模糊综合评价法在钢铁企业安全投资合理性评价中的应用

为了对钢铁企业安全投资进行模糊综合评价,建立了钢铁企业安全投资的评价体系,确定各因素的权重。得出模糊综合评价矩阵,可对各因素进行评价分析;得出某钢铁企业安全投资现状分数为83.9分,等级为较好,需着重加强安全培训、劳保品、工业卫生等人因素方面的投资;在环境方面的投资较合理。     

BIM技术在钢结构建筑抗震减灾管理中的应用

为提高钢结构建筑抗震减灾性能,降低建筑坍塌风险,研究BIM技术在钢结构建筑抗震减灾管理中的应用方法是非常必要的。利用BIM技术在钢结构建筑整体建造中的动态建模、可视化、信息共享管理以及抗震减灾性能检测等优势,在建筑抗震减灾管理决策阶段,选出最优方案,针对方案中影响建筑抗震减灾性能风险制定管理策略;在设计阶段,创建三维建筑模型,调整存在风险建筑模型数据信息,并通过振荡模拟分析降低风险;在施工阶段,管理钢结构建筑材料,提升建筑构件的刚度,并依据建筑施工阶段的抗震减灾管理原则制定相应的管理方法,实现对钢结构建筑的抗震减灾管理。结果表明,BIM技术可实现抗震减灾管理中的地震波检测,检测结果精准可靠;可提升建筑构件的刚度与承载力及建筑的抗震减灾性能,降低建筑坍塌等风险,实现钢结构建筑抗震减灾管理。     

Effect of oxide-based fluxes on mechanical and metallurgical properties of Dissimilar Activating Flux Assisted-Tungsten Inert Gas Welds

Present investigation is to study the “Effect of Activating Fluxes on Mechanical and Metallurgical Properties of Dissimilar Activated Flux-Tungsten Inert Gas Welds”. Effect of current, welding speed, joint gap and electrode diameter on weld bead dimensions on 6 mm thick dissimilar weld between carbon steel to stainless steel, was studied under Activated Flux-Tungsten Inert Gas Welding process. During this investigation three different types of oxide powders were used-TiO₂, ZnO and MnO₂. After welding samples were subject to mechanical testing, in addition to characterization via micro hardness and microstructures of Normal Tungsten Inert Gas Welds and Activated Flux-Tungsten Inert Gas Welds. Activating fluxes TiO₂ and ZnO are effective fluxes for Activated Flux-Tungsten Inert Gas Welding of dissimilar weld between CS to SS. Highest depth/width (D/W) ratio reported under TiO₂ and ZnO fluxes compare to Normal-Tungsten Inert Gas Welds. Lowest angular distortion was observed under TiO₂ flux compare to Normal-Tungsten Inert Gas Welds. Mechanical properties, Joint Efficiency of Activated Flux-Tungsten Inert Gas Welds are higher than normal-Normal Tungsten Inert Gas Welds. Tensile Test specimens of both the processes failed from the parent metal (carbon steel side). Carbon migration from CS to SS, had occurred which led to failure of weld joints from CS side.     

Microstructure of 2205 duplex stainless steel joint in submerged arc welding by post weld heat treatment

The 2205 duplex stainless steel (DSS) is of both good properties austenitic steel and ferritic steel, which applies to the shipbuilding industry usually. In this paper, the OM, XRD and microhardness test methods are used to analyze the variation of submerged arc welded (SAW) joints with and without post weld heat treatment (PWHT). The research results show that the σ phase disappear in the fusion edge zone near heat affect zone (HAZ) and an increase in the welded center zone during the follow-up PWHT, while the amount of γ phase is decreased in the welded center zone with PWHT. A segregation distribution of some second phases is also found in the welded center zone after PWHT. There have two pick values of microhardness arise in the fusion edge zone and the welded center zone separately without PWHT. However, a maximum value of microhardness at the fusion edge zone near HAZ is disappeared and the other is still held at the welded center zone during PWHT. It can be attributed to the changes of second phases, element diffusions and particle segregation during PWHT. A developing mechanism is issued to demonstrate the second phases transferring of the 2205 DSS SAW joints by PWHT.     

