Application of magnetic field and iron in order to change medicinal products of <Emphasis Type="Italic">Ocimum basilicum</Emphasis>

In the present research, the effects of static magnetic field, with or without iron on the growth, the activity of certain enzymes (like polyphenol oxidase and phenyle alanine ammonialyase), the content of phenolic compounds and the essential oil composition of sweet basil (Ocimum basilicum) were studied. Treatment of plants with static magnetic field with or without iron led to decrease of the growth of plants as well as decrease in the activity of phenyle alanine ammonialyase and of phenolic compounds content. In addition in those plants exposed to magnetic field the amount of essential oils, notably of methyl chavicol, was increased. Exposure of plants to the magnetic field decreased the activity of polyphenol oxidase, whereas treatment of plants with iron when exposed to magnetic field increased polyphenol oxidase activity. In this group the content of essential oil was reduced.     

Review of state of the art methods for measuring water in landfills

In recent years several types of sensors and measurement techniques have been developed for measuring the moisture content, water saturation, or the volumetric water content of landfilled wastes. In this work, we review several of the most promising techniques. The basic principles behind each technique are discussed and field applications of the techniques are presented, including cost estimates. For several sensors, previously unpublished data are given. Neutron probes, electrical resistivity (impedance) sensors, time domain reflectometry (TDR) sensors, and the partitioning gas tracer technique (PGTT) were field tested with results compared to gravimetric measurements or estimates of the volumetric water content or moisture content. Neutron probes were not able to accurately measure the volumetric water content, but could track changes in moisture conditions. Electrical resistivity and TDR sensors tended to provide biased estimates, with instrument-determined moisture contents larger than independent estimates. While the PGTT resulted in relatively accurate measurements, electrical resistivity and TDR sensors provide more rapid results and are better suited for tracking infiltration fronts. Fiber optic sensors and electrical resistivity tomography hold promise for measuring water distributions in situ, particularly during infiltration events, but have not been tested with independent measurements to quantify their accuracy. Additional work is recommended to advance the development of some of these instruments and to acquire an improved understanding of liquid movement in landfills by application of the most promising techniques in the field.     

Trichoderma atroviride as a bioremediator of Cu pollution: An in vitro study

Isolated Trichoderma atroviride from Cu-polluted river sediment at the Serdang Industrial Area was studied under in vitro conditions to understand the mechanisms that allowed the fungi to thrive in the Cu-polluted freshwater ecosystem. From this study, adsorption was recognized as the main mechanism of Cu tolerance with 50–85% adsorption during the in vitro experiment. The uptake capacity of the isolate in liquid medium ranged from 0.8 to 11.2 mg g^?1 in the potato dextrose broth medium with increasing Cu concentrations from 25 to 300 mg L^?1. It was found that 2.7–5.0% of Cu was lost due to washing. The high percentage of Cu adsorption and the high uptake capacity of Cu by T. atroviride suggest that it is a potential bioremediator of Cu. However, further studies are needed to confirm its practical use as a bioremediating agent for Cu under field conditions.     

The time of appearance and disappearance of fetal DNA from the maternal circulation

A single copy Y-chromosome DNA sequence was amplified using the polymerase chain reaction (PCR) from the peripheral blood of 30 women who had achieved a pregnancy through an in vitro fertilization (IVF) programme. The time of conception was known precisely and was confirmed by serial ultrasound scans. Conceptions were dated as the number of weeks after fertilization plus 2, to give a time equivalent to the obstetric menstrual dating of the pregnancy (LMP). Y-chromosome-specific DNA was detected in all pregnancies with a male fetus (18/30). The earliest detection was at 4 weeks and 5 days, and the latest at 7 weeks and 1 day. Y-chromosome-specific sequences were no longer detected in any of the male pregnancies 8 weeks after delivery. No Y-chromosome sequences were detected in any of the pregnancies where only female babies were delivered. This demonstrates that fetal DNA appears in the maternal circulation early in the first trimester, that it can be identified in all pregnancies tested by 7 weeks, that it continues to be present throughout pregnancy, and that it has been cleared from the maternal circulation 2 months after parturition. Early non-invasive prenatal diagnosis for aneuploidies and inherited disorders will be possible in all pregnancies if fetal cells can be isolated free from maternal contamination (or identified accurately in the presence of maternal cells) without problems of contamination from previous pregnancies.     

