A Comparative Study of Doum fiber and Shrimp Chitin Based Reinforced Low Density Polyethylene Biocomposites

The aim of this paper was to study the effects of reinforcing low density polyethylene (LDPE) by using bio-fillers (Doum cellulose or Shrimp chitin) on the mechanical properties. Both, Doum cellulose extracted frsom Doum leaves and Shrimp chitin extracted from shrimp co-products were compounded with LPDE without and with compatibilizer. The biocomposites were prepared by melt blending in a twin-screw extruder. Torsion and flexural tests were performed to investigate the impact of each reinforcement on the biocomposite mechanical properties. The SEM was carried out to study the filler/polymer interface adhesion. The present study has demonstrated that Doum fibers and shrimp chitin succeed in improving the mechanical properties of LPDE bio-composites. The results also showed that the use of maleic anhydride-grafted polyethylene as a compatibilizer improves filler adhesion/matrix and mechanical properties. This study exhibits that polyethylene composites based on Doum fibers or shrimp chitin can be used to replace the polyethylene materials in several fields like packaging and automotive industries.     

Managing Mediterranean soil resources under global change: expected trends and mitigation strategies

Regional Environmental Change - The soils of the Mediterranean Basin are the products of soil processes that have been governed by a unique convergence of highly differentiated natural and...     

Toxic Effect of a Pesticide, Diflubenzuron on Freshwater Microinvertebrate (Tetrahymena pyriformis)

Harmful bugs affect food production,directly by the qualitativeor quantitative reduction of the harvests,or indirectly while servinglike vectors of several illnesses of the plants and human[1].Many chemical products are used by human for a long time inthe…     

Sodium arsenate induce changes in fatty acids profiles and oxidative damage in kidney of rats

Six groups of rats (n?=?10 per group) were exposed to 1 and 10 mg/l of sodium arsenate for 45 and 90 days. Kidneys from treated groups exposed to arsenic showed higher levels of trans isomers of oleic and linoleic acids as trans C181n-9, trans C18:1n-11, and trans C18:2n-6 isomers. However, a significant decrease in eicosenoic (C20:1n-9) and arachidonic (C20:4n-6) acids were observed in treated rats. Moreover, the “Δ5 desaturase index” and the saturated/polyunsaturated fatty acids ratio were increased. There was a significant increase in the level of malondialdehyde at 10 mg/l of treatment and in the amount of conjugated dienes after 90 days (p?p?p?p?n-6 polyunsaturated fatty acids and leads to an increase in the trans FAs isomers. Therefore, FA-induced arsenate kidney damage could contribute to trigger kidney cancer.     

Spreading of oil on water in the surface-tension regime

The third stage of oil spreading on water, in which surface-tension force promotes spreading against the resisting viscous effect, is investigated using a similarity solution in combination with an integral boundary-layer technique to solve the unidirectional oil-spreading dynamics problem in the last stage of spreading. The thin layer is assumed to be supplied by oil from a bulk boundary. Using a constitutive equation for oil-film surface tension versus oil-film thickness, analytical solutions near the bulk boundary and near the edge are developed. Using the asymptotic solutions to initiate integration, the differential equations for the oil thickness, oil velocity, and boundary-layer profiles are integrated starting from the leading edge and bulk boundary, which after matching provide a complete solution. The results for the spreading-law prefactors are found to differ by about 10 % from published theoretical results using the same constitutive equation. Using an empirical constitutive equation for oil-film surface tension versus distance from the bulk boundary leads to a spreading-law prefactor that is in excellent agreement with the published experimental result and published theoretical work providing and using the same empirical constitutive equation.     

Monotonic aspects of the mechanical behaviour of bottom ash from municipal solid waste incineration and its potential use for road construction

Municipal solid waste incineration (MSWI) bottom ash is an atypical granular material because it may include industrial by-products that result from the incineration of domestic waste. The prospects for the beneficial use of this particular material mainly lie in the field of road construction, as a substitute for the traditional natural aggregates. However, its mechanical properties are still little known, particularly in term of stiffness and deformability, characteristics that are essential to the construction of a durable roadway. The purpose of this paper is to describe better the mechanical behaviour of this recycled material. In order to reach this objective, a large experimental campaign is presented. The first part of this paper presents and comments in detail on the results obtained from static monotonic tests. Oedometric and triaxial shear tests were performed on MSWI bottom ash both before and after treatment with a specific hydraulic binder. These tests allow specification of the mechanical characteristics of the MSWI bottom ash, such as the initial Young's modulus, Poisson's ratio, the compressibility index, the friction angle, and the contracting or dilating behaviour of the material. The results reveal a mechanical behaviour similar to that of initially dense standard materials (sands, unbound granular materials) and a dependence on the applied average pressure, characteristic of the mechanical behaviour of granular media. More laboratory data on other samples of MSWI bottom ash are required to ensure that this comparison is statistically valid.     

Phosphogypsum Waste Used as Reinforcing Fillers in Polypropylene Based Composites: Structural,Mechanical and Thermal Properties

The industrial production of wet phosphoric acid in Morocco led to controversial stockpiling of waste phosphogypsum by-products resulting in the release of significant amounts of toxic impurities in salt marshes. In the framework of fighting against global climate change and efforts to reduce toxic industrial wastes (phosphate industry), this work presents a new polymer composite based on phosphogypsum (PhG) and polypropylene (PP).The compounds were produced by twin-screw extrusion and injection molding. The morphological results show that good affinity between PhG and PP led to good particle dispersion/distribution in the polymer matrix. Thermal characterizations showed that PhG particles improved the thermal stability of PP with a 50 °C increase at 40 wt%. The optimum tensile modulus was also obtained at 40 wt% with a 74 % increase over neat PP. Dynamical mechanical analysis showed that PhG addition can improve the viscoelastic properties of PP for potential applications under dynamic stress. Overall, it can be concluded that PhG is potential reinforcing filler for the production of PP composites and represents a promising avenue for the valorization of this waste as a new raw material while resolving some environmental issues.     

Targeting of observations for accidental atmospheric release monitoring

In the event of an accidental atmospheric release of radionuclides from a nuclear power plant, accurate real-time forecasting of the activity concentrations of radionuclides is acutely required by the decision makers for the preparation of adequate countermeasures. Yet, the accuracy of the forecasted plume is highly dependent on the source term estimation. Inverse modelling and data assimilation techniques should help in that respect. However the plume can locally be thin and could avoid a significant part of the radiological monitoring network surrounding the plant. Deploying mobile measuring stations following the accident could help to improve the source term estimation. In this paper, a method is proposed for the sequential reconstruction of the plume, by coupling a sequential data assimilation algorithm based on inverse modelling with an observation targeting strategy. The targeting design strategy consists in seeking the optimal locations of the mobile monitors at time t + 1 based on all available observations up to time t.The performance of the sequential assimilation with and without targeting of observations has been assessed in a realistic framework. It focuses on the Bugey nuclear power plant (France) and its surroundings within 50 km from the plant. The existing surveillance network is used and realistic observational errors are assumed. The targeting scheme leads to a better estimation of the source term as well as the activity concentrations in the domain. The mobile stations tend to be deployed along plume contours, where activity concentration gradients are important. It is shown that the information carried by the targeted observations is very significant, as compared to the information content of fixed observations. A simple test on the impact of model error from meteorology shows that the targeting strategy is still very useful in a more uncertain context.