Potential energy production from organic waste and its environmental and economic impacts at a tertiary institution in Palestine

Municipal solid waste (MSW) is one of the most well-known biomass resources that can be utilized to produce renewable energy. Numerous countries are plagued by the proliferation of waste, particularly organic waste that can be utilized for energy recovery. Palestine suffers from inefficient solid waste management, and only recently have a few projects focused on bioenergy production been implemented. Throughout the years, the city of Tulkarm experiences power outages which cause a challenge to the Palestine Technical University-Kadoorie campus in Tulkarm. Thus, the possibility of energy recovery from the organic portion in Palestine Technical University-Kadoorie was evaluated. The analysis of an economic impact included discussions of a number of economic aspects, including Levelized cost of energy, internal rate of return, present worth, annual worth, and payback period. On the other hand, a carbon dioxide savings analysis and gas emission were evaluated. The outcomes of the energy optimization demonstrated that the suggested system could supply the institution with an average of roughly 7 MWh of electrical energy. According to the economic study, this project offers 0.25 million dollars in present value, 0.144 million dollars in annual value, a 13 percent internal rate of return, a payback period of 6 years, and a levelized cost of energy of 0.11 dollars for each kWh generated. Additionally, the environmental assessment revealed that this system might reduce CO₂ emissions by around 8,343,778 tons. For effective waste management, energy recovery, and emission reduction, it is advised to implement anaerobic digestion technology.     

System dynamics research of non-adaptive evacuation psychology in toxic gas leakage emergencies of chemical park

Chemical industry park plays an important role in optimizing the allocation of resources, but an emergency may make a great deal of personnel casualty and property loss. Many casualties are not the result of accidents but are caused by extreme behavior because of the non-adaptive psychology of the evacuees. Panic is one of the non-adaptive psychological behaviors during an evacuation, which is influenced by a variety of factors. Based on the consideration of the disaster environment and the evolution of crowd emotion, a system dynamics model of panic spread is established by using Anylogic software, and simulation experiments are carried out for different disaster severity, visibility, and groups. The results show that the number of people with severe panic increase when visibility decreases or disaster diffuses. Besides, the appropriate proportion of groups can effectively reduce the cooling time of crowd and ease the fears. However, continue to increase the number of groups has no significant effect on the panic control. This work can provide some reasonable guidance for regional emergency evacuation in chemical park.     

Analysis of crater formation in buried NG pipelines: A survey based on past accidents and evaluation of domino effect

The formation of a crater by the abrupt and catastrophic rupture of a high-pressure pipeline can be highly relevant, especially when the crater uncovers other pipelines, which could undergo a domino effect with a significant increase of the consequences on people or on the environment. However, this scenario has been only partially studied in the literature. To assess the influence of the pipeline parameters on the dimensions of the resulting crater, a statistical analysis of accidental ruptures of buried natural gas pipelines that have involved the formation of a crater was carried out. Mathematical expressions are proposed to describe the proportionality relationships found, which can be very useful to support adequate separation distances in the design and construction of parallel corridors of pipelines after appropriate escalating effects are considered. Finally, detailed event trees were developed to calculate the probability of occurrence of the final outcomes, as well as the identified domino sequences, based on a qualitative and quantitative analysis of the data. The study of these accident scenarios, based on actual cases, represents a useful and needed advance in risk analysis of natural gas transportation through pipelines.     

废旧硬质聚氨酯泡沫塑料的木质素改性及再生

采用含有二乙二醇(DEG)和乙醇胺(ETA)的双组分解交联剂降解废旧硬质聚氨酯泡沫塑料(PU硬泡),并利用降解得到的低聚物多元醇与木质素复合制备出性能增强的再生PU硬泡。通过对制备的再生PU硬泡的红外光谱、密度、吸水率、抗压强度、热稳定性、导热系数、热重曲线等进行分析测试,考察m(DEG)∶m(ETA)对再生PU硬泡性能的影响。实验结果表明:m(DEG)∶m(ETA)=1∶3时废旧PU硬泡的降解效果最好;木质素加入量为2.0%(w)时再生PU硬泡的密度低、抗压强度高、保温性能良好,达到国家标准《建筑绝热用硬质聚氨酯泡沫塑料》(GB/T 21558—2008)的品质要求。     

北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g；生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2； 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率； I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一；危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

Critical review for the quantification of leachate production: Evaluation example for the “Oum Azza” public landfill in Rabat city,Morocco

The estimation of leachate quantities produced in landfills is necessary to dimension the treatment plants allowing to reduce the polluting load of these effluents and consequently avoid their negative impacts on the environment. Different leachate quantification methods were used in this study to assess the leachate volume produced at the Oum Azza landfill. The water balance method give comparable estimations of leachate production to the Ouled Berjal landfill ratio. The first method showed average values between 487 and 495 m³/day for 2015, 2018, and 2019, and at the same time, the second method gave values between 470 and 477 m³/day for the same years. In contrast, the World Bank ratio showed high values that vary between 2260 and 2295 m³/day for 2015, 2018, and 2019. The on-site data and the statistical analysis showed us that the World Bank ratio is not adapted for the estimation of the leachates produced in Oum Azza landfill, while the water balance and the ratio of Ouled Berjal landfill allowed to give comparable results to reality.     

