Pore structure and adsorption properties of activated carbon prepared from granular molded waste paper

We have previously manufactured activated carbon using waste paper board, which was prepared by adding 8% phenol resin adhesive to torn waste newspaper and hot-pressing. In this study, the pretreatment process of the raw material was simplified; the waste paper was extruded to form granules. The activated carbon was manufactured by the carbon dioxide activation method using the granules as the raw material. The properties of the activated carbon were evaluated based on the pore structure, the iodine adsorption number, and the adsorption of toluene vapor in a sealed chamber. The activated carbon, which was manufactured at an activation temperature of 1100°C and a treatment time of 60min, exhibited a specific surface area of 1241m²/g and an iodine adsorption number of 1120mg/g. These results were similar to those obtained for two commercially available activated carbons. The extent of toluene vapor adsorption by this activated carbon was similar to that observed for the two commercial activated carbons over a period of 130min.     

Photodegradation of tetraphenyltin contained in polychlorinated biphenyl-based transformer oil simulants in alkaline 2-propanol solution

The photodegradation of tetraphenyltin (TePT) contained in polychlorinated biphenyl (PCB)-based transformer oil simulants by ultraviolet (UV) irradiation in alkaline 2-propanol solutions was examined. In the absence of PCBs, the TePT level fell to below 1% of the initial concentration within 30 min. In the absence of both PCBs and an alkali, the concentrations of tri-, di-, and monophenyltins initially increased to a few milligrams per liter, and then reduced to below the detection limits within 90 min. The addition of an alkali to the reaction solution slightly accelerated the photodecomposition of TePT. The decomposition of other phenyltins (PTs) was also accelerated. When PCBs with concentrations of approximately 80 times the initial TePT concentration were added, only a small fraction of the TePT decomposed within 100 min. Moreover, the levels of PTs did not change during irradiation. TePT and other PTs did decompose when the level of PCBs was reduced to the same concentration as that of TePT; however, the decomposition rates were slower than those in the absence of PCBs. In the actual treatment process, TePT and other PTs in PCB-based transformer oil are decomposed by catalytic reduction, which is used after UV irradiation. Therefore, in the actual treatment of PCB-based transformer oil wastes, pollution due to PTs can be prevented.     

Adjoint inverse modeling of NOx emissions over eastern China using satellite observations of NO2 vertical column densities

A four-dimensional variational data assimilation system for optimization of NO_x emissions (RC4-NO_x) was developed. A parameterized NO_x chemistry scheme was introduced into the RC4-NO_x system, and key parameters such as chemical production and loss terms of NO_x were calculated in advance using the Community Multiscale Air Quality (CMAQ) modeling system. RC4-NO_x was applied to optimize NO_x emissions over eastern China (EC) in July 1996, 1999, and 2002 using Global Ozone Monitoring Experiment (GOME) satellite observations of NO₂ vertical column densities (VCDs) and a priori emissions from the Regional Emission Inventory in Asia (REAS). After assimilation, RC4-NO_x generally reproduced the spatial distribution, regional averaged values, and time evolution of GOME NO₂ VCDs. Over EC, a priori emissions were reduced by 20% in 1996 and by 8% in 1999, whereas a posteriori emissions were almost the same as a priori emissions in 2002. A priori emissions in the Beijing region were reduced by optimization over the whole simulation period. A posteriori emissions over the Yangtze Delta were larger than a priori emissions in 2002, although they were smaller in both 1996 and 1999. As in other areas, a priori emissions over the North China Plain were reduced in 1996; but those over the eastern part of the plain were increased in 1999, and the area of increased emissions moved slightly westward in 2002. In each region, the growth rates of a posteriori emissions during both 1996–1999 and 1999–2002 became generally larger than those of a priori emissions, and the trends of a posteriori emissions became similar to those of GOME NO₂ VCDs. Our inverse modeling analysis indicates that the rate of increase of NO_x emissions over EC from 1996 to 2002 was much larger for a posteriori emissions (49%) than for a priori emissions (19%).     

