Correspondence analysis of paper recycling society: consumers and paper makers in Japan

Paper passes through many hands. In the present paper, key parts of this cycle in Japan were examined, using questionnaire surveys of households and paper makers. The study aimed to examine the paper makers' strategy for paper production and their attitude to recycling, in comparison with those of the consumers. The study especially focused on toilet paper because consumers have a lot of freedom in purchasing toilet paper. A total of 1242 consumers and 60 paper makers responded. The major findings were as follows. First, we compared the criteria of consumers for purchasing toilet paper with the conjectures of paper makers. Brand, advertisements and the appearance of shopping displays received 60% support from paper makers, but less than 12% of consumers selected these criteria even if we exclude those who do not buy toilet paper or do not have any particular criteria. On the other hand, multiple plies and benefit to the earth were selected by moderate numbers (between 20 and 25%) of consumers, while only 16.77 and 5.69%, respectively of paper makers marked these criteria. Paper makers strongly believe that many retailers sell toilet paper as a loss-leader. By comparing those matters considered important for recycling by consumers with those considered important by makers, it was shown that many makers have a clear awareness of the particular problem, the lack of used paper consumption, in the current paper recycling situation in Japan.     

A probabilistic economic model and sensitivity analysis of fuel-oil production from plastic waste

Journal of Material Cycles and Waste Management - Pyrolysis of plastic waste has been studied for many years, but there are only a few commercial plants in the world. A probabilistic economic model...     

Effects of ozone on growth, yield and leaf gas exchange rates of two Bangladeshi cultivars of wheat (Triticum aestivum L.)

To clarify the effects of O₃ on crop plants cultivated in Bangladesh, two Bangladeshi wheat cultivars (Sufi and Bijoy) were grown in plastic boxes filled with Andisol and exposed daily to charcoal-filtered air or O₃ at 60 and 100 nl l⁻¹ (10:00-17:00) from 13 March to 4 June 2008. The whole-plant dry mass and grain yield per plant of the two cultivars at the final harvest were significantly reduced by the exposure to O₃. Although there was no significant effect of O₃ on stomatal diffusive conductance to H₂O of flag leaf, net photosynthetic rate of the leaf was significantly reduced by the exposure to O_3. The sensitivity of growth, yield, yield components and leaf gas exchange rates to O₃ was not significantly different between the two cultivars. The results obtained in the present study suggest that ambient levels of O₃ may detrimentally affect wheat production in Bangladesh.     

Prediction of physico-chemical properties for PCs/DFs using the UNIFAC model with an alternative approximation for group assignment

The original-type UNIFAC model was used to predict the environmentally important physico-chemical properties of PCDDs/DFs, such as aqueous solubility, Henry's law constant, and 1-octanol/water partition coefficient, through the UNIFAC-derived infinite dilution activity coefficient. In this application, we suggest an alternative approximation that the aromatic ether group AC-O in PCDD/DF molecules is replaced with the aliphatic ether group CH-O, because the AC-O group is not available in the conventional UNIFAC model. With this approximation, the ability of the UNIFAC model to predict those properties was examined by comparing with experimental data. The UNIFAC model provided comparatively good estimation results. From these results, it is shown that the alternative approximation is useful for the UNIFAC estimation of physico-chemical properties for PCDDs/DFs. Furthermore, the predicted solubilities of 2,3,7,8-T4CDD and O8CDD in organic solvents and the co-solvency effect on solubility of PCDDs in methanol/water mixture indicate that the UNIFAC calculation presented here could well predict the physico-chemical properties of PCDDs/DFs in various solution conditions.     

Effects of pH on the water solubility and 1-octanol-water partition coefficient of 2,4,6-tribromophenol

2,4,6-Tribromophenol (TBP) is expected to exist in both ionic and non-ionic forms in the environment due to ionisation of the phenolic group at near neutral pH. In this study, the water solubility (Sw) and 1-octanol-water partition coefficient (Kow) of aqueous solutions of TBP at various pH values were measured using the shake flask method. The ionisation resulted in increasing Sw and decreasing Kow by two to three orders of magnitude. From the experimental results, the environmental partitioning characteristics of TBP and the effect of pH on partitioning were discussed through a comparison with the properties of tetrabromobisphenol A (TBBP-A), which has two phenolic groups. Furthermore, the pH dependence of Sw and Kow was represented using a Henderson-Hasselbalch type model and the validity of the model was evaluated. The model was found to be highly useful for predicting the pH dependence within the range of pH 3 to 9.     

