Fecal source tracking by antibiotic resistance analysis on a watershed exhibiting low resistance

The ongoing development of microbial source tracking has made it possible to identify contamination sources with varying accuracy, depending on the method used. The purpose of this study was to test the efficiency of the antibiotic resistance analysis (ARA) method under low resistance by tracking the fecal sources at Turkey Creek, Oklahoma exhibiting this condition. The resistance patterns of 772 water-isolates, tested with nine antibiotics, were analyzed by discriminant analysis (DA) utilizing a five-source library containing 2250 isolates. The library passed various representativeness tests; however, two of the pulled-sample tests suggested insufficient sampling. The resubstitution test of the library individual sources showed significant isolate misclassification with an average rate of correct classification (ARCC) of 58%. These misclassifications were explained by low antibiotic resistance (Wilcoxon test P < 0.0001). Seasonal DA of stream E. coli isolates for the pooled sources human/livestock/deer indicated that in fall, the human source dominated (P < 0.0001) at a rate of 56%, and that human and livestock respective contributions in winter (35 and 39%), spring (43 and 40%), and summer (37 and 35%) were similar. Deer scored lower (17–28%) than human and livestock at every season. The DA was revised using results from a misclassification analysis to provide a perspective of the effect caused by low antibiotic resistance and a more realistic determination of the fecal source rates at Turkey Creek. The revision increased livestock rates by 13–14% (0.04 ≤ P ≤ 0.06), and decreased human and deer by 6–7%. Negative misclassification into livestock was significant (0.04 ≤ P ≤ 0.06). Low antibiotic resistance showed the greatest effect in this category.     

Design and risk assessment tool for vegetative treatment areas receiving agricultural wastewater: Preliminary results

Vegetative treatment areas (VTAs) are commonly being used as an alternative method of agricultural process wastewater treatment. However, it is also apparent that to completely prevent discharge of pollutants to the surrounding environment, settling of particulates and bound constituents from overland flow through VTAs is not sufficient. For effective remediation of dissolved agricultural pollutants, VTAs must infiltrate incoming wastewater. A simple water balance model for predicting VTA soil saturation and surface discharge in landscapes characterized by sloping terrain and a shallow restrictive layer is presented and discussed. The model accounts for the cumulative effect of successive rainfall events and wastewater input on soil moisture status and depth to water table. Nash–Sutcliffe efficiencies ranged from 0.65 to 0.81 for modeled and observed water table elevations after calibration of saturated hydraulic conductivity. Precipitation data from relatively low, average, and high annual rainfall years were used with soil, site, and contributing area data from an example VTA for simulations and comparisons. Model sensitivity to VTA width and contributing area (i.e. barnyard, feedlot, silage bunker, etc.) curve number was also investigated. Results of this analysis indicate that VTAs should be located on steeper slopes with deeper, more-permeable soils, which effectively lowers the shallow water table. In sloping landscapes (>2%), this model provides practitioners an easy-to-use VTA design and/or risk assessment tool that is more hydrological process-based than current methods.     

Evaluation of particulate matter abatement strategies for almond harvest

Almond harvest accounts for substantial PM10 (particulate matter [PM] < or =10 microm in nominal aerodynamic diameter) emissions in California each harvest season. This paper evaluates the effects of using reduced-pass sweepers and lower harvester separation fan speeds (930 rpm) on lowering PM emissions from almond harvesting operations. In-canopy measurements of PM concentrations were collected along with PM concentration measurements at the orchard boundary; these were used in conjunction with on-site meteorological data and inverse dispersion modeling to back-calculate emission rates from the measured concentrations. The harvester discharge plume was measured as a function of visible plume opacity during conditioning operations. Reduced-pass sweeping showed the potential for reducing PM emissions, but results were confounded because of differences in orchard maturity and irrigation methods. Fuel consumption and sweeping time per unit area were reduced when comparing a reduced-pass sweeper to a conventional sweeper. Reducing the separation fan speed from 1080 to 930 rpm led to reductions in PM emissions. In general, foreign matter levels within harvested product were nominally affected by separation fan speed in the south (less mature) orchard; however, in samples conditioned using the lower fan speed from the north (more mature) orchard, these levels were unacceptable.     

