Automated energy management in distributed electricity systems: An EEPOS approach

The increasing capacity of distributed electricity generation brings new challenges in maintaining a high security and quality of electricity supply. New techniques are required for grid support and power balance. The highest potential for these techniques is to be found on the part of the electricity distribution grid.

This article addresses this potential and presents the EEPOS project’s approach to the automated management of flexible electrical loads in neighborhoods. The management goals are (i) maximum utilization of distributed generation in the local grid, (ii) peak load shaving/congestion management, and (iii) reduction of electricity distribution losses. Contribution to the power balance is considered by applying two-tariff pricing for electricity.

The presented approach to energy management is tested in a hypothetical sensitivity analysis of a distribution feeder with 10 households and 10 photovoltaic (PV) plants with an average daily consumption of electricity of 4.54 kWh per household and a peak PV panel output of 0.38 kW per plant. Energy management shows efficient performance at relatively low capacities of flexible load. At a flexible load capacity of 2.5% (of the average daily electricity consumption), PV generation surplus is compensated by 34–100% depending on solar irradiance. Peak load is reduced by 30% on average. The article also presents the load shifting effect on electricity distribution losses and electricity costs for the grid user.     

Multi-elemental EDXRF mapping of polluted soil from former horticultural land

The distribution of major and trace elements was systematically investigated by use of energy dispersive X-ray fluorescence spectrometry (EDXRF) on a former horticultural soil. The purpose of the study was to combine mapping of soil element concentration levels with multivariate statistics for characterisation of soil metal pollution in relation to previous and present land use. A 1-ha study site was chosen from a former horticulture where a previous preliminary survey indicated increased concentration levels of toxic elements. The soil was sampled from the top 20 cm of the soil surface in a 10 x 10-m grid-like pattern covering the 1-ha study area. In addition, three soil profiles were studied. The elemental composition of the soil samples was investigated by EDXRF while the composition of aqueous soil extracts was determined by total reflection X-ray fluorescence spectrometry (TXRF). Based on mapping and multivariate statistically analysis of the data obtained by EDXRF, most elements were found in almost constant concentration levels in the top soil throughout the investigated site. However, the contents of the toxic elements Zn, Cu, As, and Pb were found to vary significantly within the area. Hence, the samples with high accumulations of As also contained relatively high amounts of Zn, Cu, and Pb, which indicates that toxic-element-containing pesticides have been applied to the soil surface in the area of the former green houses at the study site. The Pb/As mass ratio in the soil indicates that PbHAsO3 was the preferential lead arsenate used for pest management at the investigated site, while Cu as Bordeaux liquid (CuSO4) and Zn were applied to minimize the leaf damaging effect from the former compounds. Calculations indicated that As annually was applied to the soil in the former greenhouses in doses up to 4 kg As/ha while Pb had been annually applied in doses up to 12 kg Pb/ha. The enrichment of Zn, Cu, As and Pb was greatest in the top 20 cm of the soil and no anthropogenic enrichment of these elements occurred below a depth of 50 cm, indicating that the toxic elements are rather immobile in this soil. The results of this investigation suggest that EDXRF used in combination with multivariate statistics is a strong tool for multi-element mapping of elemental contents, sources and mobility in the terrestrial environment.     

Arsenic removal using natural biomaterial-based sorbents

Arsenic contamination of water is a major problem worldwide. A possible solution can be approached through developing new sorbents based on cost-effective and environmentally friendly natural biomaterials. We have developed new sorbents based on biomaterial impregnation with iron oxyhydroxide. In this study, raw peat material, iron-modified peat, iron-modified biomass (shingles, straw, sands, cane and moss) as well as iron humate were used for the removal of arsenate from contaminated water. The highest sorption capacity was observed in iron-modified peat, and kinetic studies indicated that the amount of arsenic sorbed on this material exceeds 90 % in 5 h. Arsenate sorption on iron-modified peat is characterised by the pseudo-second-order mechanism. The results of arsenic sorption in the presence of competing substances indicated that sulphate, nitrate, chloride and tartrate anions have practically no influence on As(V) sorption onto Fe-modified peat, whereas the presence of phosphate ions and humic acid significantly lowers the arsenic removal efficiency.     

Research review trends of food analysis in Latvia: major and trace element content

The current paper involves overview of several studies concerning quantitative major and trace element analysis of different food samples, such as products of plant origin, e.g., locally grown vegetables (carrots, onions, potatoes) and products of animal origin derived with or without processing (cottage cheese, eggs, honey). Food samples were collected over the territory of Latvia in the time period 2009–2012. Sample pre-treatment was chosen according to the product specifics but mostly wet mineralization with concentrated nitric acid was applied. Analysis of major elements (e.g., Ca, Fe, K, Mg, Na) and trace elements (e.g., As, Cd, Co, Cr, Cu, Ni, Pb, Se, Zn) was performed by appropriate quantitative analytical technique: atomic absorption spectrometry, inductively coupled plasma mass spectrometry or total reflection X-ray fluorescence spectrometry. Not only the influence of environmental factors (e.g., geographical or seasonal impact) was detected in element dissemination in food, also botanical origin (if applicable) and applied agricultural praxis, product processing and storage specifics were found to be important. Possible food contamination by potentially toxic elements can be associated mostly with the consequences of anthropogenic activities. The studies revealed the significance of food research in the context of environmental science.     

A European supergrid for renewable energy: local impacts and far-reaching challenges

This article assesses the impact of extensive deployment of indigenous and external renewable energy sources on a local electricity system (Sardinia Island) and discusses the main challenges faced by the European power grids in integrating high shares of renewable-based generation technologies. It presents the 2030 scenarios for the Sardinian power system and the results of steady-state analyses in extreme (renewable) generation and consumption conditions. These results are eventually combined with the assessment of key technology development trends to explain how this can affect the development of a European supergrid. In general, the article stresses that rendering the bulk-power system capable of accommodating high renewable energy penetration not only requires reinforcing the electricity highways but also demands carefully planning the architecture of and the interface with regional power systems.