The use of a sequential leaching procedure for assessing the heavy metal leachability in lime waste from the lime kiln at a caustizicing process of a pulp mill

A five-stage sequential leaching procedure was used to fractionate 13 heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Al, Ni, Co, As, V, Ba) and sulphur (S) in lime waste from the lime kiln at the causticizing plant of Stora Enso Oyj Veitsiluoto Pulp Mills at Kemi, Northern Finland, into the following fractions: (1) water-soluble fraction (H₂O), (2) exchangeable fraction (CH₃COOH), (3) easily reduced fraction (HONH₃Cl), (4) oxidizable fraction (H₂O₂ + CH₃COONH₄), and (5) residual fraction (HF + HNO₃ + HCl). Although metals were leachable in all fractions, the highest concentrations for most of the metals were observed in the residual fraction (stage 5). It was also notable that the total heavy metal concentrations in lime waste did not exceed the maximal allowable heavy metal concentrations for soil conditioner agents set by the ministry of the Agricultural and Forestry in Finland. The heavy metals concentrations in lime waste were also lower than the maximal allowable heavy metals concentrations of the European Union Directive 86/278/EEC on the protection of environment, and in particular of the soil, when sewage sludge is used in agriculture. The Ca concentration (420 g kg⁻¹; d.w.) was about 262 times higher than the typical value of 1.6 g kg⁻¹ (d.w.) in arable land in Central Finland. However, the concentration Mg (0.2 g kg⁻¹; d.w.) in lime waste was equal to the Mg concentration in arable land in the Central Finland. The lime waste has strongly alkaline pH (12.8) and a neutralizing value (i.e. liming effect) of 47.9% expressed as Ca equivalents (d.w.). This indicates lime waste to be a potential soil conditioner and improvement as well as a pH buffer.     

The use of a sequential leaching procedure for heavy metal fractionation in green liquor dregs from a causticizing process at a pulp mill

A five-stage sequential leaching procedure was used to fractionate heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Ni, Co, As, V, Ba and Ti) in green liquor dregs into the following fractions: (1) water-soluble fraction (H2O), (2) exchangeable fraction (CH3COOH), (3) easily reduced fraction (HONH3Cl), (4) oxidizable fraction (H2O2 + CH3COONH4), and (5) residual fraction (HF + HNO3 + HCl). The green liquor dregs were derived from a causticizing process at a pulp mill at Kemi, Northern Finland. According to the leaching studies, the leachability of heavy metals in the water-soluble fraction varied between 0.5 and 2 mg kg(-1) expressed on a dry weight (d.w.) basis, indicating relatively low bioavailability of the metals. However, the concentration of Mn (2065 mg kg(-1); d.w.) showed a strong and of Zn (17.6 mg kg(-1); d.w.), Ni (39.7 mg kg(-1); d.w.) and Ba (32.0 mg kg(-1); d.w.) slightly tendency to be extracted in the exchangeable fraction. In addition, Zn, Mn, Ni, Co, V and Ba showed clear leachability in the easily reduced fraction, as well as Cd, Cu, Cr, Zn, Mn, As and Ba in the oxidizable fraction. For Cd, Cu, Cr, Zn, Mn, Ni, Co, Ba and Ti, the sum of leachable heavy metal concentrations in fractions 1-5 agreed relatively well with the "total" heavy metal concentrations. Recoveries of the sum of fractions 1-5 were 84-56% of those obtained by the US EPA method 3052 (i.e. concentrations obtained after microwave oven digestion with a mixture of HF and HNO3).     

Investigation into qualitative discourses of the occupational safety and health inspectors in order to promote enforcement

The aim of this study is to conduct an ex-post evaluation of the OSH Enforcement Act. The focus of the study was to collate the views of occupational safety and health (OSH) inspectors on how the OSH Enforcement Act and the practices of the governmental OSH inspectorate operate from an effectiveness perspective. The questionnaire included open questions addressed to OSH inspectors. The results indicated that there is a tension between the quantitative performance targets, e.g., the number of inspections and the effectiveness of the practical enforcement work. Harmonizing the enforcement practices should be implemented at two levels: OSH local agencies and individual inspectors. OSH inspectors believe that developing the professional skills of OSH inspectors and the monitoring of OSH management systems are important ways of promoting the effectiveness of OSH enforcement.     

Application of a Screening Method in Assessing Occupational Safety and Health of Computer Workstations

Employers and workers need concrete guidance to plan and implement changes in the ergonomics of computer workstations. The Näppärä method is a screening tool for identifying problems requiring further assessment and corrective actions. The aim of this study was to assess the work of occupational safety and health (OSH) government inspectors who used Näppärä as part of their OSH enforcement inspections (430 assessments) related to computer work. The modifications in workstation ergonomics involved mainly adjustments to the screen, mouse, keyboard, forearm supports, and chair. One output of the assessment is an index indicating the percentage of compliance items. This method can be considered as exposure assessment and ergonomics intervention used as a benchmark for the level of ergonomics. Future research can examine whether the effectiveness of participatory ergonomics interventions should be investigated with Näppärä.     

Green liquor dregs as an alternative neutralizing agent at a pulp mill

Green liquor dregs is the biggest waste fraction at sulphate pulp mills. It is commonly landfilled. Here we demonstrate that the utilization of green liquor dregs as a neutralizing agent for acidic wastewaters is a potential alternative and an environmentally friendly method in contrast to its landfill disposal. The liming effect value of 39.6% for green liquor dregs, expressed as Ca equivalent, is similar to the liming effect value of 38% of a commercial limestone product. In addition, the pH value of 10.7 indicates a strong liming effect.     

