Effects of Filler Content and Compatibilizing Agents on Mechanical Behavior of the Particle-Reinforced Composites

The study was carried out to investigate the effects of filler content and two different compatibilizing agents (Eastman G-3003 and G-3216) on the mechanical properties of polypropylene reinforced with corn stalk and wood flour. In the sample preparation, three levels of filler loading (30, 40 and 50 wt%) and one level of compatibilizing agent content (2.5 wt%) were used. For overall trend, with addition of both grades of the compatibilizing agents, tensile and flexural properties of the composites significantly improved, as compared with the pure PP. Tensile and flexural properties reach a maximum at 40 wt% filler content and gradually decrease with a further increase in wood particle content. The composites treated with G-3003 gave better results in comparison with G-3216. This could be caused by the high melt viscosity of G-3003. In general, corn stalk flour filled composites showed superior mechanical properties.     

Health,safety and environmental unit performance assessment model under uncertainty (case study: steel industry)

Performance assessment is a critical objective of management systems. As a result of the non-deterministic and qualitative nature of performance indicators, assessments are likely to be influenced by evaluators’ personal judgments. Furthermore, in developing countries, performance assessments by the Health, Safety and Environment (HSE) department are based solely on the number of accidents. A questionnaire is used to conduct the study in one of the largest steel production companies in Iran. With respect to health, safety, and environment, the results revealed that control of disease, fire hazards, and air pollution are of paramount importance, with coefficients of 0.057, 0.062, and 0.054, respectively. Furthermore, health and environment indicators were found to be the most common causes of poor performance. Finally, it was shown that HSE management systems can affect the majority of performance safety indicators in the short run, whereas health and environment indicators require longer periods of time. The objective of this study is to present an HSE-MS unit performance assessment model in steel industries. Moreover, we seek to answer the following question: what are the factors that affect HSE unit system in the steel industry? Also, for each factor, the extent of impact on the performance of the HSE management system in the organization is determined.     

Green Synthesis and Characterization of Silver Nanoparticles Using Elaeagnus angustifolia Bark Extract and Study of Its Antibacterial Effect

Journal of Polymers and the Environment - Nowadays, many chemical methods have been proposed for the synthesis of silver nanoparticles, but green synthesis has received more attention due to its...     

Aryl hydrocarbon receptor gene transitions (c.-742C>T; c.1661G>A) and idiopathic male infertility: a case-control study with in silico and meta-analysis

Environmental Science and Pollution Research - Aryl hydrocarbon receptor (AHR) is responsible for crucial events in male reproductive biology. Here, the association of the AHR transitions...     

The <Emphasis Type="Italic">AhRR</Emphasis>-c.565C&gt;G transversion may increase total antioxidant capacity levels of the seminal plasma in infertile men

The Aryl hydrocarbon receptor (AhR)-repressor (AhRR) is a regulator of the AhR pathway, which plays an important role in xenobiotic and reactive oxygen species (ROS) metabolism. Total antioxidant capacity (TAC) is a major factor in semen quality that protects sperm against ROS stress. Malondialdehyde (MDA) is the indicator of lipid peroxidation damage that is occurred due to ROSs. In this study, we determined and compared the MDA and TAC levels of infertile men’s semen and blood plasma regarding genotype groups of AhRR-c.565C>G transversion. Semen and blood samples of 123 infertile males were collected from the Fatemeh Zahra IVF Centre, Babol, Iran. TAC and MDA levels of seminal and blood plasma were measured by TBARS and FRAP methods, respectively. Cases were genotyped by the PCR-RFLP method. The frequency of c.565C>G genotypes was determined as CC (34.14%), CG (55.28%) and GG (10.58%). Mean levels of TAC μm/L and MDA nmol/mL in semen plasma of CC, CG and GG groups were (1365.7, 1.28), (1542.8, 1.51) and (1860.2, 0.82), respectively. Also, mean levels of TAC μm/L and MDA nmol/mL in blood plasma samples in CC, CG and GG genotypes were (806.14, 1.168), (727.1, 1.006) and (635.7, 0.83), respectively. Comparison of marker levels between genotypes revealed that the TAC level of semen plasma in the GG genotype was significantly higher than its level in the CC group (p < 0.05). Our findings showed that in seminal plasma of infertile men with the GG genotype of AhRR-c.565C>G transversion, the level of total antioxidant capacity is significantly higher in comparison with the CC genotype. Then, the G allele of AhRR-c.565C>G transversion may have a role in the increase in antioxidant capacity of seminal plasma.     

