑水河下游之间的相互迁徙比较明显;CPUE呈现先波动下降然后逐月上升的趋势,其中10月份的CPUE最低;丰度生物量比较曲线显示2014年各月的渔获物结构均处于严重干扰状态。黑水河下游河道采砂以及过度捕捞是白鹤滩蓄水前影响黑水河下游鱼类资源的主要因素,建议通过控制采砂的江段、采砂的时间以及全面禁捕保护该区域的鱼类资源。     

A conceptual approach to model sand–gravel extraction from rivers based on a game theory perspective

Sand–gravel mining is a significant parameter of economic development and social welfare function in modern societies. As demand for aggregate increases in construction industry, conflicts for the availability of the resource and environmental impacts become more intense. The present paper describes the contested status quo in riverbed sand–gravel mining activities with an example from Greece, as a case study. The scope is to propose a methodology about good governance of the mining sector that promotes a sustainable sharing of aggregate resource by securing environment and safekeeping revenues in the mining trade market.     

不同强度岩石中开挖圆形巷道的局部化过程模拟

利用FLAC模拟了不同粘聚力条件下圆形巷道的局部化过程。为了模拟巷道开挖,利用编写的F ISH函数删除巷道内部的单元。岩石服从莫尔库仑剪破坏与拉破坏复合的破坏准则,破坏之后呈现应变软化-理想塑性行为。文中模拟分为3步:首先,将静水压力施加在模型上,直到达到静力平衡状态;然后,利用编写的F ISH函数开挖巷道;最后,计算重新开始,直到达到静力平衡状态或者塑性流动状态。模拟结果表明,随着粘聚力的降低,巷道围岩的破坏模式首先由孔壁附近零星单元的破坏向4个对称的小V形坑式剪切破坏转变,然后由包含若干小V形坑的大V形坑式剪切破坏向巷道全断面的破坏转变。前三者破坏发生后,巷道围岩仍然能保持稳定。与最大塑性拉伸应变相比,最大剪切应变增量、最大塑性剪切应变要高得多;最大剪切应变增量、最大塑性剪切应变相差不大;随着粘聚力的增加,三者均越来越小。