Congener-specific analysis of non-dioxin-like polychlorinated biphenyls in blood collected from 127 elderly residents in Nakagawa Town, Fukuoka Prefecture, Japan

We conducted congener-specific analysis of non-dioxin-like polychlorinated biphenyls (non-dioxin-like PCBs) in blood collected in February 2004 from 127 elderly residents living in Nakagawa Town, Fukuoka Prefecture, Japan. The present study is one of the few studies in which 56 non-dioxin-like PCBs congeners were measured in human blood. Of the 127 elderly residents, 51 were men (mean: 68.1 years) and 76 were women (mean: 68.1 years). Among 197 non-dioxin-like PCB congeners, 56 were identified in the blood of elderly residents. The arithmetic mean total concentrations of 56 non-dioxin-like PCBs congeners in the blood of elderly men and women in Nakagawa Town were 419 (median: 378) and 363 (median: 323)ngg(-1)lipid, respectively, and the concentrations were in the range of 172-1102 and 119-1226ngg(-1)lipid, respectively, indicating that the total concentrations in elderly men are significantly higher than those in elderly women. The contamination of non-dioxin-like PCBs in the blood of elderly men and women in Fukuoka Prefecture was found to have decreased compared to past levels. The ratios of hexachlorinated biphenyls (hexaCBs) to the total concentrations of 56 non-dioxin-like PCBs congeners in the blood of elderly men and women were 44.6% and 45.6%, respectively, which was particularly high compared with those of other congeners. 2,2',4,4',5,5'-HexaCB (#153) among hexaCBs congeners, the most abundant congener in the blood of elderly men and women, contributed approximately 23.0% and 23.5% to the total concentrations of 56 non-dioxin-like PCBs congeners, respectively. Furthermore, 2,2',3,4,4',5'-hexaCB (#138), 2,3,3',4',5,6-hexaCB (#163)/2,3,3',4',5',6-hexaCB (#164), 2,2',3,4,4',5,5'-heptaCB (#180), and 2,2',3,4,4',5,6'-heptaCB (#182)/2,2',3,4',5,5',6-heptaCB (#187) also showed high ratios to the total concentrations of 56 non-dioxin-like PCBs congeners detected in the blood of elderly men and women. A statistical examination of the relationship between the total concentrations of 56 non-dioxin-like PCBs congeners in blood and the age of elderly residents who were over 60 years indicated statistically significant correlations between the total concentrations of these PCBs congeners and the age of elderly women. However, similar correlations were not observed in elderly men. The results of the present study have indicated the current levels of non-dioxin-like PCBs in the blood of elderly men and women in Fukuoka Prefecture, Japan and can be used as baseline data for those over age 60.     

Detection of dicofol and related pesticides in human breast milk from China, Korea and Japan

Previously, we demonstrated that the concentrations of DDTs were greater in breast milk collected from Chinese mothers than from Japanese and Korean mothers. To investigate dicofol as a possible source of the DDTs in human breast milk, we collected breast milk samples from 2007 to 2009 in China (Beijing), Korea (Seoul, Busan) and Japan (Sendai, Takarazuka and Takayama). Using these breast milk samples, we quantified the concentrations of dichlorobenzophenone, a pyrolysis product of dicofol (simply referred to as dicofol hereafter), dichlorodiphenyltrichloroethane and its metabolites (DDTs) using GC-MS. Overall, 12 of 14 pooled breast milk samples from 210 mothers contained detectable levels of dicofol (>0.1 ng g⁻¹ lipid). The geometric mean concentration of dicofol in the Japanese breast milk samples was 0.3 ng g⁻¹ lipid and significantly lower than that in Chinese (9.6 ng g⁻¹ lipid) or Korean breast milk samples (1.9 ng g⁻¹ lipid) (p < 0.05 for each). Furthermore, the ΣDDT levels in breast milk from China were 10-fold higher than those from Korea and Japan. The present results strongly suggest the presence of extensive emission sources of both dicofol and DDTs in China. However, exposure to dicofol cannot explain the large exposure of Chinese mothers to DDTs because of the trace levels of dicofol in the ΣDDTs. In the present study, dicofol was confirmed to be detectable in human breast milk. This is the first report to identify dicofol in human samples.     

Isoprene emission from tropical trees in Okinawa Island, Japan

This study surveyed isoprene emission from 42 indigenous and exotic tropical trees in subtropic Okinawa, Japan. Of the 42 trees studied, 4 emitted isoprene at a rate in excess of 20 μg g⁻¹ h⁻¹, and 28 showed the rates of 1–10 μg g⁻¹ h⁻¹. The remainder emitted less than 1 μg g⁻¹ h⁻¹. The majority of trees in this study may therefore fall within the lower emitting species. However, species in Moraceae that is indigenous in Okinawa emitted isoprene at relatively higher rates with an average of 14.2 μg g⁻¹ h⁻¹. The highest emission rate of 107.1 μg g⁻¹ h⁻¹ for Ficus virgata yielded the area basis rate of 47.4 nmol m⁻² s⁻¹, which is almost equivalent to the rate of high emitting species. Furthermore, a linear relationship between light intensity and isoprene emission was noted with Ficus virgata up to 1700 μmol m⁻² s⁻¹. These findings may show the potential importance of subtropical areas as sources of isoprene to the atmosphere.     

