Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

The study of age influence on human bone lead metabolism by using a simplified model and X-ray fluorescence data

Long term lead metabolism in the human body has never been fully understood due to the lack of human data in this area. The technological improvement of bone lead measurement systems has made bone lead data of substantial populations available. In this study, a set of X-ray fluorescence bone lead data was used to test Leggett's lead metabolism model (R. W. Leggett, Environ. Health Perspect., 1993a, 101, 598-616), especially the model of metabolism in bone. The data set includes the bone lead concentration of 539 occupationally exposed workers, of whom 327 were measured twice in five years. The bone lead concentrations of both cortical bone (tibia) and trabecular bone (calcaneus) were obtained by Cd-109 gamma-ray induced XRF measurement. The histories of blood lead concentration for these workers were used to regulate the input file of the model. The results show that the bone lead concentrations predicted by Leggett's model greatly underestimate the measured values, especially for older workers. This data set was then organized into five age groups. A new simplified model was applied to estimate the lead transfer rates between blood and lead compartments for these age groups. The original transfer rates and the new transfer rates are compared, and the differences are discussed. When the transfer rates derived from measured bone lead data were put into the input file of the model to replace the existing parameters, the predicted values were much closer to the measured values for both cortical bone and trabecular bone.     

Environmental cost of using poor decision metrics to prioritize environmental projects

Conservation decision makers commonly use project‐scoring metrics that are inconsistent with theory on optimal ranking of projects. As a result, there may often be a loss of environmental benefits. We estimated the magnitudes of these losses for various metrics that deviate from theory in ways that are common in practice. These metrics included cases where relevant variables were omitted from the benefits metric, project costs were omitted, and benefits were calculated using a faulty functional form. We estimated distributions of parameters from 129 environmental projects from Australia, New Zealand, and Italy for which detailed analyses had been completed previously. The cost of using poor prioritization metrics (in terms of lost environmental values) was often high—up to 80% in the scenarios we examined. The cost in percentage terms was greater when the budget was smaller. The most costly errors were omitting information about environmental values (up to 31% loss of environmental values), omitting project costs (up to 35% loss), omitting the effectiveness of management actions (up to 9% loss), and using a weighted‐additive decision metric for variables that should be multiplied (up to 23% loss). The latter 3 are errors that occur commonly in real‐world decision metrics, in combination often reducing potential benefits from conservation investments by 30–50%. Uncertainty about parameter values also reduced the benefits from investments in conservation projects but often not by as much as faulty prioritization metrics.     

Investigating the link between $$\hbox {PM}_{2.5}$$ and atmospheric profile variables via penalized functional quantile regression

Fine particulate matter (\(\hbox {PM}_{2.5}\)) events negatively affect the health of numerous persons globally each year. Previous works have described the association between air pollution and surface-level meteorological conditions; however, there has been less focus on the task of linking air pollution events with meteorological conditions at higher levels of the atmosphere. Working within the functional data framework, we develop a penalized functional quantile regression (PFQR) procedure to model conditional quantiles of a continuous response based on a functional covariate, with the ability to penalize selected derivatives of the estimated coefficient function. Our aim is to investigate the relationship between atmospheric profile variables (APVs), assumed to be functional, and key quantiles of the conditional distribution of surface-level \(\hbox {PM}_{2.5}\). Via a simulation study, we find that the performance of our PFQR procedure compares favorably to other related approaches. We conclude with an analysis of \(\hbox {PM}_{2.5}\) data at two Southeastern US locations, Columbia, SC and Tampa, FL, where we estimate the coefficient functions for the APVs corresponding to both ‘typical’ and ‘high’ \(\hbox {PM}_{2.5}\) events. As we believe that the true coefficient functions are smooth and may be exactly zero over subsets of their domains, we impose penalties on the 0th and 2nd derivatives. Our analysis indicates that the corresponding atmospheric conditions differ between the two locations, and that the conditions differ seasonally within location.     