Chlorinated Solvents: Will the Alternatives be Safer?

Over the next decade, use of chlorinated solvents, a widely employed class of chemicals, will decline significantly because of increasingly stringent environmental regulations. These solvents pose certain health and environmental problems and they have been heavily scrutinized. The alternatives to the solvents are being adopted without controls. In some cases, these substances will pose other health and environmental problems that are likely to be as serious; in other cases, the alternatives have not been examined for their health and environmental effects at all. This case study demonstrates that regulations on chlorinated solvents and their potential alternatives are inconsistent with one another and conflicting.     

Photoacoustic infrared spectroscopy for conducting gas tracer tests and measuring water saturations in landfills

Gas tracer tests can be used to determine gas flow patterns within landfills, quantify volatile contaminant residence time, and measure water within refuse. While gas chromatography (GC) has been traditionally used to analyze gas tracers in refuse, photoacoustic spectroscopy (PAS) might allow real-time measurements with reduced personnel costs and greater mobility and ease of use. Laboratory and field experiments were conducted to evaluate the efficacy of PAS for conducting gas tracer tests in landfills. Two tracer gases, difluoromethane (DFM) and sulfur hexafluoride (SF₆), were measured with a commercial PAS instrument. Relative measurement errors were invariant with tracer concentration but influenced by background gas: errors were 1-3% in landfill gas but 4-5% in air. Two partitioning gas tracer tests were conducted in an aerobic landfill, and limits of detection (LODs) were 3-4 times larger for DFM with PAS versus GC due to temporal changes in background signals. While higher LODs can be compensated by injecting larger tracer mass, changes in background signals increased the uncertainty in measured water saturations by up to 25% over comparable GC methods. PAS has distinct advantages over GC with respect to personnel costs and ease of use, although for field applications GC analyses of select samples are recommended to quantify instrument interferences.     

Mitigating methane emissions and air intrusion in heterogeneous landfills with a high permeability layer

Spatially variable refuse gas permeability and landfill gas (LFG) generation rate, cracking of the soil cover, and reduced refuse gas permeability because of liquid addition can all affect CH₄ collection efficiency when intermediate landfill covers are installed. A new gas collection system that includes a near-surface high permeability layer beneath the landfill cover was evaluated for enhancing capture of LFG and mitigating CH₄ emissions. Simulations of gas transport in two-dimensional domains demonstrated that the permeable layer reduces CH₄ emissions up to a factor of 2 for particular spatially variable gas permeability fields. When individual macrocracks formed in the cover soil and the permeable layer was absent, CH₄ emissions increased to as much as 24% of the total CH₄ generated, double the emissions when the permeable layer was installed. CH₄ oxidation in the cover soil was also much more uniform when the permeable layer was present: local percentages of CH₄ oxidized varied between 94% and 100% across the soil cover with the permeable layer, but ranged from 10% to 100% without this layer for some test cases. However, the permeable layer had a minor effect on CH₄ emissions and CH₄ oxidation in the cover soil when the ratio of the gas permeability of the cover soil to the mean refuse gas permeability ?0.05. The modeling approach employed in this study may be used to assess the utility of other LFG collection systems and management practices.     

DNA damage in workers exposed to formaldehyde at concentrations below occupational exposure limits

Formaldehyde has been classified in group 1 as a potential source of human carcinogen by the International Agency for Research on Cancer. In this study, we evaluated the DNA damage in workers who were occupationally exposed to formaldehyde during the manufacture of melamine dinnerware.

Age, sex, smoking habits, and socioeconomic status were matched by the controls (n = 34) of workers not occupationally exposed to formaldehyde. The median value of formaldehyde time weighted average exposure in three workshops was 0.086 mg/m³. No significant difference was observed between sex and smoking habit in the assessed workers. Alkaline comet assay of peripheral blood lymphocytes was used to determine the DNA damage in the subjects. Olive moment was significantly higher in the exposed group compared with the control group.

Overall, the results suggest that respiratory exposure to low concentrations of formaldehyde causes DNA damage in peripheral blood lymphocyte. Therefore, exposure to formaldehyde should be reduced to the lowest possible level.