Implementation of a windblown dust parameterization into MODELS-3/CMAQ: Application to episodic PM events in the US/Mexico border

Windblown dust is known to impede visibility, deteriorate air quality and modify the radiation budget. Arid and semiarid areas with unpaved and unvegetated land cover are particularly prone to windblown dust, which is often attributed to high particulate matter (PM) pollution in such areas. Yet, windblown dust is poorly represented in existing regulatory air quality models. In a study by the authors on modeling episodic high PM events along the US/Mexico border using the state-of-the-art CMAQ/MM5/SMOKE air quality modeling system [Choi, Y.-J., Hyde, P., Fernando, H.J.S., 2006. Modeling of episodic particulate matter events using a 3D air quality model with fine grid: applications to a pair of cities in the US/Mexico border. Atmospheric Environment 40, 5181–5201], some of the observed PM₁₀ NAAQS exceedances were inferred as due to windblown dust, but the modeling system was incapable of dealing with time-dependent episodic dust entrainment during high wind periods. In this paper, a time-dependent entrainment parameterization for windblown dust is implemented in the CMAQ/MM5/SMOKE modeling system with the hope of improving PM predictions. An approach for realizing windblown dust emission flux for each grid cell over the study domain on an hourly basis, which accounts for the influence of factors such as soil moisture content, atmospheric stability and wind speed, is presented in detail. Comparison of model predictions with observational data taken at a pair of US/Mexico border towns shows a clear improvement of model performance upon implementation of the dust emission flux parameterization.     

Distribution of genetic elements associated with antibiotic resistance in treated and untreated animal husbandry waste and wastewater

Environmental Science and Pollution Research - Animal breeding for meat production based on swine, cattle, poultry, and aquaculture is an activity that generates several impacts on the environment,...     

Simultaneous removal of metronidazole and Pb(II) from aqueous solution onto bifunctional activated carbons

Environmental Science and Pollution Research - In this work, it was analyzed the behavior of three commercial activated carbons with different textural and chemical properties to adsorb...     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

Prediction models of CO, SPM and SO2 concentrations in the Campo de Gibraltar Region, Spain: a multiple comparison strategy

The 'Campo de Gibraltar' region is a very industrialized area where very few air pollution studies have been carried out. Up to date, no model has been developed in order to predict air pollutant levels in the different towns spread in the region. Carbon monoxide (CO), Sulphur dioxide (SO(2)) and suspended particulate matter (SPM) series have been investigated (years 1999-2000-2001). Multilayer perceptron models (MLPs) with backpropagation learning rule have been used. A resampling strategy with two-fold crossvalidation allowed the statistical comparison of the different models considered in this study. Artificial neural networks (ANN) models were compared with Persistence and ARIMA models and also with models based on standard Multiple Linear Regression (MLR) over test sets with data that had not been used in the training stage. The models based on ANNs showed better capability of generalization than those based on MLR. The designed procedure of random resampling permits an adequate and robust multiple comparison of the tested models. Principal component analysis (PCA) is used to reduce the dimensionality of data and to transform exogenous variables into significant and independent components. Short-term predictions were better than medium-term predictions in the case of CO and SO(2) series. Conversely, medium-term predictions were better in the case of SPM concentrations. The predictions are significantly promising (e.g., d (SPM 24-ahead) = 0.906, d (CO 1-ahead) = 0.891, d (SO2 1-ahead) = 0.851).     

Oxidation of trichloroethene over metal oxide catalysts: kinetic studies and correlation with adsorption properties

The performance of bulk chromium oxide is compared with that of a Mn commercial catalyst for the deep oxidation of trichloroethene (1000-2500ppmv, 55h(-1) space velocity) in air, in dry and wet (20000ppm of H(2)O) conditions, in terms of activity, selectivity and stability. Chromium oxide was found to be more active (on a catalyst weight basis), however its activity decreases continuously with time on stream. The presence of water increases its stability, the Mn catalyst showing the opposite behaviour. The effect of water on the Cr catalyst can be explained according to the Deacon equilibrium, as the presence of water tends to decrease the Cl(2) concentration, assumed to be responsible of the catalyst deactivation. Regarding to the selectivity, the Mn catalyst yields C(2)Cl(4), CCl(4) and CHCl(3) as organochlorinated by-products, whereas chromium oxide produces only trace amounts of CCl(4). Simple power-law kinetics expressions (first-order for Mn and zero-order for Cr) provide fairly good fits for the evolution of the conversion with the temperature. Furthermore, the kinetic behaviour of chromium oxide can be represented with a Langmuir-Hinshelwood model taking into account the chlorine inhibitory effect.     

Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data acquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1-200 microg/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 microg/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 mu g/flower and 60 mu g/flower for cv "Extazy" and cv "reina de corazones" watermelons, respectively). One month after treatment, 20 "Extazy" watermelon units (1.5-2 kg/unit) and 20 "Reina de corazones" watermelon units (4-5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 microg/kg.     

Groundwater contamination evolution in the Guadiamar and Agrio aquifers after the Aznalcóllar spill: assessment and environmental implications

In 1998, the Agrio and Guadiamar rivers underwent an enormous environmental disaster caused by the rupture of the Aznalcóllar tailings dam and the release of 6 hm³ of pyrite sludge and acidic water. Both rivers run over recent alluvial materials which form a small-sized aquifer which is however important because underground water feeds the flow of the rivers. This work analyzes the state of groundwater 10 years after the spill. Before the dam failure, this aquifer was already contaminated in the zone nearest to the mine, to which the impact of the spill was added. Contamination levels in the alluvial aquifer of the Agrio River have decreased remarkably. However, they are still important, with acidic pH values and high concentrations of toxic elements (maximum values of 16 mg/L of Zn and 15 mg/L of Al). There are also important levels of contamination in the Guadiamar alluvial area closest to the mine, as well as in specific zones located further south. The concentration of toxic elements is mainly controlled by pH. The evolution of contaminant levels show a sharp decrease after the first years following the spill, followed by a subsequent stabilization. It is necessary to take measures for the recovery of the aquifer because, otherwise, groundwater will continue contributing contaminants into the Agrio and Guadiamar rivers.     

DDT, DDE, and 1-hydroxypyrene levels in children (in blood and urine samples) from Chiapas and Oaxaca, Mexico

The aim of this study was to evaluate the DDT, DDE, and 1-hydroxypyrene exposure levels of children living in communities located in southeastern Mexico. The study communities were Lacanja and Victoria in Chiapas state and Ventanilla in Oaxaca state. Children living in Lacanja had total blood DDT levels (mean?±?SD, 29,039.6?±?11,261.4 ng/g lipid) that were significantly higher than those of children in Victoria (10,220.5?±?7,893.1 ng/g lipid) and Ventanilla (11,659.7?±?6,683.7 ng/g lipid). With respect to the 1-hydroxypyrene levels in urine samples, the levels in Lacanja (4.8?±?4.1 μg/L or 4.5?±?3.9 μmol/mol creatinine) and Victoria (4.6?±?3.8 μg/L or 3.9?±?3.0 μmol/mol Cr) were significantly higher than levels found in Ventanilla (3.6?±?1.4 μg/L or 2.5?±?0.5 μmol/mol Cr). In conclusion, our data indicate high levels of exposure in children living in the communities studied in this work. The evidence found in this study could be further used as a trigger to revisit local policies on environmental exposures.     

Pollution by organochlorine pesticides in Navachiste-Macapule,Sinaloa, Mexico

The lagoon system of Navachiste-Macapule is located in northern Mexico, in the state of Sinaloa, with an area of 24,000 ha. The main economic activity in the area is agriculture, and the lagoon lies next to the irrigation district ID-063 which covers 116,615 ha. The purpose of this study is to evaluate the levels of pollution generated by organochlorine pesticides (OC) in the surface sediments of the lagoon and in the agricultural drains of the ID-063 that are supposedly transported into the system as a result of agricultural activities and runoff from adjacent land. For this, between 2006 and 2007, 45 surface sediment samples were collected (warm dry, rainy and cold dry) from 15 sampling sites, during the three climatic seasons. Of these, eight were located inside the lagoon in marine conditions (salinity >31 PSU) and seven in the agricultural drains of the ID-063 in freshwater conditions (salinity <5 PSU). The average concentration of the OC in the sediments was 44.75 ng g^− 1, among which the group of the alicyclic compounds presented the greatest concentrations. The average value of the total organic carbon (TOC) in the sediments of the system was 0.90%. The sediments collected inside the lagoon had an average OC concentration of 18.97 ng g^− 1, and the predominant type of sediment was fine to very fine sand. The average OC concentration in the sediments collected in the agricultural drains was 75.69 ng g^− 1, where fine sediments (silt) were predominant. The presence of methoxychlor, endrin and heptachlor suggested that these compounds were continuously used in the system, even though their use is forbidden in Mexico.