Separation of selected PAHs by using high performance capillary electrophoresis with modifiers

The effect of varying SDS concentration in a micellar electrokinetic capillary chromatographic system (MECC) is investigated. In addition, the introduction of -cyclodextrin as modifier to the electrophoretic medium, containing SDS and a phosphate-borate buffer, is shown to give satisfactory separation of the seven selected PAHs. The separation efficiency is increased with the addition of -cyclodextrin.     

Toward a robust analytical method for separating trace levels of nano-materials in natural waters: cloud point extraction of nano-copper(II) oxide

Cloud point extraction (CPE) factors, namely Triton X-114 (TX-114) concentration, pH, ionic strength, incubation time, and temperature, were optimized for the separation of nano-sized copper(II) oxide (nCuO) in aqueous matrices. The kinetics of phase transfer was studied using UV–visible spectroscopy. From the highest separation rate, the most favorable conditions were observed with 0.2 %?w/v of TX-114, pH?=?9.0, ionic strength of 10 mM NaCl, and incubation at 40 °C for 60 min, yielding an extraction efficiency of 89.2?±?3.9 % and a preconcentration factor of 86. The aggregate size distribution confirmed the formation of very large nCuO–micelle assemblies (11.9 μm) under these conditions. The surface charge of nCuO was also diminished effectively. An extraction efficiency of 91 % was achieved with a mixture of TX-100 and TX-114 containing 30 wt.% of TX-100. Natural organic and particulate matters, represented by humic acid (30 mg/L) and micron-sized silica particles (50 mg/L), respectively, did not significantly reduce the CPE efficiency (<10 %). The recovery of copper(II) ions (20 mg/L) in the presence of humic acid was low (3–10 %). The spiked natural water samples were analyzed either directly or after CPE by inductively coupled plasma mass spectrometry following acid digestion/microwave irradiation. The results indicated the influence of matrix effects and their reduction by CPE. A delay between spiking nCuO and CPE may also influence the recovery of nCuO due to aggregation and dissolution. A detection limit of 0.04 μg Cu/L was achieved for nCuO.     

Remediation of petroleum-contaminated soils by fluidized thermal desorption

A novel type of fluidized bed desorber was developed for the remediation of petroleum-contaminated soils at low temperature with high efficiency. Cahn balance® was utilized to investigate the thermal desorption behavior of soils contaminated by various hydrocarbons. The performance of the fluidized-bed desorber was investigated at different operating modes. Batch operation of the fluidized-bed desorber exhibited 99.9% desorption efficiency at temperatures of ca. 300°C within a half hour. Continuous operation of the fluidized-bed indicated that Q/F (the ratio of the mass flow rate of fluidizing gas to feeding rate of contaminated soils) is less important at higher temperature (>300°C), if proper fluidization is ensured. The periodic operation of the fluidized bed desorber shows the possibility to reduce off-gas volume significantly.     

Radium isotopes in the Ulsan Bay

In order to estimate the fluxes of Ra isotopes, we measured 224Ra, 226Ra, and 228Ra activities in the Ulsan Bay mixing zone. The convex upwards curvature of the plot of Ra isotope activities versus salinity for the mixing zone suggests that Ra isotopes are supplied from particles entering the mixing zone from both the river and bottom sediments. This addition increases the estuarine flux of 226Ra and 228Ra to the outer sea by factors of 15 and 95 over the flux attributable to Ra dissolved in the riverine water alone. In order to estimate the residence time of the water in Ulsan Bay, we applied a mass balance model to the distribution of 224Ra and 226Ra activities in the Ulsan Bay mixing zone with the inflow from the Taehwa River. The obtained residence times of the waters in the Ulsan Bay were estimated to be 6.8-11.4 d. The waters in the upper part of the estuary have long residence times whereas those in the lower part, in contact with the open sea, have shorter residence times. The mean residence time of the water in the Ulsan Bay was estimated to be 9.1 d.     

Factors affecting EDTA extraction of lead from lead-contaminated soils

The effects of solution:soil ratio, major cations present in soils, and the ethylenediaminetetraacetic acid (EDTA):lead stoichiometric ratio on the extraction of lead using EDTA were studied for three different Superfund site soils, one rifle range soil, and one artificially lead-contaminated soil. Extraction of lead from the lead-contaminated soils was not affected by a solution:soil ratio as low as 3:1 but instead was dependent on the quantity of EDTA present. Results of the experiments showed that the extraction efficiencies were different for each soil. If sufficiently large amount of EDTA was applied (EDTA-Pb stoichiometric ratio greater than 10), most of the lead were extracted for all soils tested except for a Superfund site soil from a lead mining area. The differences in extraction efficiencies may be due to the major cations present in soils which may compete with lead for active sites on EDTA. For example, iron ions most probably competed strongly with lead for EDTA ligand sites for pH less than 6. In addition, copper and zinc may potentially compete with lead for EDTA ligand sites. Experimental results showed that addition of EDTA to the soil resulted in a very large increase in metals solubility. The total molar concentrations of major cations extracted were as much as 20 times the added molar concentration of EDTA. For some of the soils tested, lead may have been occluded in the iron oxides present in the soil which may affect lead extraction. While major cations present in the soil may be one of the factors affecting lead extraction efficiency, the type of lead species present also play a role.     

