Assessment of long-term wastewater irrigation impacts on the soil geochemical properties and the bioaccumulation of heavy metals to the agricultural products

An extensive field survey was employed for assessing the impacts of long-term wastewater irrigation of forage crops and orange orchards in three suburban agricultural areas in Cyprus (areas I, II, and III), as compared to rainfed agriculture, on the soil geochemical properties and the bioaccumulation of heavy metals (Zn, Ni, Mn, Cu, Co) to the agricultural products. Both ryegrass fields and orange orchards in areas I and II were continuously wastewater irrigated for 10 years, whereas clover fields in area III for 0.5, 4, and 8 years. The results revealed that wastewater reuse for irrigation caused a slight increase in soil salinity and Cl^? content in areas I and II, and a remarkable increase, having strong correlation with the period in which wastewater irrigation was practiced, in area III. Soil salinization in area III was due to the high electrical conductivity (EC) of the wastewater applied for irrigation, attributed to the influx of seawater to the sewage collection network in area III. In addition, the wastewater irrigation practice resulted in a slight decrease of the soil pH values in area III, while a subtle impact was identified regarding the CaCO₃, Fe, and heavy metal content in the three areas surveyed. The heavy metal content quantified in the forage plants’ above-ground parts was below the critical levels of phytotoxicity and the maximum acceptable concentration in dairy feed, whereas heavy metals quantified in orange fruit pulp were below the maximum permissible levels (MPLs). Heavy metal phytoavailability was confined due to soil properties (high pH and clay content), as evidenced by the calculated low transfer factor (TF).     

Have flood mortality qualitative characteristics changed during the last decades? The case study of Greece

Despite the dramatic increase in recorded flood events in Greece in the last decades, recent findings show that related mortality does not show a corresponding rise. This work develops and studies a database of flood-related fatalities to investigate qualitative changes in flood mortality in the country between 1960 and 2010. Observations show a shift in the circumstances under which fatal incidents occurred and in the demographics of the victims. In particular, indoor fatalities and cases in urban environments gradually decrease in favour of incidents occurring outdoors, in rural settings, mostly using motor vehicles. The number of fatalities per flood event show a decline, indicating that multiple-fatality incidents are gradually disappearing and that advances in protection have an impact on mortality. The increase in the use of vehicles, the improvements in the structural integrity of buildings and the advances in early warning and civil protection practices are found to influence mortality both in qualitative and in quantitative terms.     

Valuation of natural marine ecosystems: an economic perspective

This paper attempts to examine whether information from valuation studies can help the design of policies adequate to reverse and halt the generally poor state of marine and coastal ecosystems of the Mediterranean and the Black Sea. Economic implications of managing coastal and marine environments are thus discussed by assessing the results of different valuation studies implemented in the area. Lessons and policy recommendations from existing literature are inferred to guide marine resources management decisions. One of our main findings is that there are extremely few published studies within the Mediterranean and Black Sea region which highlights the potential for future research on coastal and marine ecosystems ability to sustain different goods and services as a result of climate change and anthropogenic drivers in the area. However, results reveal that there are substantial positive economic values attached to marketed and non-marketed services provided by marine and coastal ecosystems that justify their sustainable use and management.     

Joint use of data and modeling in coastal wave transformation

In the framework of a research project entitled ??BRISA??BReaking waves and Induced SAnd transport??, a methodology was devised to characterize the waves joining together in-situ measurements and numerical wave propagation models. With this goal in mind, a number of in-situ measurements were made, for selected positions in front of Praia de Faro (South Portugal), during four days (25th to 28th March, 2009) by using different types of equipments (e.g., resistive wave gauges, pressure sensors, currentmeters and a new prototype pore pressure sensor using optical fibre). Wave records were obtained simultaneously offshore (at a water depth of 11.7?m below mean sea level, MSL) and at the surf and swash zones. The data processing and analysis were made by applying classical time domain techniques. Numerical simulations of the wave propagation between offshore and inshore for the measurement period were performed with two numerical models, a 1D model based on linear theory and a nonlinear Boussinesq-type model, COULWAVE, both forced by the measured offshore wave conditions of 27th March 2009. Comparisons between numerical results and field data for the pressure sensors placed in the surf and swash zones were made and discussed. This approach enables to evaluate the performance of those models to simulate those specific conditions, but also to validate the models by gaining confidence on their use in other conditions.     