Acid sulfate soils and human health—A Millennium Ecosystem Assessment

Acid sulfate soils have been described as the “nastiest soils on earth” because of their strong acidity, increased mobility of potentially toxic elements and limited bioavailability of nutrients. They only cover a small area of the world's total problem soils, but often have significant adverse effects on agriculture, aquaculture and the environment on a local scale. Their location often coincides with high population density areas along the coasts of many developing countries. As a result, their negative impacts on ecosystems can have serious implications to those least equipped for coping with the low crop yields and reduced water quality that can result from acid sulfate soil disturbance. The Millennium Ecosystem Assessment called on by the United Nations in 2000 emphasised the importance of ecosystems for human health and well-being. These include the service they provide as sources of food and water, through the control of pollution and disease, as well as for the cultural services ecosystems provide. While the problems related to agriculture, aquaculture and the environment have been the focus of many acid sulfate soil management efforts, the connection to human health has largely been ignored. This paper presents the potential health issues of acid sulfate soils, in relation to the ecosystem services identified in the Millennium Ecosystem Assessment. It is recognised that significant implications on food security and livelihood can result, as well as on community cohesiveness and the spread of vector-borne disease. However, the connection between these outcomes and acid sulfate soils is often not obvious and it is therefore argued that the impact of such soils on human well-being needs to be recognised in order to raise awareness among the public and decision makers, to in turn facilitate proper management and avoid potential human ill-health.     

A Global Analysis of Protected Area Management Effectiveness

We compiled details of over 8000 assessments of protected area management effectiveness across the world and developed a method for analyzing results across diverse assessment methodologies and indicators. Data was compiled and analyzed for over 4000 of these sites. Management of these protected areas varied from weak to effective, with about 40% showing major deficiencies. About 14% of the surveyed areas showed significant deficiencies across many management effectiveness indicators and hence lacked basic requirements to operate effectively. Strongest management factors recorded on average related to establishment of protected areas (legal establishment, design, legislation and boundary marking) and to effectiveness of governance; while the weakest aspects of management included community benefit programs, resourcing (funding reliability and adequacy, staff numbers and facility and equipment maintenance) and management effectiveness evaluation. Estimations of management outcomes, including both environmental values conservation and impact on communities, were positive. We conclude that in spite of inadequate funding and management process, there are indications that protected areas are contributing to biodiversity conservation and community well-being.     

Organochlorine pesticides in soils of Mexico and the potential for soil-air exchange

The spatial distribution of organochlorine pesticides (OCs) in soils and their potential for soil-air exchange was examined. The most prominent OCs were the DDTs (Geometric Mean, GM = 1.6 ng g⁻¹), endosulfans (0.16 ng g⁻¹), and toxaphenes (0.64 ng g⁻¹). DDTs in soils of southern Mexico showed fresher signatures with higher F_DDTe = p,p′-DDT/(p,p′-DDT + p,p′-DDE) and more racemic o,p′-DDT, while the signatures in the central and northern part of Mexico were more indicative of aged residues. Soil-air fugacity fractions showed that some soils are net recipients of DDTs from the atmosphere, while other soils are net sources. Toxaphene profiles in soils and air showed depletion of Parlar 39 and 42 which suggests that soil is the source to the atmosphere. Endosulfan was undergoing net deposition at most sites as it is a currently used pesticide. Other OCs showed wide variability in fugacity, suggesting a mix of net deposition and volatilization.     

Concentrations of polybrominated diphenyl ethers (PBDEs) in matched samples of human milk,dust and indoor air

