Solventless Delignification of Wood Flour with TiO2/poly(ethylene oxide) Photocatalyst System

A novel solventless delignification of a defatted Picea glehnii wood flour sample was performed using a TiO₂/polyethylene oxide (PEO) photocatalyst system. A cell wall structure of the wood flour was directly observed, showing that its lignin fraction was removed by the photodegradation. The total lignin amount was slightly decreased as compared with that of the pristine sample, and the vanillin formation was confirmed by the ¹H-NMR measurement. The TiO₂ worked as a radical initiator, and simultaneously acid and aldehyde compounds produced by the PEO photolysis did as an accelerator for the solventless delignification. Although the photocatalyst system showed high delignification activity even for a low molecular lignin model, the delignification of the wood flour sample was confined to the surface. It was found that the suppressed delignification behavior was due to crosslinked structure of lignin.     

Phytotoxicities of fluoranthene and phenanthrene deposited on needle surfaces of the evergreen conifer, Japanese red pine (Pinus densiflora Sieb. et Zucc.)

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied with respect to their carcinogenic and mutagenic effects on animals and human cells. Phenanthrene (PHE) and fluoranthene (FLU) effects on the needle photosynthetic traits of 2-year-old Japanese red pine (Pinus densiflora Sieb. et. Zucc.) seedlings were investigated. Three months after fumigation of foliage with solutions containing these PAHs (10 microM each), FLU had negative effects on net photosynthesis at near-saturating irradiance, stomatal conductance, initial chlorophyll fluorescence, and the contents of total chlorophyll, magnesium, and ribulose 1,5-bisphosphate carboxylase (rubisco) of current-year needles. PHE had similar negative effects to FLU but in lesser magnitude. The effects of the PAHs were mitigated by the addition of an OH-radical scavenger (mannitol) into the PAH solutions. PAHs deposited on the surface of pine needles may induce the generation of reactive oxygen species in the photosynthetic apparatus, a manner closely resembling the action of the herbicide paraquat.     

Preparation and Characterization of Cellulose/Polypropylene Composite Using an Oxidatively Degraded Polypropylene

In this work, an oxidatively degraded polypropylene (DgPP) was studied as a novel coupling agent for fibrous cellulose (FC)/polypropylene (PP) composite. An optimal preparation time of PP thermal oxidative degradation was 18 h at 130 °C, and the DgPP had functional groups such as γ-lactone and acid groups. The spherulite observation of the DgPP suggested miscibility for the undegraded PP. The addition of the DgPP presented the transparency improvement of FC/PP composite, and this behavior was found to be originated from the grafted DgPP, which was produced by the esterification reaction between the of FC and the DgPP. The scanning electron microscope (SEM) observation showed that the grafted DgPP coated the FC surface, and the tensile strength of the FC/PP composite increased by an appropriate amount of the DgPP addition. These results suggested that the DgPP was suitable for the coupling agent of FC/PP composite.     

Photocatalytic removal of fenitrothion in pure and natural waters by photo-Fenton reaction

The photocatalytic removal kinetics of fenitrothion at a concentration of 0.5mgl(-1) in pure and natural waters were investigated in Fe(III)/H2O2/UV-Vis, Fe(III)/UV-Vis and H2O2/UV-Vis oxidation systems, with respect to decreases in fenitrothion concentrations with irradiation time using a solar simulator. Fenitrothion concentrations were determined by HPLC analysis. Furthermore, total mineralization of fenitrothion in these systems was evaluated by monitoring the decreases in DOC concentrations with solar simulator irradiation time by TOC analysis. It was shown that the degradation rate of fenitrothion was much faster in the Fe(III)/H2O2/UV-Vis system than the Fe(III)/UV-Vis and H2O2/UV-Vis systems in both pure and river waters. Consequently, the mineralization rate of fenitrothion was much faster in the Fe(III)/H2O2/UV-Vis system than in the other two systems. The high *OH generation rate measured in the Fe(III)/H2O2/UV-Vis system was the key to faster degradation of fenitrothion. Increases in the concentrations of H2O2 and Fe led to better final degradation of fenitrothion. These results suggest that the photo-Fenton reaction (Fe(III)/H2O2/UV-Vis) system is likely to be an effective method for removing fenitrothion from contaminated natural waters.     