Residents' perceptions of water quality improvements following remediation work in the Pymme's Brook catchment, north London, UK

Residents' perceptions of water quality change following remediation work in the upper Pymme's Brook catchment (north London) were elicited by questionnaire and compared with monitored changes in Escherichia coli count and BMWP (The Biological Monitoring Working Party (BMWP)) score. The wider usefulness of consumer perception surveys was then discussed. Monthly data collected between 1990 and 1996 shows that both E. coli count and BMWP score improved following flushing of the foul sewerage system in 1992, but that only E. coli count improved following the subsequent completion of large-scale remedial engineering works. Local residents were surveyed regarding their awareness of the scheme, and the causes of pollution, together with their perceptions as to the effects of the engineering works and of the resulting water quality improvements. Most respondents selected and ranked indicators in a way that suggested they had an awareness of the significance of various indicators of pollution severity. Following completion of the remediation scheme, residents perceived the watercourse to contain less rubbish and sewage fungus, and to have an improved colour and smell, which corresponds favourably to the monitored improvements. However, respondents' perceptions were found to vary when the study population was sub-divided using a range of parameters. For instance, frequent observers of the brook were most likely to correctly identify sewage as the main form of pollution. These divergent perceptions suggest that there may be considerable difficulties when perception surveys are used to quantify 'benefits' following environmental improvement programmes. Nevertheless, the survey was clearly beneficial in enhancing residents' awareness of their environment and the role of their voice in its management.     

The European Commission's sustainable consumption and production and sustainable industrial policy action plan

The promotion of sustainable consumption and production patterns is enshrined as a key objective in the renewed European Union Sustainable Development Strategy (EU SDS). Sustainable consumption and production is arguably the most challenging aspect of the EU SDS. It requires changes to the way products and services are designed, produced, used and disposed of, taking into account producer and consumer behaviours. This paper reviews the European Commission's Communication on the sustainable consumption and production and sustainable industrial policy action plan, introduced on July 16, 2008. The paper examines the priority areas identified for action, the means adopted to improve energy and environmental performance of products as well as uptake by consumers. The paper concludes that the absence of mandatory quantifiable targets and deadlines and a reliance on both cross-sectoral and multi-level relationships are likely to weaken the ability of the action plan's fundamental objective of decoupling economic growth from resource use.     

新西兰无过失伤害的预防、康复和赔偿体制介绍

新西兰意外赔偿局(ACC),是管理新西兰意外事件赔偿的政府机构。ACC计划是对在新西兰境内的公民、居民或临时来访的人提供受伤赔偿的服务。每年在复原、治疗和酬劳补偿等方面要花费十几亿元,为了保证这些服务,ACC从劳动者的薪金、燃油税、政府赞助和投资收入等方面来支付赔偿金,不同行业的工伤赔偿申请比率也不同。另外,ACC建立了培训基金,代替雇主负责对员工的安全与健康培训。虽然这一体制正面临一些私有化和费用不断增加的挑战和困难,但总体来说,ACC体制是适合新西兰的一个优良的方案,比其他国家的体制在管理效率和雇主利益等方面明显显示出优势。     

Sensitivity of two dispersion models (AERMOD and ISCST3) to input parameters for a rural ground-level area source

As of December 2006, the American Meteorological Society/U.S. Environmental Protection Agency (EPA) Regulatory Model with Plume Rise Model Enhancements (AERMOD-PRIME; hereafter AERMOD) replaced the Industrial Source Complex Short Term Version 3 (ISCST3) as the EPA-preferred regulatory model. The change from ISCST3 to AERMOD will affect Prevention of Significant Deterioration (PSD) increment consumption as well as permit compliance in states where regulatory agencies limit property line concentrations using modeling analysis. Because of differences in model formulation and the treatment of terrain features, one cannot predict a priori whether ISCST3 or AERMOD will predict higher or lower pollutant concentrations downwind of a source. The objectives of this paper were to determine the sensitivity of AERMOD to various inputs and compare the highest downwind concentrations from a ground-level area source (GLAS) predicted by AERMOD to those predicted by ISCST3. Concentrations predicted using ISCST3 were sensitive to changes in wind speed, temperature, solar radiation (as it affects stability class), and mixing heights below 160 m. Surface roughness also affected downwind concentrations predicted by ISCST3. AERMOD was sensitive to changes in albedo, surface roughness, wind speed, temperature, and cloud cover. Bowen ratio did not affect the results from AERMOD. These results demonstrate AERMOD's sensitivity to small changes in wind speed and surface roughness. When AERMOD is used to determine property line concentrations, small changes in these variables may affect the distance within which concentration limits are exceeded by several hundred meters.     

