Air bag effectiveness as function of impact speed

An investigation was conducted to estimate the effectiveness of air bags as a function of velocity. The study consisted of three parts: a theoretical idealization, an analysis of National Automotive Sampling System/Crashworthiness Data System (NASS/CDS), and a reanalysis of previously published Fatality Analysis Reporting System (FARS) data. The theoretical analysis looked at idealized risk curves as a function of velocity; assuming that the air bag offers a benefit for both belted and unbelted occupants. Analysis of the NASS/CDS data looked at the effectiveness of air bags as a function of velocity for Maximum Abbreviated Injury Scale (MAIS) 3+ injuries. The reanalysis of the previously published FARS data looked at the effectiveness of the air bag as a function of velocity for fatalities. The theoretical analysis indicates that the air bag effectiveness should be greatest at the low velocities. The field data analysis of both NASS/CDS and FARS were consistent with the theoretical analysis, indicating that air bags are most effective at the lower velocities, below 40 kph (25 mph), for both belted and unbelted occupants. Although it was not possible to estimate a different effect for belted and unbelted for fatalities using FARS, it was possible for MAIS 3+ using NASS/CDS. For unbelted occupants the effectiveness goes to zero or becomes negative above 40 kph (25 mph) for MAIS 3+, and for belted occupants the effectiveness stays positive but with significantly lower magnitude for speeds above 40 kph (25 mph).     

Releases of phosphate fertilizer industry in the surrounding environment: Investigation on heavy metals and polonium-210 in soil

Distribution of Cu,Zn,Pb,Cr,Ni,Mn concentrations and the activity of polonium-210 in the surrounding area of a phosphate fertilizer industry located on the eastern coast of the Mediterranean Sea has been determined.Nineteen sampling sites were distributed around the industrial zone on a surface area of about 100,000 m2.Atomic absorption spectroscopy and Alpha spectroscopy were used to quantify the heavy elements and polonium-210,respectively.Investigation on a particle scale was conducted by TEM and SEM coupled to EDX and X-ray cartography to determine the nature of heavy elements carriers and their distribution.Heavy elements were mainly concentrated inside the particle size fraction 50 μm.Their levels decreased with distance increasing from the industry.According to the reference soil,enrichment factors were about 10,15,32 and 100 times for Zn,Pb,Cu,and Cr,respectively inside the particle size fraction 50 μm on the closest sites to the industry.The main contaminant sources were transport and storage of row materials and the free release of phosphogypsum waste.Heavy elements were entrapped inside agglomerates of sulfates,phosphates and iron oxihydroxides in a di used shape.Polonium-210 with an enrichment factor of about 56,showed the same behavior of the spatial distribution of the trace elements.     

Standardising and mapping open-source information for crisis regions: the case of post-conflict Iraq

Painting an accurate picture of the situation on the ground in countries in crisis is vital for the efficiency of humanitarian aid and reconstruction agencies. This study describes a method for standardising and mapping the plethora of open-source information. The test site for the study is post-conflict Iraq. Important information on aid distribution, reconstruction and security in Iraq can be derived from the reports of humanitarian aid agencies and the media, before being formatted, inserted into a database and mapped. The product is a visual, cartographic structure of otherwise random information, showing which organisations are working in the country, which thematic and geographic areas are being prioritized in the field, and which areas most frequently experience security events. This type of mapping not only highlights the overall working environment within different parts of the country, but it may also serve as a decision-making tool for donors and humanitarian aid agencies planning to deploy personnel.     

Use of beetroot fibers to clean water contaminated with heavy metals,to soften hard water,and to desalinate seawater

In this article we describe the use of beetroot fibers in treating water contaminated with heavy metals, in softening hard water, and in desalinating seawater. The study was carried out with either beetroot fibers or powdered fibers using a laboratory column with a fixed bed. The effectiveness of the method and the effect of the pH on it were monitored by atomic absorption spectrometry, infrared spectroscopy, conductivity measurements, and a volumetric method. The optimum pH range for all the treatment was found to be between 6.0 and 6.6. The heavy metals included in this study were lead, copper, nickel, and zinc. The amount of heavy metals retained by the fibers or the powder was significant in each case. The retention capacity was the strongest for lead and the weakest for nickel. In the case of hard water and seawater studies, our experiments revealed a dramatic decrease in total dissolved solids (TDS), indicating the potential of the method as an aid or an alternative to conventional methods.     

Determination and assessment of total mercury levels in local, frozen and canned fish in Lebanon

Fish is an important constituent of the Lebanese diet. However, very little attention in our area is given to bring awareness regarding the effect of the toxicity of mercury (Hg) mainly through fish consumption. This study aimed to report analytical data on total mercury levels in several fish species for the first time in thirty years and to also made individuals aware of the presence and danger from exposure to mercury through fish consumption. Fish samples were selected from local Lebanese markets and fisheries and included 94 samples of which were fresh, frozen, processed, and canned fish. All values were reported as microgram of mercury per gram of fish based on wet weight. The level of mercury ranged from 0.0190 to 0.5700 μg/g in fresh samples, 0.0059 to 0.0665 μg/g in frozen samples, and 0.0305 to 0.1190 μg/g in canned samples. The data clearly showed that higher levels of mercury were detected in local fresh fish as opposed to other types thus placing consumers at higher risk from mercury exposure. Moreover, the data revealed that Mallifa (yellowstripe barracuda/Sphyraena chrysotaenia), Sargous (white seabream/Diplodus sargus), Ghobbos (bogue/Boops hoops), and shrimp (Penaeus sp.) were among the types containing the highest amounts of mercury. On the other hand, processed fish such as fish fillet, fish burger, small shrimp and crab are found to contain lower levels of mercury and are associated with lower exposure risks to mercury. Lebanese population should therefore, be aware to consume limited amounts of fresh local fish to minimize exposure to mercury.     

Releases of phosphate fertilizer industry in the surrounding environment: Investigation on heavy metals and polomum-210 in soil

Distribution of Cu,Zn,Pb,Cr,Ni,Mn concentrations and the activity of polonium-210 in the surrounding area of a phosphate fertilizer industry located on the eastern coast of the Mediterranean Sea has been determined.Nineteen sampling sites were distributed around the industrial zone on a surface area of about 100,000 m2.Atomic absorption spectroscopy and Alpha spectroscopy were used to quantify the heavy elements and polonium-210,respectively.Investigation on a particle scale was conducted by TEM and SEM coupled to EDX and X-ray cartography to determine the nature of heavy elements carders and their distribution.Heavy elements were mainly concentrated inside the particle size fraction ＜ 50μm.Their levels decreased with distance increasing from the industry.According to the reference soil,enrichment factors were about 10,15,32 and 100 times for Zn,Pb,Cu,and Cr,respectively inside the particle size fraction ＜ 50 μm on the closest sites to the industry.The main contaminant sources were transport and storage of row materials and the free release of phosphogypsum waste.Heavy elements were entrapped inside agglomerates of sulfates,phosphates and iron oxihydroxides in a diffused shape.Polonium-210 with an enrichment factor of about 56,showed the same behavior of the spatial distribution of the trace elements.