Time-series product and substance flow analyses of end-of-life electrical and electronic equipment in China

Given the amounts of end-of-life electrical and electronic equipment (EoL-EEE) being generated and their contents of both harmful and valuable materials, the EoL-EEE issue should be regarded not only as an emerging environmental problem but also as a resource management strategy in China. At present, in order to provide the basis for managing EoL-EEE at both product and substance levels in China, it is necessary to carry out a quantitative analysis on EoL-EEE and to determine how much of it will be generated and how much materials and substances it contains. In this study, the possession and obsolescence amounts of five types of household appliance (HA) including television (TV) sets and the amounts of substances contained in EoL TV sets were estimated using time-series product flow analysis (PFA) and substance flow analysis (SFA). The results of PFA indicated that the total possession amounts of those five types of HAs will exceed 3.1 billion units in 2030, which will be two times higher than those in 2010. In addition, it was estimated that cumulatively over 4.8–5.1 billion units of these five types of EoL HA would be obsoleted between 2010–2030. The results of SFA on TV sets indicated that the generated amounts of most of the less common metals and a part of common metals such as copper (Cu) would tend to decrease, whereas those of other common metals such as iron (Fe) as well as precious metals would tend to increase in EoL TV sets in 2015–2030. The results of this study provide a quantitative basis for helping decision makers develop strategic policies for the management of EoL-EEE considering both environmental and resource aspects. Moreover, a calculation scheme of obsolete HAs presented in this study can be applied to estimate other types of EoL durable good. Meanwhile, the frameworks of this study will help not only the policy decision makers in the Chinese government but also those in developing countries that are facing similar problems.     

Measurement of ethylene emission from Japanese red pine (Pinus densiflora) under field conditions in NOx-polluted areas

Emission of ethylene from the needles of Japanese red pine, Pinus densiflora, was measured in air-polluted areas in Hiroshima, Japan. We applied a suitable protocol to determine the rate of ethylene emission from the excised needles. The influence of excision of needles on ethylene emission was not detected during the first 4 h of incubation at 20 degrees C. Ethylene emissions were low in the unpolluted (clean) areas regardless of the altitude or season. The emission of stress ethylene increased with the atmospheric NO2 concentration, suggesting that atmospheric NOx or related substances induced the higher ethylene emission in the polluted areas (near urban and industrial areas). In all cases, 1-year-old needles emitted significantly larger amounts of ethylene than the current needles. Ethylene emission did not increase evenly in the polluted areas, but the frequency of trees emitting high ethylene increased. Therefore, threshold rates for the baseline ethylene emission were proposed.     

Resource-availability scenario analysis for formal and informal recycling of end-of-life electrical and electronic equipment in China

In strategic end-of-life electrical and electronic equipment (EoL EEE) management, it has become important to not only avoid the negative environmental impacts but also enhance the positive effects of secondary resource utilization. This is especially true in emerging countries such as China, where medium- to long-term increases in the amount of EoL EEE generation are projected. This study aims to assess the resource availability potential for EoL EEE recycling based on penetration scenarios for formal and/or informal treatment options in China. We categorized substances contained in EoL television sets and personal computers into environmental, resource, and economic aspects under consideration of product transitions. Barium and copper have a high negative potential impact on human health and/or the ecosystem. Focusing on metals with a high resource potential, the resource availability is assessed under different treatment options using characterization factors identified through a life-cycle impact assessment method, the ReCiPe 2008. The results suggest that copper and lead recycling could alleviate the increase in mining costs of resource utilization. Scenario analysis for penetration of formal and informal recycling options indicated that the difference in the alleviated mining costs between the status quo and short-term transition projections until 2030 corresponds to 2.1–2.4 billion dollars.     

Applying choice experiments to valuing the different types of environmental issues in Japan

In this study, improvements of different types of environmental issues in Japan, (i) reduction of mortality risk due to exposure to suspended particulate matter (SPM), (ii) improvement of the water quality of an urban river, and (iii) protection of goshawks, were evaluated in monetary terms using choice experiments. It was found that the reduction of mortality risk and the improvement of the water quality were highly valued, while residents did not place high value on the protection of goshawks. However, scope sensitivity was not observed in the evaluation of each issue and the presence of moral satisfaction was revealed. Excluding the effect of lexicographic choices could partly solve the problem concerning scope sensitivity. The results suggested that non-scope sensitive values that were unrelated to or inconsistent with the level of environmental improvement could be estimated through choice experiments in this research.     

Shift in apparent contrast of disc at Secchi disc depth in coastal sea areas

The relationship between Secchi disc depth and amount of suspended material in seawater varies depending on the particular marine area. To identify the cause of this dependence, we calculated the apparent contrast (C _SD) at each Secchi disc depth in different coastal sea areas. When the turbidity from the surface to the Secchi disc depth was uniform, the C _SD was distributed in the range of 1.3 to 0.001 for a Secchi disc depth (Z _SD) of 2–18 m. Z _SD tended to decrease as C _SD became larger. The dominant wavelength for the sea color was 475–500 nm for a Secchi disc depth of 13–18 m, and 500–575 nm for a Z_SD of 2–6 m, shifting to longer wavelengths as the Secchi disc depth increased. That is, when Z _SD decreased, the dominant wavelength of the sea color, and the C _SD increased simultaneously. This phenomenon seems to occur because the contrast threshold for the human eye is higher at longer wavelengths. In other words, the contrast threshold is visibly indistinguishable when the apparent contrast in ocean waters with low Secchi disc depths is high. This phenomenon occurs because the human eye is affected by the color of the sea.