Modelling the Balance of Metals in the Amended Soil for the Case of ‘Atmosphere–Plant–Soil’ System

Changing the concepts of economic development and introducing new amendments can hardly decrease the accumulation in the soil of such pollutants as metals, remaining there for a long time. The predictive models for describing the balance of metals in the soil, which are based on the ‘atmosphere–plant–soil’ system and reflect the complicated physical–chemical nature of the metals’ migration, expressed by coefficients obtained in long-term observations in natural conditions, allow for evaluating long-term concentration of metals in the soil. The model BALANS evaluates self-purification of soil, taking into account the uptake of metals of aerogenic origin by the soil together with amendments, their physical–chemical migration and the type of microrelief determining its intensity as well as the absorbed biomass of plants and the removal of metals with crops. In this model, the half-period of metals’ washing out from the soil, found for the microrelief characteristic of low places, exceeds 200 years for Ni, Cr and Pb and makes 90 and 150 years for Zn and Cu, respectively.     

Atmospheric BTEX concentrations in the vicinity of the crude oil refinery of the Baltic region

Among chemical industries, petroleum refineries have been identified as large emitters of a wide variety of pollutants. Benzene, toluene, ethylbenzene, and xylene (BTEX) form an important group of aromatic volatile organic compounds (VOCs) because of their role in the troposphere chemistry and the risk posed to human health. A very large crude oil refinery of the Baltic States (200,000 bbl/day) is situated in the northern, rural part of Lithuania, 10 km from the town of Ma?eikiai (Lithuania). The objectives of this study were: (1) to determine of atmospheric levels of BTEX in the region rural and urban parts at the vicinity of the crude oil refinery; and (2) to investigate the effect of meteorological parameters (wind speed, wind direction, temperature, pressure, humidity) on the concentrations measured. The averaged concentration of benzene varied from 2.12 ppbv in the rural areas to 2.75 ppbv in the urban areas where the traffic was determined to be a dominant source of BTEX emissions. Our study showed that concentration of benzene, as strictly regulated air pollutant by EU Directive 2008/50/EC, did not exceed the limit of 5 ppbv in the region in the vicinity of the crude oil refinery during the investigated period. No significant change in air quality in the vicinity of the oil refinery was discovered, however, an impact of the industry on the background air quality was detected. The T/B ratio (0.50-0.81) that was much lower than 2.0, identified other sources of pollution than traffic.     

A biochar-based medium in the biofiltration system: Removal efficiency,microorganism propagation,and the medium penetration modeling

Biofiltration is a method of biological treatment belonging to cleaner technologies because it does not produce secondary air pollutants, but helps to integrate natural processes in microorganisms for decomposing volatile air pollutants and solving odor problems. The birch wood biochar has been chosen as a principal material for biofilter bed medium. The experiments were conducted at the temperatures of 24, 28, and 32 °C, while the concentration of acetone, xylene, and ammonium reached 300 mg/m³ and the flow rate was 100 m³/hr. Before passing through the stage of the experimental research into the packing material inside biofilters, microorganisms were introduced. Four strains of microorganisms (including micromycetes Aspergillus versicolor BF-4 and Cladosporium herbarum 7KA, as well as yeast Exophiala sp. BF1 and bacterium Bacillus subtilis B20) were selected. At the inlet loading rate of 120 g/m³/hr, the highest elimination capacity of xylene in the biochar-based biofilter with the inoculated medium was 103 g/m³/hr, whereas that of ammonia was 102 g/m³/hr and that of acetone was 97 g/m³/hr, respectively. The maximum removal efficiency reached 86%, 85%, and 81%, respectively. The temperature condition (though characterized by some rapid changes) can hardly have a considerable influence on the biological effect (i.e., microbiological activity) of biofiltration; however, it can cause the changes in physical properties (e.g., solubility) of the investigated compounds.

Implications: The birch biochar can be successfully used in the biofiltration system for propagation of inoculated microorganisms, biodegrading acetone, xylene, and ammonia. At the inlet loading rate of 120 g/m³/hr, the highest elimination capacity of xylene was 103 g/m³/hr, that of ammonia was 102 g/m³/hr, and that of acetone was 97 g/m³/hr, respectively. The morphological structure of biochar can be affected by the aggressive air contaminants, causing the change in the medium specific surface area, which is one of the factors controlling the biofilter performance. Although biological effects in biofiltration are typically considered to be more important than physical effects, the former may be more important for compounds with high Henry’s Law coefficient values, and the biofilter design should thus provide conditions for better compound absorption.     

Integrated evaluation of aerogenic pollution by air-transported heavy metals (Pb, Cd, Ni, Zn, Mn and Cu) in the analysis of the main deposit media

The composition of the ambient air is constantly changing; therefore, the monitoring of ambient air quality to detect the changes caused by aerogenic pollutants makes the essential part of general environmental monitoring. To achieve more effective improvement of the ambient air quality, the Directive 2008/50/EC on ‘Ambient Air Quality and Cleaner Air for Europe’ was adopted by the European Parliament and the European Council. It informed the public and enterprises about a negative effect of pollution on humans, animals and plants, as well as about the need for monitoring aerogenic pollutants not only at the continuous monitoring stations but also by using indicator methods, i.e. by analysing natural deposit media. The problem of determining the relationship between the accumulation level of pollutants by a deposit medium and the level of air pollution and its risks is constantly growing in importance. The paper presents a comprehensive analysis of the response of the main four deposit media, i.e. snow cover, soil, pine bark and epigeic mosses, to the long-term pollution by aerogenic pollutants which can be observed in the area of oil refinery influence. Based on the quantitative expressions of the amounts of the accumulated pollutants in the deposit media, the territory of the oil refinery investigated in this paper has been referred to the areas of mild or moderate pollution.     