Advantages and possibilities of solid recovered fuel cocombustion in the European energy sector

The 1999/31 Elemental Carbon Directive sets strict rules on the disposal of untreated municipal solid waste in the European Union countries and forces a reduction of the biodegradable quantities disposed off to landfills up to 35% of the amount produced in 1995 in the coming decade. More environmentally friendly waste management options shall be promoted under the framework of the Community Waste Strategy ([96] 399 Final). In this context, the production and thermal use of solid recovered fuels (SRFs), derived from nonhazardous bioresidues and mixed- and mono-waste streams, could be a key element in a future waste management system. Within the scope of the European Demonstration Project, RECOFUEL, SRF cocombustion was demonstrated in two large-scale lignite-fired coal boilers at RWE power station in Weisweiler, Germany. As a consequence of the high biogenic share of the cocombusted material, this approach can be considered beneficial following European Directive 2001/77/EC on electricity from renewable energy sources (directive). During the experimental campaign, the share of SRF in the overall thermal input was adjusted to approximately 2%, resulting into a feeding rate of approximately 25 t/hr. The measurement campaign included boiler measurements in different locations, fuel and ash sampling, and its characterization. The corrosion rates were monitored by dedicated corrosion probes. The overall results showed no significant influence of SRF cocombustion on boiler operation, emissions behavior, and residues quality for the thermal shares applied. Also, no effect of the increased chlorine concentration of the recovered fuel was observed in the flue gas path after the desulfurization unit.     

Interrelationships of pollution load index, transfer factor, and concentration factor under the effect of sludge

A greenhouse experiment was conducted during 2010–2011. A complete randomized blocks design was used including seven treatment levels of sludge(tons per hectare), i.e., 0, 6, 12, 18, 24, 30, and “30+ treated wastewater”, in four replications. Lettuce (Lactuca sativa L var longifolia) was chosen as a test plant. The purpose of the experiment was to study the relationships between soil Pollution Load Index, heavy metal transfer factor, and concentration factor and to determine optimum concentration factor values. The following were found: several mathematical relationships were established between the above parameters that could be used for the study of heavy metal accumulation in soils and plants under the effect of the applied sludge. They can be also used for the calculation of one of the above parameters as a function of the others. Based on the experimental data, the optimum concentration factor for several heavy metals were determined by multiple linear regression analysis, expressing the concentration factor as a function of the maximum dry lettuce matter yield, and of optimum/minimum heavy metal content of plant dry matter. The mean value of the calculated concentration factor obtained for each separate metal was: Zn, 2.93; Cd, 0.39; Co, 1.47; and Ni, 0.52.     

Evaluating contamination of dredges and disposal criteria in Greek coastal areas

Sediments were collected from areas that were going to be dredged located at six small Greek ports, as well as from possible disposal areas. In order to assess the contamination level of dredged material, the samples were analysed for pH, organic matter, the metals Cd, Pb, Hg, Cr, Ni, Cu, Zn and major organic compounds (PAHs, PCBs). The sediments' quality was evaluated by two approaches: (i) by classifying each area according to two sets of Sediment Quality Guidelines (SQGs) and (ii) by calculating the contamination factors and degree for each area. The results showed that organic compounds were detected in trace amounts in 14% of the port samples belonging to the PAHs group. The characterization of the sediment samples was based on the metals' concentration showing that the majority of the areas to be dredged (80%) are classified as of medium-low contamination according to the SQGs. However, according to the contamination degree, only 30% of the areas are classified as of low contamination, while 40% as of moderate contamination and 30% of the areas as of considerable contamination. From the point of view of "no disturbance" of the ecosystem, decisions about dumping should be taken only after evaluating the material to be dredged. If the SQGs are exceeded, dumping must be forbidden. Otherwise, further evaluation is needed based on the comparison with the receiving area, i.e. by estimating the contamination degree. Dumping could be allowed if the contamination degree is found to be below moderate.     