45~#钢在西双版纳大气环境下的腐蚀研究

目的研究西双版纳热带雨林地区大气环境下材料的初期腐蚀行为。方法使用45#碳钢在西双版纳大气环境下进行1年的大气暴露腐蚀试验,并利用质量损失分析、SEM、XRD和FTIR等技术,分析45#碳钢在西双版纳大气环境下暴露1年的腐蚀行为。结果 45#碳钢的腐蚀产物以γ-FeOOH,Fe(OH)3和Fe3O4为主,并有少量的α-FeOOH。结论西双版纳大气环境腐蚀性为C2级。在暴露1年的时间内,锈层化学稳定性随试验时间的延长逐渐增强,对基体的保护性逐渐加大。     

某大型钢结构项目喷涂废气污染防治措施可行性分析研究

钢结构建筑是一种新型的节能环保的建筑体系,大多数大型钢结构产品在生产过程中均需要进行抛丸除锈、喷涂处理,使用油漆进行喷涂过程中将不可避免地产生含TVOC(主要为甲苯、二甲苯和非甲烷总烃)的有机废气。大型钢构类生产项目喷涂废气的收集和处理尤为困难。文章结合某大型钢结构生产企业实际采取的喷涂废气治理方法进行喷涂废气污染防治可行性分析,旨在为同类项目喷涂废气污染治理及进一步改良涂装废气治理工艺和技术提供参考依据。     

基于总物流分析的我国钢铁工业生态效率分析

近年来我国钢铁产量快速增长且钢铁工业规模庞大,因此有必要对我国钢铁工业的生态效率进行研究. 采用总物流分析方法对我国钢铁系统的总物流进行分析,得到了钢铁系统的总物流分析指标;对1995—2011年我国钢铁工业的生态效率(包括资源效率、能源效率、脱钩指数等)进行了分析. 结果表明:2004年资源效率(粗钢产量与铁矿原矿消耗的比值)和资源经济效率(钢铁工业增加值与铁矿原矿消耗的比值)均达到最大值,二者分别为0.54 t/t和827.66元/t;2011年能源效率(粗钢产量与钢铁工业能耗的比值)和能源经济效率(钢铁工业增加值与钢铁工业能耗的比值)均达到最大值,分别为1.53 t/t和2 976.65元/t. 基于我国钢铁系统的总物流分析结果进行了脱钩指标分析,结果显示,DDEU(国内开采量的脱钩指数)为0.189,大于DMI(直接物质投入量)、TMR(总物质需求)及DPO(国内排放量)的脱钩指数(分别为0.115、0.084和0.061),即国内开采量的脱钩情况在该阶段达到最佳,这与我国铁矿石产量不足、钢铁生产更多依赖于进口资源密切相关. 最后提出了提高矿产资源综合利用率和重视废钢资源回收利用等相应的对策建议.     

钢铁工业氮氧化物污染防治途径研究

针对钢铁工业氮氧化物减排的紧迫形势,首先介绍了钢铁工业氮氧化物主要排放源,提出了烧结工序和自备电厂是氮氧化物排放的主要污染源,其烟气中氮氧化物控制是钢铁企业氮氧化物减排的重点;其次对钢铁工业氮氧化物生成机理,热力型、燃料型、快速型进行了分析;在此基础上,总结了钢铁工业烧结、自备电厂、焦化、炼铁、轧钢工序氮氧化物污染防治技术途径,为钢铁工业进一步开展氮氧化物减排工作提供了技术支撑.     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

京津冀地区钢铁行业高时空分辨率排放清单方法研究

针对目前京津冀地区钢铁行业大气污染物排放量基数不清,排放清单缺失的现状,以钢铁行业调研、企业在线监测、污染源调查等数据为基础,综合考虑钢铁行业具体工艺设备、环保措施、产能等信息,按照自下而上的方法建立了一套高时空分辨率排放清单.经计算,2012年京津冀地区钢铁企业排放SO2为47.16万t,NOx为37.22万t,烟粉尘为34.15万t,其中烧结和高炉工艺为京津冀钢铁行业污染物的主要来源;从空间分布来看,唐山、邯郸两地区集中了整个京津冀地区一半以上的钢铁企业,其污染物排放量占到了整个区域钢铁企业排放总量的一半以上.