Polybrominated diphenyl ethers (PBDEs) are lipophilic, persistent pollutants found worldwide in environmental and human samples. Exposure pathways for PBDEs remain unclear but may include food, air and dust. The aim of this study was to conduct an integrated assessment of PBDE exposure and human body burden using 10 matched samples of human milk, indoor air and dust collected in 2007–2008 in Brisbane, Australia. In addition, temporal analysis was investigated comparing the results of the current study with PBDE concentrations in human milk collected in 2002–2003 from the same region.PBDEs were detected in all matrices and the median concentrations of BDEs -47 and -209 in human milk, air and dust were: 4.2 and 0.3 ng/g lipid; 25 and 7.8 pg/m³; and 56 and 291 ng/g dust, respectively. Significant correlations were observed between the concentrations of BDE-99 in air and human milk (r = 0.661, p = 0.038) and BDE-153 in dust and BDE-183 in human milk (r = 0.697, p = 0.025). These correlations do not suggest causal relationships — there is no hypothesis that can be offered to explain why BDE-153 in dust and BDE-183 in milk are correlated. The fact that so few correlations were found in the data could be a function of the small sample size, or because additional factors, such as sources of exposure not considered or measured in the study, might be important in explaining exposure to PBDEs. There was a slight decrease in PBDE concentrations from 2002–2003 to 2007–2008 but this may be due to sampling and analytical differences. Overall, average PBDE concentrations from these individual samples were similar to results from pooled human milk collected in Brisbane in 2002–2003 indicating that pooling may be an efficient, cost-effective strategy of assessing PBDE concentrations on a population basis.The results of this study were used to estimate an infant's daily PBDE intake via inhalation, dust ingestion and human milk consumption. Differences in PBDE intake of individual congeners from the different matrices were observed. Specifically, as the level of bromination increased, the contribution of PBDE intake decreased via human milk and increased via dust. As the impacts of the ban of the lower brominated (penta- and octa-BDE) products become evident, an increased use of the higher brominated deca-BDE product may result in dust making a greater contribution to infant exposure than it does currently.To better understand human body burden, further research is required into the sources and exposure pathways of PBDEs and metabolic differences influencing an individual's response to exposure. In addition, temporal trend analysis is necessary with continued monitoring of PBDEs in the human population as well as in the suggested exposure matrices of food, dust and air.     

Group utility indifference and resource management decision making

Natural resource managers often rely on the advice of specialists to aid decision making. However, disagreement among these specialists about the relative value of particular management objectives or the risks associated with implementing certain management strategies may complicate the decision effort. Multiattribute utility analysis can facilitate decision making by indicating how attributes of a problem are weighed by individual specialists. This information can then be used to outline bands of potential problem solutions that are acceptable to the advising group and may allow management to further its own objectives (possibly increased efficiency).An example is presented that relates to fire management planning efforts on national forests. Multiattribute utility functions developed from a survey of fire management professionals are used to identify utility-maximizing fire management strategies based on each strategy's level of economic efficiency and risk. Bands of utility-indifferent potential solutions are outlined based on measures of group consensus. It is pointed out that a subset of these would further management's goal (increased efficiency) without significantly altering the value assigned to the risk attribute by the specialists. Finally, the robustness of the technique is discussed with particular reference to environmental management problems and the role that proxy information often plays in decision making.     

Modelling the resilience of Australian savanna systems to grazing impacts.

Savannas occur across all of northern Australia and are extensively used as rangelands. A recent surge in live cattle exports to Southeast Asia has caused excessive grazing impacts in some areas, especially near watering points. An important ecological and management question is "how resilient are savanna ecosystems to grazing disturbances?" Resilience refers to the ability of an ecosystem to remain in its current state (resist change) and return to this state (recover) if disturbed. Resilience responses can be measured using field data. These responses can then be modelled to predict the likely resistance and recovery of savannas to grazing impacts occurring under different climatic conditions. Two approaches were used to model resilience responses. First, a relatively simple mathematical model based on a sigmoid response function was used. This model proved useful for comparing the relative resilience of different savanna ecosystems, but was limited to ecosystems and conditions for which data were available. Second, a complex process model, SAVANNA, was parameterised to simulate the structure and function of Australian savannas. Simulations were run for 50 years at two levels of grazing to evaluate resistance and then for another 50 years with no grazing to evaluate recovery. These runs predicted that savanna grasslands were more resistant to grazing (changed less) than red-loam woodlands, which recovered relatively slowly from grazing impacts. The SAVANNA model also predicted that these woodlands would recover slightly slower under the climate change scenario projected for northern Australia.