Physico-chemical characterization of Residual Household Waste for energy recovery in insular territories: Case study of Reunion Island

Waste-to-energy is a promising approach to face the current challenge of waste overproduction in Reunion Island, a French territory. In this particular context of an isolated and tropical territory, it is essential to study the properties of potential feedstocks to choose the most appropriate conversion process. This article reports on the composition of Residual Household Waste from Reunion Island and its physico-chemical parameters. Twelve representative samples of Residual Household Waste were subjected to thermal and elemental analysis. The results showed that their composition had a significant influence on the physico-chemical properties, including calorific value. Residual Household Waste from the selective sorting (rich in wood, plastic, and sanitary textiles) as well as dry mixed RHW are the most interesting for energy recovery. Due to their high volatile matter and high carbon content, and their low moisture content, these types of waste have a high calorific value exceeding 18 MJ/kg. Furthermore, the RHW sample comply with the environmental and health criteria applied by French regulations concerning halogen and heavy metal. Thus, it seems that Residual Household Waste can be an alternative to conventional fuels used in incineration or pyro-gasification processes. However, the study also points the need for a pre-treatment process for these wastes. Indeed, it is necessary to sort them correctly in order to avoid the risks of pollution and important maintenance. And more importantly, drying beforehand is unavoidable to improve combustibility and obtain optimal energy conversion.     

Biohythane production from pineapple peel using Methanosarcina mazei enhanced with palm oil mill effluent (POME) sludge in single-stage anaerobic digestion

Biohythane production via single-stage anaerobic digestion (AD) is an effective way for sustainable energy recovery from lignocellulosic biomass. In this paper, biohythane was produced through the AD process from pineapple peel waste substrate using purely cultured Methanosarcina mazei with the enhancement of palm oil mill effluent (POME) sludge as the inoculum. This study focuses on the effects of the lignocellulosic pre-treatment method, the addition of POME sludge into M. mazei culture medium as inoculum, and various operational conditions (food to microorganisms (F/M) ratios, temperature, pH) on gas production performances. The experimental results indicate that these parameters influenced the efficiency of biohythane production by producing the peak maximum biohythane production rate values (HPR_max) and (MPR_max), H₂:CH₄ = 1.93:0.67 L/L-d, and biohythane yield (HY) and (MY), H₂:CH₄ = 1.18:0.55 mL/L-substrate. This study demonstrates that biohythane gas (H₂ + CH₄ + CO₂) production from pineapple waste can be accelerated by M. mazei only with the enhancement of POME sludge through single-stage AD system under mesophilic batch process conditions.     

基于TVR的腐蚀油气管道失效概率及安全寿命研究

为避免因腐蚀导致油气管道失效，针对因管道特性和腐蚀尺寸的不确定性使得管道剩余强度成为概率模型的特点，建立了腐蚀管道强度损失随机模型；借助可靠性理论，通过分析管道腐蚀进程的时变性特点，将管道系统由损伤积累和抗力衰减导致的剩余强度随机化；提出基于穿越率的腐蚀油气管道失效评定及安全寿命预测方法。研究结果表明:腐蚀速率和运行压力对管道失效概率及安全寿命影响显著,管道尺寸影响适中，而相关系数和拉伸强度影响较小；若腐蚀速率Va=0.2 mm/a，VL=10 mm/a或局部腐蚀缺陷半径达到管道壁厚的0.5倍时，建议作为重点风险段监测并检修。所建方法是对腐蚀油气管道运营监控和风险评估的有益补充。     

钻孔间距对水力压裂促抽煤层瓦斯的影响

针对定量确定合理钻孔间距困难问题，基于损伤力学和多场耦合理论，建立了水力压裂和瓦斯抽采的煤层流固耦合模型，包括和水运移场、应力场以及孔隙度、渗透率演化方程，并采用Comsol联合Matlab求解，研究了不同钻孔间距时压裂和抽采过程中煤层弹模、损伤值、渗透率、瓦斯压力、抽采量和压裂贯通时间的变化规律。结果表明:耦合模型可较准确地模拟煤层水力压裂和瓦斯抽采过程；压裂贯通时间与钻孔间距呈指数增长关系；在马堡煤矿，当钻孔间距为4~8 m时，压裂损伤区在抽采孔贯通，渗透率呈“n”型曲线，瓦斯抽采后，瓦斯压力迅速下降，抽采有效区随间距的增加而增大；当钻孔间距为9~12 m时，压裂损伤区未贯通，煤层渗透率呈“m”型曲线，抽采有效区随间距的增加而减小，与间距4~8 m相比，瓦斯抽采量较小。