The interaction between physical and social-psychological factors in indoor environmental health

Indoor environmental health is now recognized as an important factor in preventing respiratory health problems in the United States. It is also a concern in Canada due to the amount of time that Canadians spend indoors because of cold weather and the potential for increased time indoors during the summer if theclimate warms. The negative health effects are often labeled assick building syndrome, but diagnosing a building or itsoccupants as sick is complicated by the variety of symptoms, thepresence of chronic versus acute symptoms and social andpsychological (socio-psychological) factors that may reduce theeffectiveness of an engineering solution. As a case study, thecontribution of various factors to indoor environmental health,in three buildings at the University of Toronto, was examinedusing five different methods. The results indicate that theinhabitants of the buildings consider features other than airquality in considering building health such as design,maintenance, funding cuts and socio-psychological factors.     

Connecting the dots: mapping habitat connectivity for tigers in central India

Large connected landscapes are paramount to maintain top predator populations. Across their range, tiger (Panthera tigris) populations occur in small fragmented patches of habitat, often isolated by large distances in human-dominated landscapes. We assessed connectivity between 16 protected areas (PAs) in central India, a global priority landscape for tiger conservation, using data on land use and land cover, human population density, and transportation infrastructure. We identified and prioritized movement routes using a combination of least-cost corridor modeling and circuit theory. Our analyses suggest that there are several opportunities to maintain connectivity in this landscape. We mapped a total of thirty-five linkages in the region and calculated metrics to estimate their quality and importance. The highest quality linkages as measured by the ratio of cost-weighted distance to Euclidean distance are Kanha–Phen/Bandhavgarh–SanjayGhasidas/Melghat–Satpura, and cost-weighted distance to least-cost path length are Nawegaon–Tadoba/Achanakmar–SanjayGhasidas/Kanha–Phen. We used current flow centrality to evaluate the contribution of each PA and linkage toward facilitating animal movement. Values are highest for Kanha and Pench tiger reserves, and the linkages between Kanha–Phen, Kanha–Pench, and Pench–Satpura, suggesting that these PAs and linkages play a critical role in maintaining connectivity in central India. In addition, smaller areas such as Bor, Nawegaon, and Phen have high centrality scores relative to their areas and thus may act as important stepping stones. We mapped pinch points, which are sections of the linkages where tiger movement is restricted due to unfavorable habitat, transportation networks, human habitation, or a combination of factors. Currently, very limited data exist on tiger movement outside of PAs to validate model results. Regional-scale connectivity mapping efforts can assist managers and policy makers to develop strategic plans for balancing wildlife conservation and other land uses in the landscape.     

Phytoremediation of a Petroleum‐Hydrocarbon Contaminated Shallow Aquifer in Elizabeth City,North Carolina,USA

A former bulk fuel terminal in North Carolina is a groundwater phytoremediation demonstration site where 3,250 hybrid poplars, willows, and pine trees were planted from 2006 to 2008 over approximately 579,000 L of residual gasoline, diesel, and jet fuel. Since 2011, the groundwater altitude is lower in the area with trees than outside the planted area. Soil‐gas analyses showed a 95 percent mass loss for total petroleum hydrocarbons (TPH) and a 99 percent mass loss for benzene, toluene, ethylbenzene, and xylenes (BTEX). BTEX and methyl tert‐butyl ether concentrations have decreased in groundwater. Interpolations of free‐phase, fuel product gauging data show reduced thicknesses across the site and pooling of fuel product where poplar biomass is greatest. Isolated clusters of tree mortalities have persisted in areas with high TPH and BTEX mass. Toxicity assays showed impaired water use for willows and poplars exposed to the site's fuel product, but Populus survival was higher than the willows or pines on‐site, even in a noncontaminated control area. All four Populus clones survived well at the site. © 2014 Wiley Periodicals, Inc.*     

Development of a biaxial loading frame for sheet metal

Characterization of the evolving yield loci and forming limit diagrams for sheet materials under biaxial loading is necessary for the development of accurate sheet metal forming process simulations. Biaxial tension testing has been shown to have significant advantages over the current computational and experimental methods for such material characterization; however, the few commercially available loading frames are far too large and expensive to be practical for most metal forming research laboratories. In this paper, the design of a practical servohydraulic biaxial loading frame is presented. The design, control, and operation of the loading frame are discussed in detail, and experimental data is provided to validate the effectiveness of the control system with respect to specimen center shifting.     

Mold spore penetration through wall service outlets: a pilot study

A pilot study was conducted to estimate fungal spore penetration for wall service outlets subjected to a constant air pressure. During the laboratory experiment, a wall chamber was fabricated, and telephone, electrical, and cable service outlets were installed. Penicillium chrysogenum spores were aerosolized into the chamber that was held under pressure. Spores that penetrated the outlets were funneled into an impinger for microscopic enumeration. Thirty trials were conducted for each of the five outlets (N?= 150), and the wall chamber was decontaminated between trials. Results of an analysis of variance suggest wall service outlets allow spore penetration. The penetration factor for the telephone outlet was significantly greater than all other outlets (p?< 0.05), and there was no difference in penetration between electrical outlets with and without plugs. Penetration factor differences were attributed to air leakage rates across the outlets. Due to the experimental design and equipment limitations, further research is needed to support these findings.     