Iron oxide-loaded slag for arsenic removal from aqueous system

An effective adsorbent for arsenic removal from aqueous system was synthesized by loading iron(III) oxide on municipal solid waste incinerator melted slag. The loading was accomplished via chemical processes and thermal coating technique. The key point of the technique was the simultaneous generation of amorphous FeOOH sol and silica sol in-situ and eventually led to the formation of Fe-Si surface complexes which combined the iron oxide with the melted slag tightly. The surface morphology of the iron oxide-loaded slag was examined and the loading mechanisms were discussed in detail. The adsorbent was effective for both arsenate and arsenite removal and its removal capabilities for As(V) and As(III) were 2.5 and 3 times of those of FeOOH, respectively. Both affinity adsorption and chemical reactions contributed to arsenic removal. The effects of solution pH, contact time, arsenic concentration and adsorbent dosage on arsenic removal were examined and the optimum removal conditions were established. Furthermore, leaching of hazardous elements such as Cr(VI), As, Se, Cd and Pb from the adsorbent at a pH range of 2.5-12.5 was below the regulation values. Accordingly, it is believed that the iron oxide-loaded slag developed in this study is environmentally acceptable and industrially applicable for wastewater treatment.     

Removal of organic polyelectrolytes and their metal complexes by adsorption onto xonotlite

Natural organic polyelectrolytes (humic and fulvic acids) and their metal complexes were removed by adsorption onto xonotlite. The removal percentages of humic and fulvic acids by xonotlite were approximately 80% and 30%, respectively. Humic acid removal from solution by adsorption onto xonotlite took place more readily than fulvic acid removal. The molecular weight distributions of the humic substances remaining in solution after adsorption with the xonotlite were measured with size exclusion chromatography. A comparison of molecular weight distributions demonstrated conclusively that large molecular weight components were adsorbed preferentially, indicating that adsorption efficiency depends on the number of functional groups of humic substances. Furthermore, the surface topography of the adsorbent was observed before and after adsorption by scanning electron microscopy. The calculated heat of adsorption was of 330 kJ mol(-1) which was evaluated from the Clapeyron-Clausius equation. Therefore, the adsorption type can be considered chemical. Since xonotlite can be easily synthesized and obtained at low cost, the adsorption method of humic and fulvic acids is superior to their precipitation.     

Waste plastics recycling by an entrained-flow gasifier

We studied an entrained-flow gasification process which efficiently converts waste plastics to energy at a high energy recovery rate. Waste plastics, after being shredded to <8 mm or <14 mm, were fed into an entrained-flow gasifier with air and oxygen. In the gasifier, organic substances were pyrolyzed, partially combusted, and then converted into synthetic gas (CO, H₂) at a high temperature (over 1600 K). The clarified gasification characteristics were that the lower heat value (LHV) of the product gas was over 4.2 MJ/Nm³ and the cold gas efficiency was approximately 60%. Other inert substances in the wastes such as ashes and metals were melted into slag and condensed on bag filters. The bag filters and a water scrubber removed impurities such as dusts, heavy metals, and hydrogen halides from the product gases. Solid hydrocarbons, which include char and soot, were removed at a hot cyclone and on the bag filters. Received: July 19, 2000 / Accepted: October 3, 2000     

Electrodeposition of rare-earth elements from neodymium magnets using molten salt electrolysis

Rare-earth element is an important target for recycling in Japan. In our previous work, we demonstrated the selective leaching of rare-earth elements from waste neodymium magnets using chloride molten salt electrolysis. In this study, we investigated the electrodeposition of rare-earth elements using liquid metal as a cathode. The reduction potential obtained using a liquid-zinc electrode was higher than that obtained using a solid molybdenum electrode. A zinc–rare-earth alloy was formed as the electrodeposit. The total rare-earth element content of the electrodeposit was more than 99.8 mass% without zinc and other composition of electrolysis. The activity of rare-earth elements decreased upon alloy formation, suggesting that the oxidation rate of electrodeposited alloy will be decreased.     

Characterization of Photovoltaic Performance of the Dye-Sensitized Solar Cell with a Novel Ruthenium Complex Having a Bisdemethoxycurcumin as a Ligand

The first example of a ruthenium sensitizer (TUS-22) having a natural dye, bisdemethoxycurcumin, as a ligand has been synthesized. The dye-sensitized solar cell based on this novel dye showed 5.8% conversion efficiency under AM 1.5 (100 mW/cm²) irradiation.