Characterization of silver release from commercially available functional (nano)textiles

Silver, both in the nano as well as in other forms, is used in many applications including antimicrobial textiles. Washing of such textiles has already been identified as an important process that results in the release of silver into wastewater. This study thus investigated the release of silver from eight different commercially available silver-textiles during a washing and rinsing cycle. The silver released was size-fractionated and characterized using electron microscopy. In addition, the antimicrobial functionality of the textiles was tested before and after washing. Three of the textiles contained nanosized silver (labeled or confirmed by manufacturers’ information), another used a metallic silver wire and four contained silver in undeclared form. The initial silver content of the textiles was between 1.5 and 2925 mg Ag/kg. Only four of the investigated textiles leached detectable amounts of silver, of which 34-80% was in the form of particles larger than 450 nm. Microscopic analysis of the particles released in the washing solutions identified Ti/Si-AgCl nanocomposites, AgCl nanoparticles, large AgCl particles, nanosilver sulfide and metallic nano-Ag, respectively. The nanoparticles were mainly found in highly agglomerated form. The identified nanotextiles showed the highest antimicrobial activity, whereas some of the other textiles, e.g. the one with a silver wire and the one with the lowest silver content, did not reduce the growth of bacteria at all. The results show that different silver textiles release different forms of silver during washing and that among the textiles investigated AgCl was the most frequently observed chemical form in the washwater.     

Comparison of manufactured and black carbon nanoparticle concentrations in aquatic sediments

In this paper, we show that concentrations of manufactured carbon-based nanoparticles (MCNPs) in aquatic sediments will be negligible compared to levels of black carbon nanoparticles (BCNPs). This is concluded from model calculations accounting for MCNP sedimentation fluxes, removal rates due to aggregation or degradation, and MCNP burial in deeper sediment layers. The resultant steady state MCNP levels are compared with BCNP levels calculated from soot levels in sediments and weight fractions of nanosized fractions of these soot particles. MCNP/BCNP ratios range from 10⁻⁷ to 10⁻⁴ (w:w). This suggests that the often acclaimed effect of MCNPs on organic pollutant binding and bioavailability will likely be below the level of detection if natural BCNPs are present, even if binding to MCNP is one to two orders of magnitude stronger than to BCNPs. Furthermore, exposure and toxic effects of MCNPs in sediments and soils will be negligible compared to that of BCNPs.     

Engineered nanomaterials in rivers--exposure scenarios for Switzerland at high spatial and temporal resolution

Probabilistic material flow analysis and graph theory were combined to calculate predicted environmental concentrations (PECs) of engineered nanomaterials (ENMs) in Swiss rivers: 543 river sections were used to assess the geographical variability of nano-TiO₂, nano-ZnO and nano-Ag, and flow measurements over a 20-year period at 21 locations served to evaluate temporal variation. A conservative scenario assuming no ENM removal and an optimistic scenario covering complete ENM transformation/deposition were considered. ENM concentrations varied by a factor 5 due to uncertain ENM emissions (15%-85% quantiles of ENM emissions) and up to a factor of 10 due to temporal river flow variations (15%-85% quantiles of flow). The results indicate highly variable local PECs and a location- and time-dependent risk evaluation. Nano-TiO₂ median PECs ranged from 11 to 1′623 ng L⁻¹ (conservative scenario) and from 2 to 1′618 ng L⁻¹ (optimistic scenario). The equivalent values for nano-ZnO and nano-Ag were by factors of 14 and 240 smaller.     

Initial Changes in Refilled Lysimeters Built with Metal Polluted Topsoil and Acidic or Calcareous Subsoils as Indicated by Changes in Drainage Water Composition

Soil translocation for recultivation of soil removed from construction sites and for the preparation of refilled lysimeters inevitably involves disturbance of soil structure, and, if intermediate storage is included, also drying and rewetting of the soil. We report on an experiment with model forest ecosystems, where uncontaminated forest subsoils were covered with non-contaminated or freshly heavy metal (mainly Zn and Cu) contaminated topsoil in large lysimeters. Monitoring of the chemical composition of the drainage water revealed two distinct soil conditioning phases. During an initial phase of about a year strongly elevated nitrate and sulfate concentrations occurred that were attributed to a mineralisation flush caused by the increased accessability of mineralisable nitrogen and sulfur in destroyed aggregates. These effects were significantly larger in lysimeters with calcareous subsoil than in those with acidic subsoil. The second phase was characterised by a gradual decrease in dissolved organic carbon and sulfate concentrations, in particular in the acidic subsoil. This decrease may be attributed to the depletion of pools made accessible during aggregate destruction or the formation of new aggregates. These chemical changes had only little effects on the concentrations of copper and zinc in the drainage water. Based on our results, it can be concluded that large refilled lysimeters can be used for many purposes without risk of compromised results, if a conditioning phase of about 1 year with sufficiently moist soil conditions is respected. Nevertheless, gradual changes in soil chemical characteristics still occur after this initial phase. Implications for the recultivation of sites using relocated soils are discussed.     