Carbon Molecular Sieving Membranes Derived from Lignin-Based Materials

Carbon molecular sieving membranes were prepared by pyrolysis of lignocresol derived from lignin by the phase-separation method. Lignocresol membranes formed by a dip process on a porous -alumina tubing were carbonized at 400–800°C under nitrogen atmosphere. The thickness of the membrane formed on the outer surface of the substrate was about 400 nm judging from SEM observation. Gas-evolving behavior of lignocresol was measured using thermogravimetry-mass spectrometry (TG-MS). The gaseous products evolved from lignocresol included a number of fragments with higher molecular weights; whereas those from phenolic resin are mainly due to phenol and methylphenol. These evolved pyrolysis fragments effectively contribute to micropore formation of carbonized lignocresol membranes. Gas permeation rates through the membrane decreased in the order of increasing kinetic molecular diameter of the penetrant gas, and the membrane behaved like a molecular sieve. The permeation properties were dependent on heating conditions, and a pyrolysis temperature of 600°C gave the best membrane performance. Gas selectivities of the membrane prepared at 600°C were 50, 8, 290, and 87 for CO₂/N₂, O₂/N₂, H₂/CH₄, and CO₂/CH₄ at 35°C, respectively.     

Toward maximizing the recycling rate in a Sapporo waste plastics liquefaction plant

Sapporo Plastics Recycling Co., Ltd., (SPR) started its commercial operation of waste plastics liquefaction in 2000. At first only hydrocarbon oil was reclaimed, this being derived from the waste plastics liquefaction process under the Japanese Containers and Packaging Recycling Law. Presently, thermal degradation residue and hydrochloric acid are being produced as by-products in addition to the hydrocarbon oil. As a result, the SPR plastics liquefaction plant has achieved a high reclamation rate of 96%, and 93% of the recycled products have been reused in Hokkaido, where SPR is located. The technical problems caused by corrosion and clogging have been solved. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Physicochemical properties of selected polybrominated diphenyl ethers and extension of the UNIFAC model to brominated aromatic compounds

The aqueous solubilities (S(w)) at various temperatures from 283 K to 308 K and 1-octanol/water partition coefficients (K(ow)) for four polybrominated diphenyl ethers (PBDEs: 4,4'-dibromodiphenyl ether (BDE-15), 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), 2,2',4,4',5-pentabromodiphenyl ether (BDE-99), and 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE-153)) were measured by the generator column method. The S(w) and K(ow) data revealed the effect of bromine substitution and basic structure on S(w) and K(ow). To estimate the infinite dilution activity coefficients (gamma(i)(w,infinity)) of the PBDEs in water from the S(w) data, enthalpies of fusion and melting points for those compounds were measured with a differential scanning calorimeter. Henry's Law constants (H(w)) of the PBDEs were derived from the determined gamma(i)(w,infinity) and literature vapor pressure data. Some physicochemical characteristics of PBDEs were also suggested by comparing the present property data with that of polychlorinated dibenzo-p-dioxins, brominated phenols and brominated benzenes in past studies. Furthermore, in order to represent different phase equilibria including solubility and partition equilibrium for other brominated aromatic compounds using the UNIFAC model, a pair of UNIFAC group interaction parameters between the bromine and water group were determined from the S(w) and K(ow) data of PBDEs and brominated benzenes. The ability of the determined parameters to represent both properties of brominated aromatics was evaluated.     

锥形件柔性旋压成形时的变形力分析

采取剪切和轧压综合变形的计算方法 ,建立了锥形件柔性旋压力的理论计算公式 ,并对内旋轮施加于毛坯上的夹紧力G、旋轮进给比f等成形工艺参数对旋压力的影响进行了理论分析和试验研究     

Effects of ozone on growth, yield and leaf gas exchange rates of four Bangladeshi cultivars of rice (Oryza sativa L.)

To assess the effects of tropospheric O₃ on rice cultivated in Bangladesh, four Bangladeshi cultivars (BR11, BR14, BR28 and BR29) of rice (Oryza sativa L.) were exposed daily to charcoal-filtered air or O₃ at 60 and 100 nl l⁻¹ (10:00-17:00) from 1 July to 28 November 2008. The whole-plant dry mass and grain yield per plant of the four cultivars were significantly reduced by the exposure to O₃. The exposure to O₃ significantly reduced net photosynthetic rate of the 12th and flag leaves of the four cultivars. The sensitivity to O₃ of growth, yield and leaf gas exchange rates was not significantly different among the four cultivars. The present study suggests that the sensitivity to O₃ of yield of the four Bangladeshi rice cultivars is greater than that of American rice cultivars and is similar to that of Japanese rice cultivars and that O₃ may detrimentally affect rice production in Bangladesh.