Mathematical modeling of biofiltration in activated pine-bark charge of a biofilter

Aim, Scope and Background Human economic activities cause emissions of various pollutants of an organic nature: butanol, butyl acetate, methanol, formaldehyde, phenol, benzene, toluene, xylene, etc. These compounds are emitted to atmosphere by various enterprises of food, chemistry, wood processing industries, from transportation means, agricultural enterprises, etc. Therefore, when purifying air from these pollutants, it is necessary to apply efficient and inexpensive air purification methods. In this dimension, the biological air purification is chosen from all possible air cleaning methods. An experimental biofilter with the activated charge of pine bark was developed at the Department of Environment Protection of the Vilnius Gediminas Technical University. In the course of the experimental investigation, it was determined that this air purification method is efficient. Filter efficiency, when purifying air of volatile organic compounds (butanol, butyl acetate and xylene), to a great extent, depending on the nature and concentrations (up to 100 mg/m3) of pollutants injected, might go up to 70-98%. The mathematical model of the biofilter was developed based on the research results and fully taking into consideration physical, chemical, and biological processes going on during its operations. Main Features The aim of this article is to determine biodegradation constant , absorption capacity , and half empiric expressions of filter efficiency. Knowing this, it is possible to find out the dependence of the filter efficiency on the operational parameters of the filter (i.e. on the concentrations and the height of biocharge of the initial pollutants (butanol, butyl acetate, xylene) fed through it). Conclusions With the help of mathematical modeling, the biodegradation constants and absorption capability of volatile organic compounds (butanol, butyl acetate, and xylene) fed into the biofilter charged with the activated pine bark and used for the cleaning of volatile organic compounds, as well as the efficiency of the biofilter in half empiric expression, have been established. It has been discovered that the constant of pollutant biodegradation is a value inverse to the time during which the amount of pollutants in the filter becomes times higher. It is rather complicated to carry out theoretical calculation of the biodegradation constant at a molecular level, therefore this constant has been established based on the results obtained in the course of research. The equations describing pollutant dynamics in the filter charge and the air cleaning processes going on in it have been derived from diffusion equations in a mobile medium. The modeling helped to find out the absorption capacity of the examined pollutants, which by its numeric value is equal to the volume unit of the absorbed gas amount. The latter factor, the same as the biodegradation constant, was determined basing on the experimental results. Mathematical modeling brought a range of formulas expressing dependences of each pollutant's efficiency on its initial concentrations and filter charge height. Recommendation /Outlook. Based on the experimental data, a mathematical model has been developed which will allow the measuring of the filter efficiency not only with regard to the absorption and biodegradation of the pollutants under examination, but also with regard to other pollutants and their compounds, etc., having an impact on the filter performance. The results of the mathematical modeling have revealed that the modeling of processes going on in the filter is much simpler than isthe performance of long and costly experiments. The developed mathematical model makes it possible to measure the filter efficiency at the present moment.     

Adsorption Air Cleaning From Ozone

Not much has been written about air cleaning from ozone. The aim of this paper was to demonstrate the possibility of adsorption air cleaning from ozone. The second aim was to investigate the dependence of the efficiency of ozone removal from the air on the height of the adsorber layer and on concentrations of ozone, and to obtain empirical formulas for calculating the efficiency of ozone treatment. Equipment for air cleaning from ozone and nitrogen and sulphur dioxides is suggested.     

Characteristics of the Workforce and Activity Optimization in the Building Industries of Lithuania

The evaluation of human individual characteristics is very important for any ergotechnical system optimization, especially in occupational safety. Investigations were carried out for this purpose. An important classification of ergonomic characteristics for construction workers was prepared. The importance and relevance of the choice of those characteristics as well as their application are presented in the article.     

Habitat quality affects stress responses and survival in a bird wintering under extremely low ambient temperatures

Animals normally respond to stressful environmental stimuli by releasing glucocorticoid hormones. We investigated whether baseline corticosterone (CORT), handling-induced corticosterone concentration(s), and body condition indices of members of willow tit (Poecile montanus) groups differed while wintering in old growth forests and managed young forests in mild weather conditions and during cold spells. Willow tits spend the winter season in non-kin groups in which dominant individuals typically claim their priority to access resources, while subordinate individuals may experience greater levels of stress and higher mortality, especially during cold spells. We captured birds to measure baseline CORT and levels of handling-induced CORT secretion after 20 min of capture. Willow tits in the young forests had higher baseline CORT and a smaller increase in CORT in response to capture than individuals in the old forests. Baseline CORT was higher in females and juvenile birds compared to adult males, whereas handling-induced CORT secretion did not differ between birds of different ages. During cold spells, baseline CORT of willow tits increased and handling-induced CORT secretion decreased, especially in birds in young forests. Willow tits’ survival was higher in the old forests, with dominant individuals surviving better than subordinates. Our results show that changes in CORT secretion reflect responses to habitat quality and climate harshness, indicating young managed coniferous forests as a suboptimal habitat for the willow tit.