Application of a checklist for quality assistance in environmental modelling to an energy model

Large, complex energy models present considerable challenges to develop and test. Uncertainty assessments of such models provide only partial guidance on the quality of the results. We have developed a model quality assistance checklist to aid in this purpose. The model checklist provides diagnostic output in the form of a set of pitfalls for the model application. The checklist is applied here to an energy model for the problem of assessing energy use and greenhouse gas emissions. Use of the checklist suggests that results on this issue are contingent on a number of assumptions that are highly value-laden. When these assumptions are held fixed, the model is deemed capable of producing moderately robust results of relevance to climate policy over the longer term. Checklist responses also indicate that a number of details critical to policy choices or outcomes on this issue are not captured in the model, and model results should therefore be supplemented with alternative analyses.     

Influence of coagulation mechanisms and floc formation on filterability

Minimizing particles in water is a key goal for improving drinking water quality and safety.The media filtration process,as the last step of the solid–liquid separation process,is largely influenced by the characteristics of flocs,which are formed and controlled within the coagulation process.In a laboratory-based study,the impacts of the physical characteristics of flocs formed using aluminum sulfate on the filtration treatment of two comparative water samples were investigated using a photometric dispersion analyzer and a filterability apparatus.In general,the optimum dosage for maximizing filterability was higher than that for minimizing turbidity under neutral p H conditions.For a monomeric aluminum-based coagulant,the charge neutralization mechanism produced better floc characteristics,including floc growth speed and size,than the sweep flocculation mechanism.In addition,the charge neutralization mechanism showed better performance compared to sweep flocculation in terms of DOC removal and floc filterability improvement for both waters,and showed superiority in turbidity removal only when the raw water had high turbidity.For the different mechanisms,the ways that floc characteristics impacted on floc filterability also differed.The low variation in floc size distribution obtained under the charge neutralization mechanism resulted in the flocs being amenable to removal by filtration processes.For the sweep flocculation mechanism,increasing the floc size improved the settling ability of flocs,resulting in higher filter efficiency.     

A model for assessing habitat fragmentation caused by new infrastructures in extensive territories – Evaluation of the impact of the Spanish strategic infrastructure and transport plan

The aim of the present work is to design a model for evaluating the impact of planned infrastructures on species survival at the territorial scale by calculating a connectivity index. The method developed involves determining the effective distance of displacement between patches of the same habitat, simplifying earlier models so that there is no dependence on specific variables for each species. A case study is presented in which the model was used to assess the impact of the forthcoming roads and railways included in the Spanish Strategic Infrastructure and Transport Plan (PEIT, in its Spanish initials).This study took into account the habitats of peninsular Spain, which occupies an area of some 500,000 km². In this territory, the areas deemed to provide natural habitats are defined by Directive 92/43/EEC. The impact of new infrastructures on connectivity was assessed by comparing two scenarios, with and without the plan, for the major new road and railway networks. The calculation of the connectivity index (CI) requires the use of a raster methodology based on the Arc/Info geographical information system (GIS). The actual calculation was performed using a program written in Arc/Info Macro Language (AML); this program is available in FragtULs (Mancebo Quintana, 2007), a set of tools for calculating indicators of fragmentation caused by transport infrastructure (http://topografia.montes.upm.es/fragtuls.html).The indicator of connectivity proposed allows the estimation of the connectivity between all the patches of a territory, with no artificial (non-ecologically based) boundaries imposed. The model proposed appears to be a useful tool for the analysis of fragmentation caused by plans for large territories.     

Pharmacokinetic model of dioxin and furan levels in adipose tissue from Sawmill work involving chlorophenate fungicides

Sawmill workers in British Columbia (B.C.), Canada, have been exposed to chlorophenate fungicides which are known to be contaminated with polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Due to concern about the potential of these workers to have significant body burdens of PCDD/Fs, and the absence of measurements in these worker, a single-compartment pharmacokinetic model was developed to estimate the concentration of PCDD/Fs in the fat tissue of the sawmill workers. Data from a large cohort of B.C. sawmill workers and literature-based data on chlorophenate exposures and PCDD/F concentrations in chlorophenates were used in Monte Carlo simulations to predict a PCDD/F body burden distribution. The median concentrations of HxCDF and HpCDF predicted using the model for the B.C. sawmill worker population exceeded the range measured in unexposed populations. PeCDF and OCDF concentrations exceeded the range measured in unexposed populations at the 70th percentile of the model-predicted distribution, and PeCDD at the 90th percentile. The primary limitation of the model was the scarcity of input data about actual dermal and inhalation exposures to chlorophenates.     

