Improvement of sand filter and constructed wetland design using an environmental decision support system

With the aim of improving effluent quality of waste stabilization ponds, different designs of vertical flow constructed wetlands and intermittent sand filters were tested on an experimental full-scale plant within the framework of a European project. The information extracted from this study was completed and updated with heuristic and bibliographic knowledge. The data and knowledge acquired were difficult to integrate into mathematical models because they involve qualitative information and expert reasoning. Therefore, it was decided to develop an environmental decision support system (EDSS-Filter-Design) as a tool to integrate mathematical models and knowledge-based techniques. This paper describes the development of this support tool, emphasizing the collection of data and knowledge and representation of this information by means of mathematical equations and a rule-based system. The developed support tool provides the main design characteristics of filters: (i) required surface, (ii) media type, and (iii) media depth. These design recommendations are based on wastewater characteristics, applied load, and required treatment level data provided by the user. The results of the EDSS-Filter-Design provide appropriate and useful information and guidelines on how to design filters, according to the expert criteria. The encapsulation of the information into a decision support system reduces the design period and provides a feasible, reasoned, and positively evaluated proposal.     

Calculating overpressure from BLEVE explosions

Although a certain number of authors have analyzed the prediction of boiling liquid expanding vapour explosion (BLEVE) and fireball effects, only very few of them have proposed methodologies for predicting the overpressure from such explosions. In this paper, the methods previously published are discussed and shown to introduce a significant overestimation due to the erroneous thermodynamic assumptions—ideal gas behaviour and isentropic vapour expansion—on which they are based (in fact, they give the maximum value of overpressure which can be caused by a BLEVE). A new approach is proposed, based on the—more realistic—assumption of an adiabatic and irreversible expansion process; the real properties of the substance involved in the explosion are used. The two methods are compared through the application to a given case.     

A Novel Formulation for Designing a Monitoring Strategy: Application to the Design of a River Quality Monitoring System

In this work, we propose a technique to automatically optimize the monitoring of any distributed indicator (concentration of a substance along a river, blood pressure of a patient over time, etc.) for which a reliable estimate is previously available. From a mathematical point of view, the problem is based on obtaining a reliable estimate of the chosen indicator (e.g., by numerical simulation), and then solving a multi-objective optimization problem (with mixed real and integer variables) whose solution must provide an efficient and satisfactory monitoring strategy. As an illustrative case, we show the steps to follow in order to implement that strategy when designing a system for monitoring water quality in a river. Finally, we present and analyze the results when applying the proposed technique to study a real case in the Neuse River (North Carolina, USA).     

Process design optimization and risk analysis

Hazard identification and risk assessment are key aspects in process plant design. They are often applied in the final stages of the process at whatever the cost, unless financial constraints are imposed. However, a much better solution would be to introduce risk analysis earlier by including it in earlier stages of the design process, such as when the cost of a plant and the cost of any accidents that may occur are estimated. In this paper, an optimization methodology is proposed, in which both cost and risk (with a deterministic approach) are taken into account, to improve on the current situation. If a decision variable is chosen, an objective function will be established that makes it possible to analyze variations in overall costs, including the cost of the investment and the cost of accidents. This leads to an optimum situation in which costs are kept to a minimum. Of course, this optimization is subject to constraints, the greatest of which is the fact that risk must not exceed tolerated threshold levels. The procedure is explained and two examples, one involving a toxic release and the other a BLEVE/fireball, are used to illustrate it.     

Distribution of nutrients and AOU in the Mediterranean Water (North Atlantic Ocean)

Water samples were collected in the Northeast Atlantic Ocean (33-37^° N and 11-16^° W) in May 1983, and vertical profiles of chemical and physical parameters allowed us to identify the different water masses. A significant difference in salinity and its maximum can be found at different places and depths, as a consequence of the spreading of the Mediterranean Water (MW) from the Strait of Gibraltar. The apparent oxygen utilization shows a correlation with nutrients in North Atlantic Central Water. The relative percentages of water masses were assessed in order to examine the depth of maximum influence of MW as a function of latitude and to apply this knowledge to the black scabbard fish long-line strategy. The long-line fishing depth location was adapted to the specific MW distribution of the different banks with improvements in the mean catch efficiency. The thickness of the MW prevalence layer has a pronounced decrease to the south. MW influence clearly sinks and decrease to south-west. The highest percentage of the MW was found in the Gorringe Bank area and the lowest in the Madeira area.     

Pentachlorophenol association with fulvic acids from recycled wastes

The apparent water solubility of pentachlorophenol was measured at pH=6 and at 25 degrees C in pure water, aqueous solutions of three salts (NaCl, KNO(3) and CaCl(2) at 0.010, 0.10 and 1.0M) and in aqueous solutions of three fulvic acids samples extracted from a natural soil (sFA), composted sewage sludge (csFA) and composted livestock's material (lsFA). A solubility enhancement method was developed for the measurement of partition coefficients (K(oc), L/kg organic carbon). Pentachlorophenol associates strongly with the fulvic acid samples and the calculated K(oc) were the following (averages and standard deviations): (sFA) (211+/-22) x 10(2), (csFA) (253+/-26) x 10(2), (lsFA) (235+/-10) x 10(2). For comparison purposes the K(oc) for pyrene were also calculated for the three FA samples and were the following: (sFA) (119+/-10) x 10(2), (csFA) (239+/-21) x 10(2), (lsFA) (92+/-10) x 10(2). The analysis of variance (one-way ANOVA) of the effect of the type of FA sample on the solubilization of pentachlorophenol and pyrene shows that this factor causes significant differences on the aqueous solubilization of these two organic substances.     

Predicting the frequency of accidents in port areas by developing event trees from historical analysis

The historical analysis of 828 accidents in port areas, which have been selected from a database, has been used to identify the sequences of the accidents. Processing these data has allowed the event trees and the probability of the various accident scenarios to be determined. By using these event trees and figures detailing the frequency of the events that initiated the accidents, as taken from various authors, the frequency of the accidents has been determined.     

Life cycle assessment tool of electricity generation in Portugal

This paper investigates multi-stakeholder arrangements initiated by businesses and NGOs from the North that aim to enhance a more sustainable agricultural production at specific localities in Southern countries. We aim to better understand the search for concerted action in multi-actor arrangements. Therefore, this paper presents a diagnostic framework with three strategic challenges the partnership projects are facing: linking global economic objectives to local needs, values and interests; bridging public and private interests and responsibilities; and seeking trade-offs between social, environmental and economic values. Starting from the partnerships’ Theory of Change, this diagnostic framework is applied to comparative case studies of partnership projects in the cocoa sector in Indonesia, which are part of a Northern-based public–private partnership to improve farmers’ prospective. It is concluded that the economic reality faced by the farmers differs from that of the Northern actors; collaboration with governments is difficult because of different organizational cultures; and the partnership projects underestimate the strength of vested social relations the smallholders are part of. Overall, the initiators of the partnerships seem to work with a too restricted economic interpretation of the local reality.