Population development of the invader ctenophore Mnemiopsis leidyi, in the Black Sea and in other seas of the Mediterranean basin

In the last two decades of the twentieth century, the ctenophore Mnemiopsis leidyi (A. Agassiz) has invaded the Black, Azov, Marmara and Aegean Seas, and, recently, the Caspian Sea. Here, we compare its spatial and temporal distribution, seasonal dynamics and the time and duration of reproduction. We also discuss factors that control its abundance throughout its invasive range and its effect on ecosystems. Observations are based on the long-term field data collected by three research institutes. An analysis of the effects of temperature, salinity, prey (zoo- and ichthyoplankton) availability and predation (by ctenophores of the genus Beroe) on M. leidyi population size, and the effects of M. leidyi on zoo- and ichthyoplankton, and on fish populations in the Black and Azov Seas is also provided. With the Black Sea current, M. leidyi spreads to the upper layers of the Sea of Marmara, where it now occurs around the year. At regular intervals, the Black Sea current also takes it to the northern Aegean Sea. In contrast, it has to re-invade the Sea of Azov every spring or summer, dying out during winter when the temperature drops below 4°C. The warm summer and mild winter temperatures, relatively low salinity and abundance of prey in the Black Sea are close to optimal for M. leidyi, while they are suboptimal in the northern Aegean Sea, where salinity and temperature are often too high. In the Black Sea the absence of gelatinous and other predators led to an enormous ctenophore abundance for a decade, but with the appearance of Beroe ovata in 1999, M. leidyi abundance greatly decreased. Analysis of seasonal dynamics of M. leidyi in the Black Sea and in other seas of the Mediterranean basin indicates similarities in the timing of maximum abundance and biomass, in spite of some differences in the initiation and duration of reproduction. A peak biomass and density occurred in 1989 in the Black and Azov Seas and in 1990 in the other seas. The M. leidyi invasion negatively affected the ecosystems of the Black Sea and the Sea of Azov. The zooplankton, ichthyoplankton and zooplanktivorous fish stocks all underwent profound changes. Similar effects, but less pronounced, were recorded in the Sea of Marmara. Effects on Mediterranean food chains have, so far, remained insignificant. Salinity is probably supraoptimal here, and several predators prevent M. leidyi from reaching outbreak levels.     

Converting environmental risks to benefits by using spent coffee grounds (SCG) as a valuable resource

Coffee is perhaps one of the most vital ingredients in humans’ daily life in modern world. However, this causes the production of million tons of relevant wastes, i.e., plastic cups, aluminum capsules, coffee chaff (silver skin), and spent coffee grounds (SCG), all thrown untreated into landfills. It is estimated that 1 kg of instant coffee generates around 2 kg of wet SCG; a relatively unique organic waste stream, with little to no contamination, separated directly in the source by the coffee shops. The produced waste has been under researchers’ microscope as a useful feedstock for a number of promising applications. SCG is considered a valuable, nutrients rich source of bioactive compounds (e.g., phenolics, flavonoids, carotenoids, lipids, chlorogenic and protocatechuic acid, melanoidins, diterpenes, xanthines, vitamin precursors, etc.) and a useful resource material in other processes (e.g., soil improver and compost, heavy metals absorbent, biochar, biodiesel, pellets, cosmetics, food, and deodorization products). This paper aims to provide a holistic approach for the SCG waste management, highlighting a series of processes and applications in environmental solutions, food industry, and agricultural sector. Thus, the latest developments and approaches of SCG waste management are reviewed and discussed.     

Concentrations of persistent organic pollutants and organic matter characteristics as river sediment quality indices

Selected persistent organic pollutants – polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and organochlorine pesticides – were determined in sediments, soils, and crops from the Asopos River area, Greece. The river has been receiving industrial effluents for the last 40 years and has been recently found to be polluted with metals. Sediments were collected in the dry (May) and wet (February) season. Agricultural soils and cultivated crops were sampled from adjacent fields. Polychlorinated biphenyls were below the limit of detection in all samples. In one tomato and two soil samples, DDT and DDE were found. Polycyclic aromatic hydrocarbons were observed in 5% of the sediments and in concentrations ranging from 4 to 57 μg kg^?1 dry weight, quite below sediment quality guidelines. Diagnostic ratios of polycyclic aromatic hydrocarbons indicated a strong influence of petrogenic point discharges. In the sediments, silicate minerals dominate over carbonates and the organic carbon content ranges from 0.4% to 3.5%, more than 70% being of natural origin. Compared to other rivers worldwide, the Asopos River was found to be not contaminated with persistent organic pollutants. Point loadings of organic pollutants were evident but continuous discharge is not occurring throughout the river basin.