Water vapor permeability of biodegradable polymers

The water vapor transmission rates (WVTR) of several biodegradable polymers were evaluated to determine their suitability as water-resistant coatings and to understand WVTR better in terms of polymer structure. Values of WVTR at 25‡C ranged from 13 to 2900 g/m² /day and increased in the order PHBV PLA (cryst.) PLA (amorph.) PCL Bionolle BAK 1095 CAP CA. Values of WVTR were positively correlated with higher polymer solubility parameters, lower crystallinities, and higher free volumes. Although the WVTR of biodegradable polymers are much higher than those of good barrier materials such as low-density polyethylene, they are sufficient for short-term (hours to days) protection of polysaccharide-based materials against water. Product names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Poly(ethylene oxide)-coated granular starch-poly(hydroxybutyrate-co-hydroxyvalerate) composite materials

Granular cornstarch was coated with several biodegradable polymers in an effort to improve the mechanical properties of starch-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) composites. Only samples containing poly(ethylene oxide) (PEO)-coated granular starch showed a large improvement in tensile properties over uncoated starch. For example, a 50/50 blend of PEO-coated starch and PHBV had a tensile strength of 19 MPa and an ultimate elongation of 23%, compared to 10 MPa and 11% for a similar blend containing uncoated starch. PEO may act as an adhesive between the starch and the PHBV and/or increase the toughness and resistance to crack growth of PHBV around the starch granules.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Environmental Conflicts and the SLAPP

A citizen has the right to challenge a firm's actions regarding development plans or violations of environmental laws. Firms have responded with the SLAPP—Strategic Lawsuit Against Public Participation. Fearing the loss of the Constitutional Right to Petition, several U.S. states have or are considering explicitly restricting the SLAPP. For a class of environmental conflict models with one-sided asymmetric information, our results suggest that restricting the SLAPP does not increase the efficiency of the dispute.     

Biodegradation of Injection Molded Starch-Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) Blends in a Natural Compost Environment

Injection molded specimens were prepared by blending poly (hydroxybutyrate-co-valerate) (PHBV) with cornstarch. Blended formulations incorporated 30% or 50% starch in the presence or absence of poly-(ethylene oxide) (PEO), which enhances the adherence of starch granules to PHBV. These formulations were evaluated for their biodegradability in natural compost by measuring changes in physical and chemical properties over a period of 125 days. The degradation of plastic material, as evidenced by weight loss and deterioration in tensile properties, correlated with the amount of starch present in the blends (neat PHBV < 30% starch < 50% starch). Incorporation of PEO into starch-PHBV blends had little or no effect on the rate of weight loss. Starch in blends degraded faster than PHBV and it accelerated PHBV degradation. Also, PHBV did not retard starch degradation. After 125 days of exposure to compost, neat PHBV lost 7% of its weight (0.056% weight loss/day), while the PHBV component of a 50% starch blend lost 41% of its weight (0.328% weight loss/day). PHB and PHV moieties within the copolymer degraded at similar rates, regardless of the presence of starch, as determined by ¹H-NMR spectroscopy. GPC analyses revealed that, while the number average molecular weight (Mn) of PHBV in all exposed samples decreased, there was no significant difference in this decrease between neat PHBV as opposed to PHBV blended with starch. SEM showed homogeneously distributed starch granules embedded in a PHBV matrix, typical of a filler material. Starch granules were rapidly depleted during exposure to compost, increasing the surface area of the PHBV matrix.     

Mineral licks: motivational factors for visitation and accompanying disease risk at communal use sites of elk and deer

Free-ranging cervids acquire most of their essential minerals through forage consumption, though occasionally seek other sources to account for seasonal mineral deficiencies. Mineral sources occur as natural geological deposits (i.e., licks) or as anthropogenic mineral supplements. In both scenarios, these sources commonly serve as focal sites for visitation. We monitored 11 licks in Rocky Mountain National Park, north-central Colorado, using trail cameras to quantify daily visitation indices (DVI) and soil consumption indices (SCI) for Rocky Mountain elk (Cervus elaphus) and mule deer (Odocoileus hemionus) during summer 2006 and documented elk, mule deer, and moose (Alces alces) visiting licks. Additionally, soil samples were collected, and mineral concentrations were compared to discern levels that explain rates of visitation. Relationships between response variables; DVI and SCI, and explanatory variables; elevation class, moisture class, period of study, and concentrations of minerals were examined. We found that DVI and SCI were greatest at two wet, low-elevation licks exhibiting relatively high concentrations of manganese and sodium. Because cervids are known to seek Na from soils, we suggest our observed association of Mn with DVI and SCI was a likely consequence of deer and elk seeking supplemental dietary Na. Additionally, highly utilized licks such as these provide an area of concentrated cervid occupation and interaction, thus increasing risk for environmental transmission of infectious pathogens such as chronic wasting disease, which has been shown to be shed in the saliva, urine, and feces of infected cervids.     

Environmental federalism and environmental liability

Environmental federalism considers what level of government should optimally regulate pollution. This paper addresses this question for accidental pollution, which government regulates through the ex post liability regimes of either negligence or strict liability. We find that decentralizing the choice between these regimes does not, in general, induce the socially optimal outcome. When firms can pay all damages, all regions may choose negligence and impose an overly strict standard of due care. When firms may be bankrupted by damages, all regions may choose strict liability, which induces too little care. In addition, asymmetric equilibria are possible in which some regions choose negligence, others strict liability. Combining negligence with a Pigovian tax, or strict liability with a bonding requirement can align regional authorities' incentives with those of a central government.     

