A comparison of results from two test methods for assessing the toxicity of aminotriazole to Selenastrum capricornutum

Two different test methods for assessing the toxicity of aminotriazole to Selenastrum capricornutum are compared. Growth medium composition is demonstrated to have a significant effect on the toxicity of aminotriazole.     

Octachlorodibenzo-p-dioxin in wood treatment materials and treated wood

The octachlorodibenzo-p-dioxin (OCDD) concentrations have been determined in aged samples of commercial pentachlorophenol (PCP), in wood protection formulations containing PCP and in wood treated with PCP as a preservative or as an anti-sapstain treatment. The concentrations of OCDD found in the various samples are within the range expected from the amount of commercial PCP initially present in the samples. In view of the known stability of OCDD the results are interpreted as indicating that the formulation, treatment and ageing processes have not led to any substantial conversion of PCP to OCDD; although one result indicates that outdoor exposure of treated samples increased the OCDD concentration by a factor of approximately 2 after $\text{3}\text{1}\text{2}$ years. Analysis of aged samples of treated wood indicate that OCDD is lost much less rapidly from the wood than PCP.     

Analysis of polychlorobiphenyls from used transformers for polychlorodibenzofurans

The results of analyses for polychlorodibenzofuran (PCDF) content in two samples of polychlorobiphenyl (PCB) from used electrical transformers are presented and discussed. In neither sample was there evidence for enhanced PCDF concentrations even though one of them had been subjected to overheating while in service.     

Polychlorodibenzo-p-dioxins and dibenzofurans in technical pentachlorophenol - results of a collaborative analytical exercise

Results of analyses of eight samples of technical pentachlorophenol conducted by three different analytical methods are presented and discussed.     

Computer simulations help determine safe vertical boom speeds for roof bolting in underground coal mines

PROBLEM: Incident investigation reports do not usually contain enough information to aid in studying boom arm vertical speed for roof bolting machines to determine the impact that appendage speed had on an operator's risk of experiencing a contact. Laboratory experiments with human subjects are also not feasible because of safety and ethical issues. METHOD: Researchers successfully developed a three-dimensional computer model that uses virtual human simulation software as the primary means to gather contact data when the boom arm touches the operator's hand, arm, head, or leg. RESULTS: Data analysis of roof bolter simulations shows that the speed of the boom arm is the most important factor in determining the risk of an operator making contact. Regardless of other variables, contact incidents were always greater when the bolter arm was moving up, greater on the hand, and greater for the boom arm part of the machine. The reason why the subject experiences more contacts when the boom arm is moving up rather than down is that more risky behaviors occur during drilling and bolting when the boom arm is ascending. Based on the data collected, boom speeds greater than 13 in/sec result in a substantial increase in risk to the roof bolter operator of making contact. Speeds less than or equal to 13 in/sec are associated with a more modest relative risk of making contact, which represents a decrease in potential hazard. IMPACT ON INDUSTRY: The use of such information can be quite helpful in making recommendations to machine design and task procedures to reduce the likelihood that roof bolter operators will experience injury due to contact with a moving roof bolting machine's boom arm.     

An investigation of aqueous activity coefficients at low concentrations

The activity of a chemical in solution determines its tendency to move into other media. At low concentrations (<0.01M) it is generally considered to be linearly related to concentration. A hypothetical model based on the structure of liquid water is discussed which could cause deviations from this linearity in the ppb region, a concentration much lower than that normally investigated thermodynamically, but one of great importance environmentally. Headspace experiments are reported with carbon tetrachloride and chloroform in water at concentrations down to ～10^?3 ppb but no such deviations were discerned.     

Long term changes in polychlorodibenzo-p-dioxin concentrations in wood treated with technical pentachlorophenol

Wood samples treated with technical pentachlorophenol (PCP), technical sodium pentachlorophenoxide (NaPCP) and octachlorodibenzo-p-dioxin have been exposed outdoors for periods up to $\text{2}\text{1}\text{2}$ years. Analysis of extracts from the samples show that photolytic reductive dechlorination of highly chlorinated dibenzo-p-dioxins to less chlorinated isomers occurs. However there is no discernible increase in polychlorodibenzo-p-dioxin concentrations in the technical PCP treated wood presumably because further photolytic reactions and volatilisation compete effectively with the photolytic formation. There is no evidence for formation of octachlorodibenzo-p-dioxin (OCDD) in technical PCP treated wood in this study, probably because photolytic destruction and volatilisation compete effectively with formation reactions when the initial OCDD concentration is relatively high.