Pigment composition and size distribution of phytoplankton in a confined Mediterranean salt marsh ecosystem

Pigment composition and size distribution of phytoplankton were analysed in a group of Mediterranean salt marshes, where hydrology is dominated by sudden inputs during sea storms, followed by long periods of confinement. These marshes are characterized by a low inorganic–organic nutrient ratio, and inorganic nitrogen is especially scarce due to denitrification. Nutrients were the main factor affecting phytoplankton biomass, while zooplankton grazing did not control either phytoplankton community composition, or their size distribution. The relative abundance of the different phytoplankton groups was analysed by correspondence analysis using the pigment composition measured by high-performance liquid chromatography (HPLC) and analysed with the CHEMTAX programme. In this analysis, phytoplankton pigment composition was correlated with two nutrient gradients. The first gradient was the ratio of nitrate–total nitrogen (TN), since the different phytoplankton groups were distributed according to their eco–physiological differences in nitrogen uptake. The second gradient was correlated with total nutrient loading. Biomass size distributions frequently showed a lack of intermediate sized nanophytoplankton (2.5–4 μm in diameter), and the importance of this lack of intermediate sizes correlated with dinoflagellate biomass. These results suggested that in confined environments, where nutrients are mainly in an organic form, dinoflagellates take advantage of their mixotrophy, by competing and grazing on smaller phytoplankters simultaneously.     

Photoacoustic determination of the thermal properties of bivalve mollusk shells

We used the photoacoustic technique for characterization of the thermal properties of adult shells of American oyster Crassostrea virginica (Gmelin, 1791) and the mussel Ischadium recurvum (Rafinesque, 1820). Heat transport is more efficient in C. virginica than in I. recurvum shells, reflecting the different architecture, microstructure, and composition of the two kinds of shells. Published online: 4 July 2002     

PAH and soot emissions from burning components of medical waste: examination/surgical gloves and cotton pads

This is a laboratory investigation on the emissions from batch combustion of representative infectious ("red bag") medical waste components, such as medical examination latex gloves and sterile cotton pads. Plastics and cloth account for the majority of the red bag wastes by mass and, certainly, by volume. An electrically heated, horizontal muffle furnace was used for batch combustion of small quantities of shredded fuels (0.5-1.5 g) at a gas temperature of approximately 1000 degrees C. The residence time of the post-combustion gases in the furnace was approximately 1 s. At the exit of the furnace, the following emissions were measured: CO, CO2, NOx, particulates and polynuclear aromatic compounds (PACs). The first three gaseous emissions were measured with continuous gas analyzers. Soot and PAC emissions were simultaneously measured by passing the furnace effluent through a filter (to collect condensed-phase PACs) and a bed of XAD-4 adsorbent (to capture gaseous-phase PACs). Analysis involved soxhlet extraction, followed by gas chromatography-mass spectrometry (GC-MS). Results were contrasted with previously measured emissions from batch combustion of pulverized coal and tire-derived fuel (TDF) under similar conditions. Results showed that the particulate soot) and cumulative PAC emissions from batch combustion of latex gloves were more than an order of magnitude higher than those from cotton pads. The following values are indicative of the relative trends (but not necessarily absolute values) in emission yields: 26% of the mass of the latex was converted to soot, 11% of which was condensed PAC. Only 2% of the mass of cotton pads was converted to soot, and only 3% of the weight of that soot was condensed PAC. The PAC yields from latex were comparable to those from TDF. The PAC yields from cotton were higher than those from coal. A notable exception to this trend was that the three-ring gas-phase PAC yields from cotton were more significant than those from latex. Emission yields of CO and CO2 from batch combustion of cotton were, respectively, comparable and higher than those from latex, despite the fact that the carbon content of cotton was half that of latex. This is indicative of the more effective combustion of cotton. Nearly all of the mass of carbon of cotton gasified to CO and CO2 while only small fractions of the carbon in latex were converted to CO2 and CO (20% and 10%, respectively). Yields of NOx from batch combustions of latex and cotton accounted for 15% and 12%, respectively, of the mass of fuel nitrogen indicating that more fuel nitrogen was converted to NOx in the former case, possibly due to higher flame temperatures. No SO2 emissions were detected, indicating that during the fuel-rich combustion of latex, its sulfur content was converted to other compounds (such as H2S) or remained in the soot.     

Pharmaceutical compound removal efficiency by a small constructed wetland located in south Brazil

Environmental Science and Pollution Research - The fate of pharmaceuticals during the treatment of effluents is of major concern since they are not completely degraded and because of their...     

Foraging behavior and habitat use by the Southern Giant Petrel on the Patagonian Shelf

We explored the at-sea behavior and marine habitat use of the Southern Giant Petrel breeding in Patagonia, Argentina by means of satellite telemetry. Adult breeders showed a wide distribution over the Patagonian Shelf, using 74% of its surface. The maximum distance traveled from the colonies was 683 km, but on average birds moved no more than 200 km further away from their colony. Important marine areas were located in the shelf break, middle shelf and coastal waters. Areas of activity by sex overlap between 35 and 94%. Females foraged primarily away from the coast and males mainly on coastal areas. Both sexes were capable of flying up to 4,000 km but most of the foraging trips were of less than 200 km. Our results emphasize the importance of the Patagonian Shelf as foraging habitat for pelagic seabirds and contribute to international efforts to identify and protect a network of marine sites.