Characterization of industrial aqueous discharges by the TLC/Ames’ assay

The $\text{in situ}$ detection of mutagens by the TLC/Ames’ assay has been applied to aqueous discharges from a textile plant. The samples were fractionated in acid/neutral and basic fractions which subsequently were subject to the TLC/Ames’ test. The results demonstrate the presence of a number of both direct and indirect mutagens in the waste water. The chemical properties of these compounds are discussed in light of their chromatographic behaviour. The applicability of this method for characterizing mutagens in complex mixtures is demonstrated.     

Metal mixtures in pregnant women and umbilical cord blood at urban populations—Rio de Janeiro,Brazil

Environmental Science and Pollution Research - This study aims to assess interrelationships between serum lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) concentrations in pregnant women in...     

Effects of feeding time and organic loading in an anaerobic sequencing batch biofilm reactor (ASBBR) treating diluted whey

An investigation was carried out on the performance of an anaerobic sequencing batch biofilm reactor (ASBBR) treating diluted cheese whey when submitted to different feed strategies and volumetric organic loads (VOL). Polyurethane foam cubes were used as support for biomass immobilization and stirring was provided by helix impellers. The reactor with a working volume of 3 L treated 2 L of wastewater in 8-h cycles at 500 rpm and 30 degrees C. The organic loads applied were 2, 4, 8 and 12 g COD L(-1) d(-1), obtained by increasing the feed concentration. Alkalinity was supplemented at a ratio of 50% NaHCO(3)/COD. For each organic load applied three feed strategies were tested: (a) batch operation with 8-h cycle; (b) 2-h fed-batch operation followed by 6-h batch; and (c) 4-h fed-batch followed by 4-h batch. The 2-h fed-batch operation followed by 6-h batch presented the best results for the organic loads of 2 and 4 g COD L(-1) d(-1), whereas the 4-h fed-batch operation followed by 4-h batch presented results slightly inferior for the same organic loads and the best results at organic loads of 8 and 12 g COD L(-1) d(-1). The concentration of total volatile acids varied with fill time. For the higher fill times maximum concentrations were obtained at the end of the cycle. Moreover, no significant difference was detected in the maximum concentration of total volatile acids for any of the investigated conditions. However, the maximum values of propionic acid tended to decrease with increasing fill time considering the same organic load. Microbiological analyses revealed the presence of Methanosaeta-like structures and methanogenic hydrogenotrophic-like fluorescent bacilli. No Methanosarcina-like structures were observed in the samples.