Influence of different textile fibers on characterization of dyeing wastewater and final effluent

Textile industry needs to recover and reuse its wastewater as to fulfil the demand of increasingly strict regulations. The characterization of dyeing wastewater samples according to textile fiber and final textile effluent enables the application of different treatment methods. This study aims to characterize dyeing wastewater in black color of polyamide, polyester, and viscose fibers and final textile effluent. Samples were collected and characterized completely for major pollution indicator parameters. Dyeing wastewater of polyester showed higher values for some parameters, e.g., 4994.44% (49,944,400 mg L^?1 and 917 NTU) of turbidity and 4100.00% of phenol when compared to dyeing wastewater of other fibers. Other parameters such as pH, alkalinity, color, phosphorus, nitrogen, sulfides, chlorides, oil and grease, dissolved solids, and chemical and biochemical oxygen demand were also assessed. In addition to individual characterization, this study also presents a correlation of the contribution of each parameter to the final textile effluent. Although dyeing wastewater of polyamide contributes the most in terms of quantity for the final effluent, this study revealed that dyeing wastewater of polyester influenced the most on the final composition of the textile wastewater when evaluating color, turbidity, total iron, biochemical oxygen demand, chemical oxygen demand, phenol, mercury, oil and grease, and total phosphorus. The present study is focused on bringing new insights to provide future research with other strategies to improve the treatment of dyeing wastewater. In addition, some suggestions are also given for wastewater treatments according to type of textile fiber.     

Experimental approaches for size-based metal speciation in rivers

A review of the different methodologies employed to fractionate and characterize riverine suspended particulate matter is presented. The importance of size-based metal speciation is underlined and the possibility of studying it by the Sedimentation Field Flow Fractionation (SdFFF) technique is illustrated. The studies on the metal load in river Suspended Particulate Matter (SPM) performed over the last ten years are critically reviewed focusing on the different methods employed to collect, concentrate and size-fractionate samples. The fact that there is no homogeneity in methods and data collection in this field is underlined. Among the different fractionation techniques, Field Flow Fractionation (FFF) methodologies have proved to be a good approach to study the role of SPM in metal load and transport. The possibility of studying size-based metal speciation using the SdFFF technique is presented and the importance of metal speciation in rivers is underlined.     

Illicit psychotropic substance contents in the air of Italy

Two in-field campaigns were performed in 2009 to elucidate the contents of illicit psychotropic substances in airborne particulates of Italian cities. Twenty-eight localities of eight Italian regions were investigated in winter, and further eleven sites in June (14 regions in total), thanks to contribution of Regional Environmental Agencies. Cocaine was found almost everywhere, although some sites were rural or suburban. The maximum was recorded in Milan in winter (～0.39 ng m^?3), and “high” values (up to ～0.16 ng m^?3) in other Northern cities and in Rome. Besides cocaine, three cannabinoids will be monitored, namely Δ⁹-tetrahydrocannabinol, cannabidiol and cannabinol. The three compounds often affected the air at lower extents than cocaine, and sometimes resulted absent. Cannabinol accounted for up to 90% of the total. The concentrations of illicit compounds were up to six times lower in June than in winter. This decrease was probably induced by the lowering of boundary layer height typical of winter, and by the oxidizing capacity of atmosphere, which is stronger in the warm season. Compared to n-alkanes, polynuclear aromatic compounds, nicotine, caffeine and airborne particulate, cocaine seemed to follow a peculiar behaviour; in fact, meaningful (≥0.80) Pearson (linear) regression coefficients were calculated from the corresponding concentrations only at local scale (e.g. Rome), and within just one season. Improvements of the method are needed to monitor illicit drug metabolites (e.g. benzoylecgonine, ecgonine methyl ester, 9-carboxy-11-nor-Δ⁹-tetrahydrocannabinol), heroin and semi-volatile amphetamines.     

