Indicators of sustainable production: framework and methodology

This paper presents a new tool for promoting business sustainability — indicators of sustainable production. It first introduces the concept of sustainable production as defined by the Lowell Center for Sustainable Production, University of Massachusetts Lowell. Indicators of sustainable production are discussed next, including their dimensions and desirable qualities. Based on the Lowell Center Indicator Framework, the authors suggest a new methodology of core and supplemental indicators for raising companies' awareness and measuring their progress toward sustainable production systems. Twenty-two core indicators are proposed and a detailed guidance for their application is included. An eight-step model provides a context for indicator implementation. The paper concludes with a summary of the strengths and weaknesses of the methodology as well as recommendations for testing the indicators.     

Theory for Penetration in A Pulse-Jet Cleaned Fabric Filter

Presently, there is no effective way to interpret or predict dust penetration through a pulse-jet cleaned fabric filter. This paper presents a model which considers penetration straight through the filter and penetration by seepage. A considerable number of studies have been devoted to penetration by the straight through process; however, a comparison of data from the literature with the present model indicates that seepage and not straight through penetration accounts for virtually all penetrating dust. Although insufficient information is presently available to use the model to predict penetration, the model does show trends that should occur with changes in filter operating variables such as filtration velocity and pulse pressure, and suggests areas in which further research is necessary.     

Dust Deposit Profiles in a High Velocity Pulse-Jet Fabric Filter

Dust deposit profiles in a pilot-scale pulse-jet fabric filter were measured using a beta gauge. Fly ash was collected on polyester needled felt bags, and the dust profiles were measured after the test system was operated to equilibrium at superficial filtration velocities of 50, 75,100,125, and 150 mm/s. The profiles measured show that a large mass of dust is retained on the fabric of a pulse-jet filter when operated at high filtration velocities. This dust mass retention can be caused by two mechanisms: the failure to remove dust from the fabric during a cleaning pulse, and the redeposition of suspended dust onto the fabric after a cleaning pulse. The dust deposit measured at the highest test velocity was found to be much different from the deposits measured at all other velocities. The deposit found at 150 mm/s had almost twice the average areal density and was more evenly distributed than the deposits found at lower velocities.     

Impaction and Particle Bounce at High Stokes Numbers

The information in this paper is directed to those concerned with controlling SO₂ emissions from power plants, and particularly with retrofitting controls onto existing plants. The paper describes an FGD system based on the dolomitic lime process and the scrubber design that have proved successful at the Colstrip plant in eastern Montana. A single scrubber vessel sized to treat all the gas from a 350-MWe coal-fired unit combines the functions of prequenching, absorption, washing, mist elimination, and recycle storage. Downflow Injection of gas along the vessel centerline and regulation of gas flow by the wash tray make the gas velocity uniform and permit scaling up to this large size. A high concentration of dissolved alkalinity in the scrubbing slurry provides rapid absorption and permits low L/G—40 gal/1000 acf—when coal with 2.5% sulfur is burned. Complete oxidation of sulfite makes gypsum of wallboard quality and the process can discharge clarified liquor low in COD if necessary to control chlorides. Since only the single scrubber vessel and the recycle pumps must be located close to the back end of the boiler, the system is particularly well suited for retrofit applications.     

Analyses of the recycling potential of medical plastic wastes

This study analyzed the recycling potential of plastic wastes generated by health care facilities. For this study, we obtained waste streams and recycling data from five typical city hospitals and medical centers and three animal hospitals in Massachusetts. We analyzed the sources, disposal costs and plastic content of medical wastes, and also determined the components, sources, types and amounts of medical plastic wastes. We then evaluated the recycling potential of plastic wastes produced by general city hospital departments, such as cafeterias, operating rooms, laboratories, emergency rooms, ambulance service and facilities, and animal hospitals. Facilities, laboratories, operating rooms, and cafeterias were identified as major sources of plastic wastes generated by hospitals. It was determined that the recycling potential of plastics generated in hospital cafeterias was much greater than that in other departments. This was mainly due to a very slight chance of contamination or infection and simplification of purchasing plastic components. Finally, we discuss methods to increase the recycling of medical plastic wastes. This study suggests that a classification at waste generating sources, depending upon infection chance and/or plastic component, could be a method for the improved recycling of plastic wastes in hospitals.     

Alternatives for treatment and disposal cost reduction of regulated medical wastes

Many hospitals or health care facilities have faced financial difficulties and thus they have attempted to find cost-effective treatment and disposal methods of their regulated medical wastes (RMWs). This study investigated generation volume and sources, composition, and treatment and disposal methods for RMWs obtained from three out of the five typical city hospitals in Massachusetts for which we could obtain relevant data on medical waste. Also, this study compared the generation patterns and amounts of RMWs between the hospital and the medical school. The yearly operational treatment and disposal costs of RMWs based on different treatment and disposal methods were analyzed for one hospital. The most cost-effective option of four different treatment and disposal options studied was to combine on-site incineration and microwave technologies. Finally, this study identified measures for the effective waste characterization methods for the reduction of treatment and disposal costs of RMWs. By careful exclusion of non-RMW from RMW waste streams, hospitals can reduce the RMW volume that requires special treatment and reduce disposal costs.     

The Role of Viscosity in Fabric Filtration

Abstract

An approach for measuring point-source emissions of volatile organic compounds (VOCs), acidic vapors, and other species is presented. The amount emitted is determined by directly measuring the actual weight gain of an adsorbent bed over a period of time, which is a cumulative rather than a grabbed sample. As a result, wide fluctuations of concentration and erratic flow behavior during sampling are accommodated with no apparent effect on the accuracy of the measured emission rate. The emission rate is determined by a mass balance including the mass change of the sorbent, as well as the influent and effluent humidities.

Validation tests used a known mass flow rate of vapor in a carrier gas, which was compared with the amount measured. The vapor was a single VOC, a mixture of VOCs, or a mixture of a VOC with water. Conditions studied were the compound or mixture of compounds, concentration, carrier gas, flow rate, and adsorbent. In some tests the VOC was admitted intermittently. The VOCs included n-hexane, acetone, toluene, vinyl acetate, and 1,1,1 trichloroethane. For 105 tests, the average absolute discrepancy of the delivered and measured emission rates was 6.8% and the standard deviation was 3.4%.