Phthalate ester speciation in estuarine water, suspended particulates and sediments

Following earlier work (Al-Omran & Preston, 1987) in which phthalate ester speciation was examined in laboratory studies, the present paper describes the results of an attempt to validate the results by field measurements in the River Mersey Estuary, Liverpool, UK. Samples of water, suspended solids and sediments were analysed for their phthalate ester content. Solid samples were also analysed for their carbon, organic carbon and lipid content. A comparison of the field and laboratory results confirms the association between diethylhexyl phthalate and small particles and shows that other phthalates tend to be associated with relatively coarse, lipid-rich particles. Partition coefficients between dissolved phthalate esters and suspended particles are calculated and compared with other laboratory studies.     

Trends in the dissolution of metals from sediments collected during the Umitaka-Maru cruises using the microwave-acid digestion technique

Sediment samples were collected during the research vessel Umitaka-Maru cruises in the Gulf region from 15–16 December 1993 and 15–27 December 1994, from 19 and 24 locations, respectively. These samples were subjected to trace metal analysis to determine the 1991 Gulf War oil spill environmental impact in the area. The samples investigated are texturally classified into two main sediment classes: sand and mud. The total concentrations of lead, nickel, and vanadium found in the sediments from individual stations were investigated. The differences in trace metal concentrations reflect the variation in the overall composition of their host sediments. To better appraise the trace element composition of their host sediments and to determine the factors governing the trace metal distribution, the data were sub-divided into five groups among 1993 collections and seven groups during 1994. The concentration ranges of all three metals, lead (0.2–4.85), nickel (4.90–86.00), and vanadium (2.00–38.00) varied in different stations among the groups. The partitioning of trace elements between the detrial and non-detrital fractions of the sediments shows that: 1) The high concentrations of elements in mud is coupled with the increase in the detrital fraction; 2) In muddy sand sediments, nickel is bonded to the structural lattice of detrital minerals, whereas vanadium and lead held in the environmentally mobile fraction; and, 3) In sandy mud sediments, Ni is found in the detrital fraction, whereas V to slightly less extent and Pb show their non-detrital nature. The data were compared with unpolluted sediments throughout the ROPME Sea and worldwide, so the effect of anthropogenic enrichment upon the absolute concentration of the elements is minimal.     

Chemically modified biochar produced from conocarpus waste increases NO<Subscript>3</Subscript> removal from aqueous solutions

Biochar has emerged as a universal sorbent for the removal of contaminants from water and soil. However, its efficiency is lower than that of commercially available sorbents. Engineering biochar by chemical modification may improve its sorption efficiency. In this study, conocarpus green waste was chemically modified with magnesium and iron oxides and then subjected to thermal pyrolysis to produce biochar. These chemically modified biochars were tested for NO₃ removal efficiency from aqueous solutions in batch sorption isothermal and kinetic experiments. The results revealed that MgO-biochar outperformed other biochars with a maximum NO₃ sorption capacity of 45.36 mmol kg^?1 predicted by the Langmuir sorption model. The kinetics data were well described by the Type 1 pseudo-second-order model, indicating chemisorption as the dominating mechanism of NO₃ sorption onto biochars. Greater efficiency of MgO-biochar was related to its high specific surface area (391.8 m² g^?1) and formation of strong ionic complexes with NO₃. At an initial pH of 2, more than 89 % NO₃ removal efficiency was observed for all of the biochars. We conclude that chemical modification can alter the surface chemistry of biochar, thereby leading to enhanced sorption capacity compared with simple biochar.     

Quality assessment of various bottled waters marketed in Saudi Arabia

This study focuses on the chemical analysis of the available brands of domestic bottled water in Riyadh City, Saudi Arabia. The distribution of the chemical constituents (major, minor, and trace elements) is determined and compared with the chemical content labeled on the bottles and with drinking water standards of Saudi Arabian, World Health Organization, and U.S. Environmental Protection Agency. The obtained results indicated that except for fluoride and bromate, the concentrations of dissolved salts, soluble cations and anions, nitrate, and trace elements of most bottled waters on sale were within the permissible limits set by standards used. On the other hand, the comparison between determined and reported label values recorded a substantial variation in some parameter values. Results indicated that more than 18 % of the sampled bottled waters exceeded the allowable limits for drinking water. Generated Piper diagrams revealed that the majority of investigated waters were sodium chloride–sulfate type; however, the hydrochemical modeling indicated that all water samples were undersaturated for anhydrite, gypsum, and halite.     

The interactions of phthalate esters with suspended particulate material in fresh and marine waters

The behaviour of six phthalate esters in the presence of particulate material suspended in fresh and saline water has been examined. The adsorption of all phthalates by the particulates is enhanced by the presence of salt. The adsorption process is fairly rapid ( <2-3 h) and the degree of adsorption depends on the characteristics of the particulates. Di-ethylhexyl phthalate is adsorbed most actively by material of a small particle size. The adsorption of other phthalates is more strongly influenced by the chemical composition of the particulates and is most closely correlated with their lipid content.     

Factors associated with medical waste under pandemic situation: a case study of the Kingdom of Bahrain

Journal of Material Cycles and Waste Management - Exploring the factors influencing medical waste generation is vital for proper management due to its hazardous nature. Improper treatment would...