Microbial succession associated with organic matter decomposition during thermophilic composting of organic waste.

Using dog food as a model of the organic waste, thermophilic composting was carried out for 14 days at a fixed temperature of 60 degrees C. The relationship between organic matter decomposition measured by CO2 evolution during the bio-stabilization process and microbial succession expressed as the changes over time in the restriction fragment length polymorphism (RFLP) patterns of 16S rDNA sequences, of micro-organisms associated with the composting material was also examined. The CO2 evolution rate peaked on day 3 and gradually decreased until it became extremely small after day 9 of composting, indicating that vigorous organic matter decomposition ceased around this time. On the other hand, the RFLP pattern changed drastically from day 0 to day 4 or 5, then remained stable until day 7 or 8, reaching its final configuration, with little variations, after day 9 of composting. RFLP analysis therefore indicates that microbial succession continued into the later stage of composting. Nevertheless, by day 9, the rate of organic matter decomposition was so low that its influence on microbial populations could be hardly recognized by conventional methods of dilution plating. Moreover, the compost produced by day 9 showed no inhibitory effect on the growth of Komatsuna (Brassica campestris L. var. rapiferafroug), indicating that the maturity of compost is sufficient for plant growth when the rate of organic matter decomposition has become extremely low and the RFLP patterns become stable.     

Indoor Air Quality of Public Places in Mumbai, India in Terms of Volatile Organic Compounds

Indoor air quality at nine locations viz. food courts, restaurant, bar, conference room, office and theater, which can be classified as public places have been monitored for Volatile Organic Compounds (VOCs) content. Forty VOCs have been identified and one fourth of these are classified as Hazardous Air Pollutants. Levels of most VOCs are observed to be below the guideline values for public places and offices, as adopted by Hong Kong. Consumer goods are found to be predominant source of chlorinated VOCs in indoor air. Levels of benzene and carbon tetrachlorides were observed to be above the guideline values at all the locations. Effect of ozonisation on Total VOC concentrations have also been studied.     

Emissions of VOCs at Urban Petrol Retail Distribution Centres in India (Delhi and Mumbai)

Air pollution has assumed gigantic proportion killing almost half a million Asians every year. Urban pollution mainly comprises of emissions from buses, trucks, motorcycle other forms of motorized transport and its supporting activities. As Asia's cities continue to expand the number of vehicles have risen resulting in greater pollution. Fugitive emissions from retail distribution center in urban area constitute a major source. Petrol vapours escape during refueling adding pollutants like benzene, toluene, ethylbenzene and xylene to ambient air. This paper discusses a study on fugitive emissions of Volatile Organic Compounds (VOC) at some refueling station in two metropolitan cities of India, i.e., Mumbai and Delhi. Concentration of VOCs in ambient air at petrol retail distribution center is estimated by using TO-17 method. Concentration of benzene in ambient air in Delhi clearly shows the effect of intervention in use of petroleum and diesel fuel and shift to CNG. Chemical Mass Balance (CMB) model is used to estimate source contributions. At Delhi besides diesel combustion engines, refueling emissions are also major sources. At Mumbai evaporative emissions are found to contribute maximum to Total VOC (TVOC) concentration in ambient air.     

Developmental Processes, Changing Lifestyle and Traditional Wisdom: Analyses from Western Himalaya

Traditional knowledge and practices are important in prudent resource use and biodiversity conservation. The implications of modernization and changing lifestyle are discussed in the context of agriculture and resource use, the two sectors in which maximum modernization has occurred. The information was gathered through observations and structured interviews over three years (July 1996 to July 1999) of field work in the western Himalaya. It was observed that forest based subsistence agriculture has given way to the market dependant cash crop cultivation. That apart from loss of genetic diversity, has also resulted in the degradation of forests. The use of wild plants in the day-to-day activities has also declined and dependence on high value market products has increased. Currently, wild plants are used only if no other cheap substitute is available in the market or if the use is economically beneficial to the people. Thus, the knowledge gathered through ages of experience is eroding because of the activities geared for short-term economic benefits which, in long run, may not be sustainable.     