Aphid population response to agricultural landscape change: A spatially explicit,individual-based model

A spatially explicit individual-based simulation model has been developed to represent aphid population dynamics in agricultural landscapes. The application of the model to Rhopalosiphum padi (L.) population dynamics is detailed, including an outline of the construction of the model, its parameterisation and validation. Over time, the aphids interact with the landscape and with one another. The landscape is modified by varying a simple pesticide regime, and the multi-scale spatial and temporal implications for a population of aphids is analysed. The results show that a spatial modelling approach that considers the effects on the individual of landscape properties and factors such as wind speed and wind direction provides novel insight into aphid population dynamics both spatially and temporally. This forms the basis for the development of further simulation models that can be used to analyse how changes in landscape structure impact upon important species distributions and population dynamics.     

Ecotoxicity revealed in parasite communities of Sigmodon hispidus in terrestrial environments contaminated with petrochemicals

Several studies have documented contaminant-induced alterations in host-parasite relationships of vertebrate hosts in aquatic environments, suggesting this functional relationship may be useful for monitoring community-level effects of stressors in terrestrial systems. We hypothesized that gastrointestinal helminth communities of hispid cotton rat (Sigmodon hispidus) hosts would be sensitive to exposure to complex mixtures of petrochemicals in soils of tallgrass prairie habitats contaminated with oil refinery wastes. Parasite communities were surveyed (1993-95) on three contaminated and two reference sites on an oil refinery complex in Oklahoma. Abundance of Schizotaenia sigmodontis infections was two-fold higher in hosts from reference than contaminated sites. Strongyloides sigmodontis exhibited pronounced seasonal differences in prevalence and abundance in host populations from reference sites, with much higher seasonal variation compared to hosts from contaminated sites. Other helminth species, including Schizotaenia sigmodontis, Protospirura muris, Longistriata adunca, also exhibited seasonal fluctuations in abundance. Differences in species richness and composition were also observed, with hosts from the reference sites consistently supporting a higher mean number of species compared to those from contaminated sites. Differences in community structure indicate that host-parasite relationships can provide another useful method for monitoring community-level impacts of contamination in a terrestrial system.     

Radiocarbon content of synthetic and natural semi-volatile halogenated organic compounds

Some halogenated organic compounds, such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polybrominated diphenyl ethers (PBDEs), have been suggested to have natural sources but separating these compounds from their commercially synthesized counterparts is difficult. Molecular-level 14C analysis may be beneficial since most synthetic compounds are manufactured from petrochemicals (14C-free) and natural compounds should have "modern" or "contemporary" 14C levels. As a baseline study, we measured, for the first time, the 14C abundance in commercial PCB and PBDE mixtures, a number of organochlorine pesticides, as well as one natural product 2-(3',5'-dibromo-2'-methoxyphenoxy)-3,5-dibromoanisole. The latter compound was isolated from a marine sponge and is similar in structure to a PBDE. All of the synthetic compounds were 14C-free except for the pesticide toxaphene. which had a modern 14C abundance, as did the brominated natural compound. The result for toxaphene was not surprising since it was commercially synthesized by the chlorination of camphene derived from pine trees. These results suggest that measuring the 14C content of halogenated organic compounds may be quite useful in establishing whether organic compounds encountered in the environment have natural or synthetic origins (or both) provided that any synthetic counterparts derive from petrochemical feedstock.