Referencing of street-level flows measured during the DAPPLE 2004 campaign

Street-level mean flow and turbulence govern the dispersion of gases away from their sources in urban areas. A suitable reference measurement in the driving flow above the urban canopy is needed to both understand and model complex street-level flow for pollutant dispersion or emergency response purposes. In vegetation canopies, a reference at mean canopy height is often used, but it is unclear whether this is suitable for urban canopies. This paper presents an evaluation of the quality of reference measurements at both roof-top (height = H) and at height z = 9H = 190 m, and their ability to explain mean and turbulent variations of street-level flow. Fast response wind data were measured at street canyon and reference sites during the six-week long DAPPLE project field campaign in spring 2004, in central London, UK, and an averaging time of 10 min was used to distinguish recirculation-type mean flow patterns from turbulence. Flow distortion at each reference site was assessed by considering turbulence intensity and streamline deflection. Then each reference was used as the dependent variable in the model of Dobre et al. (2005) which decomposes street-level flow into channelling and recirculating components. The high reference explained more of the variability of the mean flow. Coupling of turbulent kinetic energy was also stronger between street-level and the high reference flow rather than the roof-top. This coupling was weaker when overnight flow was stratified, and turbulence was suppressed at the high reference site. However, such events were rare (<1% of data) over the six-week long period. The potential usefulness of a centralised, high reference site in London was thus demonstrated with application to emergency response and air quality modelling.     

A field study of factors influencing the concentrations of a traffic-related pollutant in the vicinity of a complex urban junction

The paper describes a field study focused on the dispersion of a traffic-related pollutant within an area close to a busy intersection between two street canyons in Central London. Simultaneous measurements of airflow, traffic flow and carbon monoxide concentrations ([CO]) are used to explore the causes of spatial variability in [CO] over a full range of background wind directions. Depending on the roof-top wind direction, evidence of both flow channelling and recirculation regimes were identified from data collected within the main canyon and the intersection. However, at the intersection, the merging of channelled flows from the canyons increased the flow complexity and turbulence intensity. These features, coupled with the close proximity of nearby queuing traffic in several directions, led to the highest overall time-average measured [CO] occurring at the intersection. Within the main street canyon, the data supported the presence of a helical flow regime for oblique roof-top flows, leading to increased [CO] on the canyon leeward side. Predominant wind directions led to some locations having significantly higher diurnal average [CO] due to being mostly on the canyon leeward side during the study period. For all locations, small changes in the background wind direction could cause large changes in the in-street mean wind angle and local turbulence intensity, implying that dispersion mechanisms would be highly sensitive to small changes in above roof flows. During peak traffic flow periods, concentrations within parallel side streets were approximately four times lower than within the main canyon and intersection which has implications for controlling personal exposure. Overall, the results illustrate that pollutant concentrations can be highly spatially variable over even short distances within complex urban geometries, and that synoptic wind patterns, traffic queue location and building topologies all play a role in determining where pollutant hot spots occur.     

Biodegradation Behavior of Composite Films with Poly (Vinyl Alcohol) Matrix

The main objective of this study was to develop biodegradable, composite materials, based on poly (vinyl alcohol), bacterial cellulose and chitosan for possible application in packaging industry. Two composite materials were prepared, one containing poly (vinyl alcohol) (PVA) and bacterial cellulose (BC), named PVA/BC, and the other containing PVA, BC but also chitosan (CTS), named PVA/BC/CTS. The biodegradation behavior was studied in a fed-batch bioreactor, in aerobic and anaerobic conditions, using activated sludge. Biodegradation tests were based on weight loss measurements. Structural changes were confirmed by Fourier transform infrared spectroscopy (FTIR) and the morphological ones by scanning electron microscopy (SEM). After 4?weeks, the biodegradation experiments have shown a relative high degradation of the PVA/BC/CTS film compared with the PVA/BC one. These results were confirmed by spectral analysis and also by SEM images. Besides, the SEM images revealed that biodegradation occurs also inside the composite materials, not only on the surface.     

Forest health status in the Carpathian Mountains over the period 1997-2001

The results of forest health status assessments in the Carpathian Mountains from the monitoring networks developed by the European Union Scheme on the Protection of Forest Against Atmospheric Pollution (EU Scheme) and International Co-operative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP-Forests), have led to a better understanding of the impact of air pollution and other stressors on forests at the regional scale. During the period 1997-2001, forests in the Carpathian Mountains were severely affected by air pollution and natural stresses with 29.7-34.9% of the trees included in defoliation classes 2-4. The broadleaves were slightly healthier than the conifers, and European beech (Fagus sylvatica) was the least affected species. Norway spruce (Picea abies) has poor health status, with 42.9-46.6% of the trees damaged (2-4% defoliation classes). Silver fir (Abies alba) damage was also high, with 46.0-50.9% in defoliation classes 2-4. Pines (primarily Pinus sylvestris) were the least affected of the conifers, with 24.9-33.8% in defoliation classes 2-4. The results from the transnational networks (16 x 16 km) show that the Carpathian forests are slightly more damaged than the average for the entire Europe. The correlative studies performed in individual European countries show the relationships between air pollution stressors with trends in defoliation and a possible effect of natural stresses at each site. More specific, effects of tree age, drought, ozone and acid deposition critical level exceedances were demonstrated to affect crown condition.     

Air pollution, precipitation chemistry and forest health in the Retezat Mountains, Southern Carpathians, Romania

In the Retezat Mountains concentrations of O3, NO2 and SO2 in summer season 2000-2002 were low and below toxicity levels for forest trees. While NH3 concentrations were low in 2000, the 2001 and 2002 concentrations were elevated indicating possibility for increased N deposition to forest stands. More than 90% of the rain events were acidic with pH values <5.5, contributing to increased acidity of soils. Crown condition of Norway spruce (Picea abies) and European beech (Fagus sylvatica) was good, however, defoliation described as >25% of foliage injured increased from 9.1% in 2000 to 16.1% in 2002. Drought that occurred in the southern Carpathians between fall 2000 and summer 2002 and frequent acidic rainfalls could cause the observed decline of forest condition. Both Norway spruce and European beech with higher defoliation had lower annual radial increments compared to the trees with low defoliation. Ambient O3 levels found in the Retezat did not affect crown condition of Norway spruce or European beech.