The influence of EDDS on the uptake of heavy metals in hydroponically grown sunflowers

Phytoextraction is an environmentally friendly in situ technique for cleaning up metal contaminated land. Unfortunately, efficient metal uptake by remediation plants is often limited by low phytoavailability of the targeted metals. Chelant assisted phytoextraction has been proposed to improve the efficiency of phytoextraction. Phytoremediation involves several subsequent steps: transfer of metals from the bulk soil to the root surfaces, uptake into the roots and translocation to the shoots. Nutrient solution experiments address the latter two steps. In this context we investigated the influence of the biodegradable chelating agent SS-EDDS on uptake of essential (Cu and Zn) and non-essential (Pb) metals by sunflowers from nutrient solution. EDDS was detected in shoots and xylem sap for the first time, proving that it is taken up into the above ground biomass of plants. The essential metals Cu and Zn were decreased in shoots in the presence of EDDS whereas uptake of the non-essential Pb was enhanced. We suggest that in the presence of EDDS all three metals were taken up by the non-selective apoplastic pathway as the EDDS complexes, whereas in the absence of EDDS essential metal uptake was primarily selective along the symplastic pathway. This shows that synthetic chelating agents do not necessarily increase uptake of heavy metals, when soluble concentrations are equal in the presence and absence of chelates.     

Environmental and health effects of nanomaterials in nanotextiles and façade coatings

Engineered nanomaterials (ENM) are expected to hold considerable potential for products that offer improved or novel functionalities. For example, nanotechnologies could open the way for the use of textile products outside their traditional fields of applications, for example, in the construction, medical, automobile, environmental and safety technology sectors. Consequently, nanotextiles could become ubiquitous in industrial and consumer products in future. Another ubiquitous field of application for ENM is fa?ade coatings. The environment and human health could be affected by unintended release of ENM from these products. The product life cycle and the product design determine the various environmental and health exposure situations. For example, ENM unintentionally released from geotextiles will probably end up in soils, whereas ENM unintentionally released from T-shirts may come into direct contact with humans and end up in wastewater. In this paper we have assessed the state of the art of ENM effects on the environment and human health on the basis of selected environmental and nanotoxicological studies and on our own environmental exposure modeling studies. Here, we focused on ENM that are already applied or may be applied in future to textile products and fa?ade coatings. These ENM's are mainly nanosilver (nano-Ag), nano titanium dioxide (nano-TiO(2)), nano silica (nano-SiO(2)), nano zinc oxide (nano-ZnO), nano alumina (nano-Al(2)O(3)), layered silica (e.g. montmorillonite, Al(2)[(OH)(2)/Si(4)O(10)]nH(2)O), carbon black, and carbon nanotubes (CNT). Knowing full well that innovators have to take decisions today, we have presented some criteria that should be useful in systematically analyzing and interpreting the state of the art on the effects of ENM. For the environment we established the following criteria: (1) the indication for hazardous effects, (2) dissolution in water increases/decreases toxic effects, (3) tendency for agglomeration or sedimentation, (4) fate during waste water treatment, and (5) stability during incineration. For human health the following criteria were defined: (1) acute toxicity, (2) chronic toxicity, (3) impairment of DNA, (4) crossing and damaging of tissue barriers, (5) brain damage and translocation and effects of ENM in the (6) skin, (7) gastrointestinal or (8) respiratory tract. Interestingly, some ENM might affect the environment less severely than they might affect human health, whereas the case for others is vice versa. This is especially true for CNT. The assessment of the environmental risks is highly dependent on the respective product life cycles and on the amounts of ENM produced globally.     

Biodegradation and speciation of residual SS-ethylenediaminedisuccinic acid (EDDS) in soil solution left after soil washing

This paper aims to investigate the degradation and speciation of EDDS-complexes (SS-ethylenediaminedisuccinic acid) in soil following soil washing. The changes in soil solution metal and EDDS concentrations were investigated for three polluted soils. EDDS was degraded after a lag phase of 7-11 days with a half-life of 4.18-5.60 days. No influence of EDDS-speciation on the reaction was observed. The decrease in EDDS resulted in a corresponding decrease in solubilized metals. Changes in EDDS speciation can be related to (1) initial composition of the soil, (2) temporarily anoxic conditions in the soil slurry after soil washing, (3) exchange of EDDS complexes with Cu even in soils without elevated Cu and (4) formation of NiEDDS. Dissolved organic matter is important for metal speciation at low EDDS concentrations. Our results show that even in polluted soils EDDS is degraded from a level of several hundred micromoles to below 1 microM within 50 days.     

Growth of Lygeum spartum in acid mine tailings: response of plants developed from seedlings, rhizomes and at field conditions

Lygeum spartum is a native species in semiarid Mediterranean areas that grows spontaneously on acid mine tailings. We aimed to study the suitability of this plant for phytostabilization. L. spartum was grown from both seeds and rhizomes in acid mine tailings with various fertilizer and lime treatments. Untreated soils had a solution pH of 2.9 with high concentrations of dissolved salts (Electrical Conductivity 25 dS m(-1)) and Zn (3100 mg L(-1)). Plants grown on untreated soil had high shoot metal concentrations (>4000 mg kg(-1)Zn). Liming increased the solution pH to 5.5 and reduced the dissolved salts by more than 75%, resulting in lower shoot metal accumulation. Plants grown from rhizomes accumulated less metal than those grown from seeds. Plants collected in the field had metal concentrations an order of magnitude less than plants raised in the growth chamber. These differences may be due to the higher moisture content and homogeneous nature of the soils used in the pot experiment.