A Device for Preventing Occupational Diseases of Lower Legs

Physiological processes characteristic of the fatigue of legs mainly appear when the worker’s activity requires standing. If the processes are intensive and regular, various diseases of legs, such as varicose veins and musculoskeletal disorders of legs and feet, can develop. Therefore, methods of reducing the fatigue of legs are important in occupational health protection. Air jet massage technology was developed and an appropriate massage device was built by the authors. The massage head turning around the lower leg and moving up and down gradually covers the leg’s surface. To determine the efficiency of the massage, fatigue processes were studied. These studies showed that jet massage effectively reduces both the subjective and objective fatigue symptoms. The device is convenient for use in industry, services, and at home.     

Results of Finnish national survey in the chemical industry on EU legislation concerned with risk assessment and safety compliance climate

A questionnaire study about the Finnish chemical industry was devised to explore the implementation of the risk assessment obligations of the EU Chemical Agents Directive (98/24/EC), and the role of risk assessment activities as a part of OSH management. The quantitative method involved an assessment of online questionnaire. The respondents were employers' (N = 49) and workers' (N = 105) OSH representatives from different companies'. The regression analysis of the responses indicated that prioritizations in the risk assessment had a highly significant (p < 0.001) effect both on the prevention measures in the management and on the safe use of chemicals. The present results showed that development measures have to be directed at the most important problems ensuring that sub-contractors carry out hazard identification and arranging their on-the-job training so that it matches the chemical plant enterprise's own workers. Furthermore, the results of risk assessment should be used in the planning and management of the work, in the development of the supervisors' leadership skills as well as when following up the improvements.     

Extractability of trace elements in precipitated calcium carbonate (PCC) waste from an integrated pulp and paper mill complex

From the utilization point of view, it is notable that the total element concentrations in the precipitated calcium carbonate (PCC) waste were significantly lower than the maximal allowable heavy metal concentrations for fertilizers used in agriculture and in forestry, set on the basis of the EU and Finnish legislation. The easily soluble Ca concentration of 168.5g kg(-1) (d.w.) in PCC waste was 105 times higher than the typical value of 1.6g kg(-1) (d.w.) in the coarse mineral soil in Finland indicates that the PCC waste is a potential agent for soil remediation and for improving soil fertility if it is used as fertilizer. According to a five-stage sequential extraction procedure, the highest concentrations of most of the elements occurred either in HF+HNO3+HCl or H2O2+CH3COONH4 fraction. This means that the major part of the elements retained in the PCC waste are not easy to extract (leach) under conditions normally found in nature. This is beneficial since, if inorganic materials and by-products are utilized in earth construction, the content of harmful compounds must be low and the harmful components must be tightly bound to the matrix.     

Chlorination of p-cymene by chlorine in carbon tetrachloride: Model compounds for environmental analyses

p-Cymene was chlorinated by chlorine in CCl₄. The products of the chlorination were separated by distillation and purified by preparative gas chromatography. The structures of chlorocompounds were confirmed by means of their NMR and mass spectra. The distillation gave as the main compounds: (2) 2-chloro-, (4) 2,3-dichloro-, (5) 2,5-dichloro-, (6) 2,3,6-trichloro-, (7) 2,3,5,6-tetrachloro-p-cymenes and as by-products: (8) 2,5,7-trichloro-p-cymene, (9) 2,6-dichloro-1-methyl-4-(1-methylethenyl)benzene (cymenene), and (10) 2,3,6-trichloro-1-methyl-4-(1-methylethenyl)benzene (cymenene).     

Chemical sequential extraction of heavy metals and sulphur in bottom ash and in fly ash from a pulp and paper mill complex

A five-stage sequential extraction procedure was used to determine the distribution of 11 metals (Cd, Cr, Cu, Mo, Pb, Zn, As, Co, V, Ni, Ba), and sulphur (S) in bottom ash and in fly ash from a fluidized bed co-combustion (i.e. wood and peat) boiler of Stora Enso Oyj Oulu Mill at Oulu, Northern Finland, into the following fractions: (1) water-soluble fraction (H2O); (2) exchangeable fraction (CH3COOH); (3) easily reduced fraction (NH2OH-HCl); (4) oxidizable fraction (H2O2 + CH3COONH4); and (5) residual fraction (HF + HNO3 + HCl). Although metals were extractable in all fractions, the highest concentrations of most of the metals occurred in the residual fraction. From the environmental point of view, this fraction is the non-mobile fraction and is potentially the least harmful. The Ca concentrations of 29.3 g kg(-1) (dry weight) in bottom ash and of 68.5 g kg(-1) (dry weight) in fly ash were correspondingly approximately 18 and 43 times higher than the average value of 1.6 g kg(-1) (dry weight) in arable land in Central Finland. The ashes were strongly alkaline pH (approximately 12) and had a liming effects of 9.3% (bottom ash) and 13% (fly ash) expressed as Ca equivalents (dry weight). The elevated Ca concentrations indicate that the ashes are potential agents for soil remediation and for improving soil fertility. The pH and liming effect values indicate that the ashes also have a pH buffering capacity. From the environmental point of view, it is notable that the heavy metal concentrations in both types of ash were lower than the Finnish criteria for ash utilization.