Solvent-Free Polymerization of l-Aspartic Acid in the Presence of d-Sorbitol to Obtain Water Soluble or Network Copolymers

l-Aspartic acid was thermally polymerized in the presence of d-sorbitol with the goal of synthesizing new, higher molecular weight water soluble and absorbent copolymers. No reaction occurred when aspartic acid alone was heated at 170 or 200 °C. In contrast, heating sorbitol and aspartic acid neat or with ammonium hydroxide gave a mixture of water soluble and insoluble copolymers of polysuccinimide and sorbitol. In the presence of phosphoric acid, sorbitol aspartate ester copolymers having both water soluble and highly swollen gel components were formed. These results indicate that polysaccharides such as sorbitol can readily react to form copolymer ester/amides with aspartic acid and such copolymers may have utility as biodegradable water soluble and swellable polyampholytes.     

Pre-sampling contamination of filters used in measurements of airborne (1 → 3)-β-D-glucan based on glucan-specific Limulus amebocyte lysate assay

Air sampling for (1 → 3)-β-D-glucan may be a good method for assessing inhalation exposure to airborne fungi. Pre-sampling contamination of filter media used for sampling (1 → 3)-β-D-glucan may lead to substantial exposure measurement errors. Using the Limulus amebocyte lysate assay, we tested for pre-sampling levels of (1 → 3)-β-D-glucan on three types of filters-mixed cellulose ester (MCE)[1 brand], glass fiber (GF)[1 brand], and polycarbonate (PC)[5 brands]. Levels of (1 → 3)-β-D-glucan on MCE filters exceeded 4586.1 pg per filter. Levels on GF filters averaged 135.3 (± 28.9) pg per filter (range = 94.8-160.4 pg per filter) and levels on PC filters averaged 152.4 (± 236.1) pg per filter (range = non-detectable-1760.7 pg per filter). Efforts to clean MCE and GF filters were unfeasible or unsuccessful. Sonicating PC filters for two hours in ethanol, followed by a wash in pyrogen-free water, effectively eliminated measured levels of (1 → 3)-β-D-glucan on four brands of PC filters, as compared to untreated PC filters. This pretreatment process did not appear to physically damage the PC filters. Air sampling results highlighted the potentially problematic contamination of untreated PC filters. Ensuring that sampling media are free of (1 → 3)-β-D-glucan before sampling is crucial to accurately measure levels of (1 → 3)-β-D-glucan exposure, especially in environments where levels of (1 → 3)-β-D-glucan are low.     

Pulmonary inflammation induced by office dust and the relation to 1 → 3-β-glucan using different extraction techniques

It is observed that 1?→?3-β-glucan, a major cell wall component of fungi, induces pulmonary inflammation. There is inconsistency in determining the correlation between the levels of glucan measured by current extraction methods and the respiratory inflammation observed in individuals or lab animals exposed to environmental dust samples. The glucan-specific limulus amebocyte lysate (G-LAL) method was used after extraction with dimethyl sulfoxide (DMSO) or sodium hydroxide (NaOH) to analyze the glucan content of office dust samples collected from a water-damaged building. C3HeB/FeJ mice, an endotoxin-sensitive strain, were treated with different dust samples (2.5?mg?kg^?1 body weight) or saline (vehicle control) by pharyngeal aspiration. At 1?day after aspiration, bronchoalveolar lavage (BAL) was performed, and lung inflammation and injury were assessed by measuring: (1) neutrophil (PMN) infiltration, (2) inflammatory cytokine (IL-6, IL-10, MCP-1, IFN-γ, TNF-α, and IL12-p70) levels, and (3) albumin and lactate dehydrogenase in recovered BAL fluid. Both DMSO and NaOH extraction increased the detection of glucan by approximately 20-fold compared to water extraction. However, only the DMSO extraction method showed a statistically significant positive correlation between 1?→?3-β-glucan and albumin levels, total numbers of BAL, polymorphonuclear leukocytes (PMNs) cells recovered, levels of TNF-α, MCP-1, and IL-6. In conclusion, 1?→?3-β-glucan is a potent inflammatory agent in dust samples and DMSO extraction for glucan analysis may prove useful in understanding the impact of environmental contamination by glucans on lung disease.     

Soil water and particle size distribution influence laboratory-generated PM10

Management of soils to reduce the amount of PM₁₀ emitted during agricultural tillage operations is important for attainment of air quality standards in California's San Joaquin Valley (SJV). The purpose of this study was to improve and expand upon earlier work of predicting tillage-generated dust emissions based on soil properties. We focus on gravimetric soil water content (GWC) and soil texture. A mechanical laboratory dust generator was used to test 23 soils collected for this study. Averaged results showed PM₁₀ concentrations (mg m^?3) increased logarithmically as GWC decreased below soil water potentials of ?1500 kPa. Soils with clay contents less than about 10% by weight began to emit PM₁₀ at GWCs 1.5–4 times their GWC at ?1500 kPa. Soils with clay contents greater than about 10% began to emit PM₁₀ at GWC values closer to ?1500 kPa. We found no correlation between maximum PM₁₀ concentrations, measured at low GWC values, and the %sand, %silt, or %clay in a soil. However, there was a significant correlation between the %silt to %clay ratio and PM₁₀ concentrations. This not only suggests the dependence of dust emission magnitudes on the supply of particles of PM₁₀ size, but also the importance of clay in stabilizing aggregates and maintaining higher amounts of capillary water at lower water potentials. Based on modeled results of pooled data, PM₁₀ concentrations increased linearly (slope = 564) for every unit increase in the %silt to %clay ratio. However, when soils were separated into groups based on clay content, the slopes for PM₁₀ concentrations vs. %silt to %clay ratio were texture dependent. The slope for soils with <10% clay (slope = 727) was 3.3 times greater than for soils with >20% clay (slope = 221). Improved PM₁₀ emission prediction based on soil properties should improve management decisions aimed at reducing tillage-generated PM₁₀.