Postural Loading Assessment in Assembly Workers of an Iranian Telecommunication Manufacturing Company

Background. Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Methods. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Results. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Conclusion. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.     

Direct coupling of supercritical fluid extraction-supercritical fluid chromatography for the determination of selected polycyclic aromatic hydrocarbons in aqueous environmental samples

A rapid and simple method is described for the quantitative determination of polycyclic aromatic hydrocarbons in aqueous environmental samples. A microscale on-line supercritical fluid extraction-supercritical fluid chromatography system using carbon dioxide is employed. The extract is analysed using capillary supercritical fluid chromatography with UV detection. Detection was carried out at 254 nm. An extraction efficiency of as high as 91% was obtained for the PAHs.     

Persistent organic pollutants in mangrove food webs in Singapore

In this study, persistent organic pollutants were quantified in sediments, subsurface seawater, sea-surface microlayer and twenty-four biota species collected at two separate mangrove habitats in Singapore. Data confirmed the ubiquity of POPs, including polybrominated diphenyl ethers (PBDEs), in the marine environment of Singapore. A biomagnification phenomenon was observed amongst the species collected and analysed from both mangrove sites studied. Thunder crabs and fish displayed the highest POP levels. Congener profiles of PBDEs varied amongst mangrove biota species and suggested different metabolic pathways exist for flame retardants. Similarly, crab species showed an ability to metabolize chlordane insecticide.     

Impact of transverse and longitudinal dispersion on first-order degradation rate constant estimation

A two-dimensional analytical model is employed for estimating the first-order degradation rate constant of hydrophobic organic compounds (HOCs) in contaminated groundwater under steady-state conditions. The model may utilize all aqueous concentration data collected downgradient of a source area, but does not require that any data be collected along the plume centerline. Using a least squares fit of the model to aqueous concentrations measured in monitoring wells, degradation rate constants were estimated at a former manufactured gas plant (FMGP) site in the Midwest U.S. The estimated degradation rate constants are 0.0014, 0.0034, 0.0031, 0.0019, and 0.0053 day(-1) for acenaphthene, naphthalene, benzene, ethylbenzene, and toluene, respectively. These estimated rate constants were as low as one-half those estimated with the one-dimensional (centerline) approach of Buscheck and Alcantar [Buscheck, T.E., Alcantar, C.M., 1995. Regression techniques and analytical solutions to demonstrate intrinsic bioremediation. In: Hinchee, R.E., Wilson, J.T., Downey, D.C. (Eds.), Intrinsic Bioremediation, Battelle Press, Columbus, OH, pp. 109-116] which does not account for transverse dispersivity. Varying the transverse and longitudinal dispersivity values over one order of magnitude for toluene data obtained from the FMGP site resulted in nearly a threefold variation in the estimated degradation rate constant-highlighting the importance of reliable estimates of the dispersion coefficients for obtaining reasonable estimates of the degradation rate constants. These results have significant implications for decision making and site management where overestimation of a degradation rate may result in remediation times and bioconversion factors that exceed expectations. For a complex source area or non-steady-state plume, a superposition of analytical models that incorporate longitudinal and transverse dispersion and time may be used at sites where the centerline method would not be applicable.     

Assessment of intrinsic bioremediation of a coal-tar-affected aquifer using Two-dimensional reactive transport and Biogeochemical mass balance approaches.

Expedited site characterization and groundwater monitoring using direct-push technology and conventional monitoring wells were conducted at a former manufactured gas plant site. Biogeochemical data and heterotrophic plate counts support the presence of microbially mediated remediation. By superimposing solutions of a two-dimensional reactive transport analytical model, first-order degradation rate coefficients ((day-1) ) of various compounds for the dissolved-phase plume were estimated (i.e., benzene [0.0084], naphthalene [0.0058], and acenaphthene [0.0011]). The total mass transformed by aerobic respiration, nitrate reduction, and sulfate reduction around the free-phase coal-tar dense-nonaqueous-phase-liquid region and in the plume was estimated to be approximately 4.5 kg/y using a biogeochemical mass-balance approach. The total mass transformed using the degradation rate coefficients was estimated to be approximately 3.6 kg/y. Results showed that a simple two-dimensional analytical model and a biochemical mass balance with geochemical data from expedited site characterization can be useful for rapid estimation of mass-transformation rates.