Production of biologically safe digested manure for land application by a full-scale biogas plant with heat-inactivation

Inactivation of indigenous indicator micro-organisms such as faecal coliforms, coliphages, and faecal streptococci was investigated in a full-scale biogas plant that mainly digested cow manure. The biogas plant consisted principally of a feed reservoir, fermentation tank (37 degrees C), heat-inactivation process (70 degrees C), and five reservoirs for the heat-inactivated, digested manure that was used by a local livestock farmer as liquid fertilizer. Although all the indicators tended to exhibit stepwise decreases with each stage of treatment, coliphages were found to be more capable of surviving than faecal coliforms and faecal streptococci under mesophilic anaerobic conditions as well as high temperature conditions (heat-inactivation at 70 degrees C). Liquid fertilizer produced at the biogas plant had faecal coliform densities less than the stipulations of the US EPA 40 CFR 503 Class A limits. Heat-inactivation tests indicated that although coliphages exhibited more tolerance than other bacterial indicators between 37 and 70 degrees C, they were more sensitive to continuous temperature increase than faecal coliforms and faecal streptococci.     

Canopy compass in nocturnal homing of the subsocial shield bug, <Emphasis Type="Italic">Parastrachia japonensis</Emphasis> (Heteroptera: Parastrachiidae)

In contrast to an open environment where a specific celestial cue is predominantly used, visual contrast of canopies against the sky through the gap, known as canopy cues, is known to play a major role for visually guided insect navigators in woodland habitats. In this paper, we investigated whether a subsocial shield bug, Parastrachia japonensis, could gauge direction using canopy cues on a moonless night. The results show that they could perform the round trip foraging behaviour even in an experimental arena with only an artificial round gap opened in the ceiling of the arena and adjust their homing direction for a new azimuth when the gap was rotated. Thus, P. japonensis can use slightly brighter canopy cues as a compass reference but not complex landmarks during nocturnal homing behaviour.     

A novel mechanical plant compression system for biomass fuel and acquisition of squeezed liquid with water-soluble lignin as anti-virus materials

Journal of Material Cycles and Waste Management - Plant biomass could be a viable alternative renewable resource, but the moisture content must be reduced to use it as fuel. Mechanical compression...     

Regional-specific emission inventory for NH3, N2O, and CH4 via animal farming in South, Southeast, and East Asia

Ammonia, nitrous oxide, and methane emission from animal farming of South, Southeast, and East Asia, in 2000, was estimated at about 4.7 Tg NH₃–N, 0.51 Tg N₂O–N, and 29.9 Tg CH₄, respectively, using the FAO database and countries’ statistic databases as activity data, and emission factors taking account of regional characteristics. Most of these atmospheric components, up to 60–80%, were produced in China and India. Pakistan, Bangladesh, and Indonesia, which were large source countries next to China and India, contributed more than a few percent of total emission of each atmospheric component. The largest emission livestock were cattle whose contribution was considerably high in South, Southeast, and East Asia; more than one-fourth of ammonia and nitrous oxide emissions: more than half of methane emission. The other major livestock for nitrous oxide and ammonia emissions were pigs. For methane emission, buffaloes were second source livestock. To provide spatial distributions of these gases, the emissions of county and district level were allocated into each 0.5° grid by means of the weighting by high-resolution land cover datasets. The regions with considerable high emissions of all components were able to be found at the Ganges delta and the Yellow River basin. The spatial distributions for ammonia and nitrous oxide emissions were similar but had a substantial difference from methane distribution.     

An Urban Atmospheric Diffusion Model for Traffic-Related Emission Based on Mass-Conservation and Advection-Diffusion Equations

This paper proposes an atmospheric diffusion model for traffic-related emission in urban areas within a few hundred meters from relevant roads. The model adopts the mass-conservation (MC) principle for the velocity calculation and the advection-diffusion (AD) equation for the concentration calculation. This MC+AD combination was chosen to achieve fast calculation for complex geometries. To compensate for the inherent deficiencies of MC and AD, as many known properties possible of turbulent boundary-layer flow over obstacles are incorporated into the MC calculation, and the diffusivity in AD is derived from the velocity spectrum as a function of distance from the emission source. The model is evaluated against wind-tunnel experiments ranging from point-source emission in uniform urban canopy to along-road emission in real city geometries. The model performs well in relatively simple configurations, but the performance deteriorates considerably as the complexity increases. However, in real city geometries, the model exhibits distinctly better performance in terms of statistical indices than a conventional Gaussian-plume model that neglects the effect of individual buildings. The model is therefore a viable option for environmental assessment.