Ergonomic design and evaluation of a diagnostic ultrasound transducer holder

Background. Work-related musculoskeletal disorders (WMSDs) are injuries and disorders that affect the body’s movement and musculoskeletal system. Awkward postures represent one of the major ergonomic risk factors that cause WMSDs among sonographers while working with an ultrasound transducer. This study aimed to design and evaluate a new holder for the ultrasound transducer. Materials and methods. In the first phase a new holder was designed for the transducer, considering design principles. Evaluation of the new holder was then carried out by electrogoniometry and a locally perceived discomfort (LPD) scale. Results. The application of design principles to the new holder resulted in an improvement of wrist posture and comfort. Wrist angles in extension, flexion, radial deviation and ulnar deviation were lower with utilization of the new holder. The severity of discomfort based on the LPD method in the two modes of work with and without the new holder was reported with values of 1.3 and 1.8, respectively (p?<?0.05). Conclusion. Overall, this study indicated that applying ergonomics design principles was effective in minimizing wrist deviation and increasing comfort while working with the new holder.     

Cigarette butt littering consequences: a study of pollution rate on beaches and urban environments

Cigarette butts are hazardous wastes that are not properly discarded by most smokers. They are one of the most abundant litters in the environment and a threat to various organisms because they leak numerous pollutants. This study aimed to assess the distribution of cigarette butts in a coastal city south of the Caspian Sea in Mazandaran Province, Iran. Observations were performed using the visual survey technique based on standardized protocol. The results showed 11,261 littered cigarette butts in 15 studied urban areas ( an average of 0.306 units per square meter). Also, the average density of littered cigarette butts on the studied beaches was 0.106 per square meter. The littered cigarette butts had significant spatial variation, and the number of counts was 135 to 2090. The land-use has a significant effect on the density of littered cigarette butts due to its population density. The inquiry’s index demonstrated that 33.3% of the studied urban areas are high pollution and severe pollution, while all beaches are high and severe. Therefore, a significant focus must be considered to reduce cigarette butts littering due to the collection problems and challenges of cigarette butt management. Because the pollution on the beaches is higher than in urban areas, improving waste management services and establishing a regular cleaning program are essential.

     

Development of a model to assess environmental performance, concerning HSE-MS principles

The main objective of the present study was to develop a valid and appropriate model to evaluate companies’ efficiency and environmental performance, concerning health, safety, and environmental management system principles. The proposed model overcomes the shortcomings of the previous models developed in this area. This model has been designed on the basis of a mathematical method known as Data Envelopment Analysis (DEA). In order to differentiate high-performing companies from weak ones, one of DEA nonradial models named as enhanced Russell graph efficiency measure has been applied. Since some of the environmental performance indicators cannot be controlled by companies’ managers, it was necessary to develop the model in a way that it could be applied when discretionary and/or nondiscretionary factors were involved. The model, then, has been modified on a real case that comprised 12 oil and gas general contractors. The results showed the relative efficiency, inefficiency sources, and the rank of contractors.     

Comparison of API650-2008 provisions with FEM analyses for seismic assessment of existing steel oil storage tanks

API650-2008 is one of the prominent codes consisting of seismic specifications to design steel storage tanks for earthquakes resistance. In spite of the code's broad application, there are some failure modes such as slide bottom, elephant-foot buckling, sloshing and uplift needing more evaluation. In this paper, 161 existing tanks in an oil refinery complex have been classified into 24 groups and investigated using both API650-2008 rules and numerical FEM models. Failure modes and dynamic characteristics of studied models have been calculated by numerical FEM analysis and compared with code requirements. The results demonstrate that, in some cases, there are some imperfections in the code requirements that require further investigation.