Physical state and biodegradation behavior of starch-polycaprolactone systems

The biodegradation behavior of insoluble crystalline polymers depends on both chemical structure and physical state. The physical state is strongly affected by the molding conditions; moreover the presence of natural hydrophylic substances such as starch can further influence the biodegradation process. This paper examines the biotic and abiotic degradation of thick injection-molded parts, made of pure poly--caprolactone (PCL) at different molecular weights, and of PCL in the presence of starch in the case of a commercial grade of Mater-Bi, produced by Novamont. The abiotic degradation was studied at 25 and 50°C, whereas the biotic degradation was followed in conditions of SCAS (semicontinuous activated sludges) at 25 and 50°C, soil burial, and controlled composting. The physical-chemical modifications provoked at the surface and in the bulk of the samples by the different types of degradation were determined by differential scanning calorimetry, viscometric and gravimetric analysis, scanning electron microscopy, and dynamic mechanical analysis. The mechanical modifications induced by the different environments were followed by tensile tests. It was demonstrated that the presence of starch significantly increases the apparent biodegradation rate of PCL, making even thick parts of ZI01U compatible with the composting process.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.     

Modelling the long-term behaviour of radiocaesium and radiostrontium in two Italian lakes

The present paper describes the application of a state-of-the-art model to two lakes in central Italy (Trasimeno and Monterosi) for the assessment of migration parameters of (137)Cs and (90)Sr (migration velocity to sediment, transfer rates from sediment to water and to bottom sediment). Applications of a compartment model and a model based on the diffusion equation to predict the behaviour of pollutants in water and through bottom sediment are presented and discussed. The application of the diffusion equation shows some difficulties of a general nature and typical of such a modelling approach. Moreover, there is no evidence of significant improvements of the model performances when the diffusion equation is applied. Very low levels of sedimentation rate of suspended matter in Lake Monterosi were evaluated by the quantitative assessment of radiocaesium migrating to bottom sediment. This suggests that, in this lake, the removal of radionuclide from the water column is mainly due to the turbulent mixing of bottom sediment causing radionuclide burial.     

Detection of a Toxic Product Released by a Polyurethane-Containing Film Using a Composting Test Method Based on a Mineral Bed

The degradation of a film containing a 4,4diphenyl methane diisocyanate (MDI) poly(€-caprolactone)-based polyurethane was followed in a test system based on a mineral solid bed designed to facilitate analysis of break-down products released under composting conditions. The use of a mineral solid bed can help extraction and analytical procedures which could be hindered by the heterogeneous nature of compost. The fermentation conditions are typical of the composting environment and generate a powerfully degradative environment. The film fully disintegrated within 30 days of treatment. Analysis on the mineral bed extracts showed that: (i) about 40% of the initial polyurethane was still present in the bed extracts; (ii) this residue was strongly degraded in the poly(€-caprolactone) part, while the urethane part was almost completely recovered (from 80 to 95%, according to the measurement method); (iii) 4,4 diamino diphenyl methane (MDA), a very dangerous product of MDI, was released during biodegradation. The results indicate that a mineral bed can be employed to study degradation and metabolites formation in solid phase fermentation and that the MDI-based polyurethanes are not susceptible of a full degradation during composting and maintain the potential of a slow release of MDA into the environment after soil application.     

Understanding global sea levels: past, present and future

The coastal zone has changed profoundly during the 20th century and, as a result, society is becoming increasingly vulnerable to the impact of sea-level rise and variability. This demands improved understanding to facilitate appropriate planning to minimise potential losses. With this in mind, the World Climate Research Programme organised a workshop (held in June 2006) to document current understanding and to identify research and observations required to reduce current uncertainties associated with sea-level rise and variability. While sea levels have varied by over 120 m during glacial/interglacial cycles, there has been little net rise over the past several millennia until the 19th century and early 20th century, when geological and tide-gauge data indicate an increase in the rate of sea-level rise. Recent satellite-altimeter data and tide-gauge data have indicated that sea levels are now rising at over 3 mm year⁻¹. The major contributions to 20th and 21st century sea-level rise are thought to be a result of ocean thermal expansion and the melting of glaciers and ice caps. Ice sheets are thought to have been a minor contributor to 20th century sea-level rise, but are potentially the largest contributor in the longer term. Sea levels are currently rising at the upper limit of the projections of the Third Assessment Report of the Intergovernmental Panel on Climate Change (TAR IPCC), and there is increasing concern of potentially large ice-sheet contributions during the 21st century and beyond, particularly if greenhouse gas emissions continue unabated. A suite of ongoing satellite and in situ observational activities need to be sustained and new activities supported. To the extent that we are able to sustain these observations, research programmes utilising the resulting data should be able to significantly improve our understanding and narrow projections of future sea-level rise and variability.