Evaluation of catalyzed and electrically heated filters for removal of particulate emissions from diesel-A- and JP-8-fueled engines

In-service diesel engines are a significant source of particulate matter (PM) emissions, and they have been subjected to increasingly strict emissions standards. Consequently, the wide-scale use of some type of particulate filter is expected. This study evaluated the effect of an Engelhard catalyzed soot filter (CSF) and a Rypos electrically heated soot filter on the emissions from in-service diesel engines in terms of PM mass, black carbon concentration, particle-bound polycyclic aromatic hydrocarbon concentration, and size distribution. Both filters capture PM. The CSF relies on the engine's exhaust to reach the catalyst regeneration temperature and oxidize soot, whereas the electrically heated filter contains a heating element to oxidize soot. The filters were installed on several military diesel engines. Particle concentrations and compositions were measured before and after installation of the filter and again after several months of operation. Generally, the CSF removed at least 90% of total PM, and the removal efficiency improved or remained constant after several months of operation. In contrast, the electrical filters removed 44-69% of PM mass. In addition to evaluating the soot filters, the sampling team also compared the results of several real-time particle measurement instruments to traditional filter measurements of total mass.     

Avian and Mammalian Translocations: Update and Reanalysis of 1987 Survey Data

In 1993 we conducted a follow-up study of the 1987 survey by Griffith et al. (1989) of 421 avian and mammalian translocation programs in North America, Australia, and New Zealand to reassess the programs' status and the biological and methodological factors associated with success. Our survey response rate was 81%. Approximately 38% of usable programs in 1993 reported a change in outcome from 1987 (e.g., a translocated population was "declining" but now is "self-sustaining"), but the difference between the overall success rates was not statistically significant (66% in 1987 and 67% in 1993). Since 1987, an increase was observed in the median number of animals translocated per program (31.5 to 50.5), median duration of releases (2 to 3 years), and proportion of programs releasing more than 30 animals (46% to 68%). Multiple logistic regression analyses indicated that release into the core of the historical range, good-to-excellent habitat quality, native game species, greater numbers of released animals, and an omnivorous diet were positively associated with translocation success. Moreover, our results indicate that translocated birds were less successful at establishing self-sustaining populations than translocated mammals. Our findings, using comparable logistic analyses, generally corroborate the results of Grifftth et al. (1989). Variables not found to be significantly correlated with translocation success include species' reproductive potential (number of offspring and first age of reproduction), number and duration of the releases, and source of the translocated animals (wild-caught versus captive-reared).     

Metal equilibration in laboratory-contaminated (spiked) sediments used for the development of whole-sediment toxicity tests

The equilibration and bioavailability of metals in laboratory-contaminated sediments have been investigated in order to provide better guidance on acceptable procedures for spiking sediments with metals for use in the development of whole-sediment toxicity tests. The equilibration rates of Cd, Cu, Ni and Zn spiked into three estuarine surface sediments with varying properties were investigated. Changes to sediment pH, redox potential, porewater and acid-soluble metals, acid-volatile sulfide and bacterial activity during equilibration, effects of temperature and disturbances following equilibration are reported. The addition of metals to sediments caused major decreases in pH and increases in redox potential as metals displaced iron(II) into the porewaters and added metals and iron (following oxidation) were hydrolyzed. The rates of equilibration of metals in porewaters varied considerably and were dependent on sediment and metal properties. For the oxic/sub-oxic sediments studied, metal-spikes of Cd, Cu, Ni and Zn appeared near equilibrium after 25-45, 10-15, 30-70 and 20-40 days, respectively. Acid-soluble metal concentrations decreased during the equilibration period indicating that the metals become more strongly associated with the sediments with time (less bioavailable). Bacterial activity was greatest in the sediment equilibrated at pH 7 and decreased following the addition of metals. During the equilibration period, bacterial activity increased in sediments equilibrated at pH 6, remained low in sediments at pH 8 and varied erratically in sediments at pH 7. Spiked sediments were shown to equilibrate more slowly at lower temperatures resulting in high porewater metal concentrations. Disturbances to equilibrated sediments because of sample manipulation caused significant iron(II) oxidation and losses of metals from porewaters. The importance of documenting spiking and equilibration procedures and carefully measuring and reporting sediment parameters is highlighted so that contaminant bioavailability and exposure pathways can be interpreted and organism sensitivity accurately determined. Recommendations are given for the preparation of metal-spiked sediments for toxicity testing purposes.