Biosorption of chromium (VI) from aqueous solutions and ANN modelling

The use of sustainable, green and biodegradable natural wastes for Cr(VI) detoxification from the contaminated wastewater is considered as a challenging issue. The present research is aimed to assess the effectiveness of seven different natural biomaterials, such as jackfruit leaf, mango leaf, onion peel, garlic peel, bamboo leaf, acid treated rubber leaf and coconut shell powder, for Cr(VI) eradication from aqueous solution by biosorption process. Characterizations were conducted using SEM, BET and FTIR spectroscopy. The effects of operating parameters, viz., pH, initial Cr(VI) ion concentration, adsorbent dosages, contact time and temperature on metal removal efficiency, were studied. The biosorption mechanism was described by the pseudo-second-order model and Langmuir isotherm model. The biosorption process was exothermic, spontaneous and chemical (except garlic peel) in nature. The sequence of adsorption capacity was mango leaf > jackfruit leaf > acid treated rubber leaf > onion peel > bamboo leaf > garlic peel > coconut shell with maximum Langmuir adsorption capacity of 35.7 mg g^?1 for mango leaf. The treated effluent can be reused. Desorption study suggested effective reuse of the adsorbents up to three cycles, and safe disposal method of the used adsorbents suggested biodegradability and sustainability of the process by reapplication of the spent adsorbent and ultimately leading towards zero wastages. The performances of the adsorbents were verified with wastewater from electroplating industry. The scale-up study reported for industrial applications. ANN modelling using multilayer perception with gradient descent (GD) and Levenberg-Marquart (LM) algorithm had been successfully used for prediction of Cr(VI) removal efficiency. The study explores the undiscovered potential of the natural waste materials for sustainable existence of small and medium sector industries, especially in the third world countries by protecting the environment by eco-innovation.     

A comparative study of macrobenthic community from harbours along the central west coast of India

Harbours are heavily stressed coastal habitats characterised by high concentration of contaminant and low diversity of benthic community. The west coast of India harbours most of the major harbours compared to the east coast. Very few studies have compared the macrobenthic community between different Indian harbours. The present study was therefore conducted in three important harbour (Ratnagiri, Goa, Karwar) along the central west coast of India. The paper discusses the health status of the three harbours diagnosed using various biotic indices. Sediment samples were collected using van Veen grab (0.11 m(2)) on board CRV Sagar Sukti. A total of 55 macrobenthic taxa were identified and were numerically dominated by polychaete. Biomass was high (0.14-145.7 g m(-2)) and was made largely by echiurans (>80%). Overall, polychaete dominated the macrobenthic diversity. Opportunistic P.pinnata, Notomastus sp. and Mediomastus sp., dominated the macrobenthic community responding to the increased in the harbour. Biotic indices (Polychaete:Amphipod ratio, ABC curve and geometric class abundance) and the dominance of opportunistic species indicate that, the three harbours are under stress from anthropogenic activities.     

Sol-gel-derived transparent metal oxide flexible field effect transistors

Environmental Science and Pollution Research - ZnO and ZnO:Al thin films have been successfully synthesized by simple solution processable method at low temperature. Highly crystalline (002)...     

Postural Stability of Sitting Women

The study examined the utility of stabilometric dimensions and explored whether the changes in sitting postures were manifested in functional measures of postural control. Eleven women participated in the study, which used 11 chair sitting postures: arms on laps or arms right angled; armrest at a height of 17, 20 and 23 cm; with or without backrest; slouch or straight back; legs right angled at knees or crossed legs. The backrest and armrest shifted 16.3% of body weight from a seat pan. The characteristics of stabilometric dimensions evaluated the influence of seat components and sitting behaviour on postural balance. The study attempted to evaluate stability and its application in human-seat interface design.     

Disparity of a Seat Cushion and Its Influence on Postural Control

Properties of supporting surfaces of a seat have an influence on postural control. Centre of pressure (COP) displacement parameters reflect both the balance controlling process and movements of the centre of a mass of entire body. The subjects of the study were 9 healthy men. A seat cushion was examined with a 2-force platform setup. Force exertion at a seat pan and feet and COP displacement at a seat pan were measured to analyse postural control. Analysis of variance determined the differences in postural control depending on a cushion type among the subjects. Significant differences in COP displacement parameters were in COP trajectory length, medio-lateral COP displacement and COP velocity. The results of the study showed that foam cushion ensures better postural control.     

Emission inventory of evaporative emissions of VOCs in four metro cities in India

High concentrations of volatile organic compounds (VOCs) in ambient air of urban areas stress the need for the control of VOC emissions due to the toxic and carcinogenic nature of many VOCs commonly encountered in urban air. Emission inventories are an essential tool in the management of local air quality, which provide a listing of sources of air pollutant emissions within a specific area over a specified period of time. This study intended to provide a level IV emission inventory as par the United States Environmental Protection Agency (USEPA) definition for evaporative VOC emissions in the metro cities of India namely Delhi, Mumbai, Chennai, and Kolkata. The vehicular evaporative emissions are found to be the largest contributor to the total evaporative emissions of hydrocarbons followed by evaporative losses related to petrol loading and unloading activities. Besides vehicle-related activities, other major sources contributing to evaporative emissions of hydrocarbons are surface coating, dry cleaning, graphical art applications, printing (newspaper and computer), and the use of consumer products. Various specific preventive measures are also recommended for reducing the emissions.