Hazardous wastes transboundary movement management: a case study in Taiwan

More than 50,000 tons of hazardous waste are imported and exported worldwide each year. Over 50% of hazardous waste is exported to Southeast Asia, of which leather waste is the major component. The exportation quantities of hazardous waste to Organization of Economic Cooperation and Development (OECD) countries are decreasing while they are on the increase to non-OECD countries. Some of these wastes are intended for recycling purposes but the usage of some others is not stipulated. The hazardous waste importation quantity kept fairly steady from 1997 to 2000, of which ash or residues containing copper or copper compounds were the major component. Under existing regulations and measures, the transboundary movement of hazardous waste cannot be effectively controlled and monitored. In order to ensure environmentally sound hazardous waste management, EPA-Taiwan revised the Waste Disposal Act in 2001 and cooperated with the Industrial Development Bureau (IDB) to promote industrial waste reduction and recycling projects. Strategies were proposed based on evaluation according to the 3Es Principles and the site investigation in this study.     

A panel study on the relationship between biofuels production and sustainable development

Biomass is one of the renewable energy sources on which policy makers are greatly dependent on since it is a flexible feedstock capable of conversion into electricity, transport liquid fuels and heat by chemical and biological processes on demand. Though numerous publications have examined the relationship of economic growth with renewable energy and other parameters, biomass energy has never been included in these studies. Then, this study examines the causal relationship within a multivariate panel cointegration/error correction framework which combines the cross-section and time series data while allowing for heterogeneity across different provinces. After employing panel data regression model ranging from 2003 through 2012 to examine the relationships of biofuels production with sustainable development in China, the paper concludes that the development of biofuel energy production integrated with the consideration of the improvement of income per capita, and the attraction of more capital investment, does make a significant contribution to economic growth. However, some negative side effects including the increase of greenhouse emissions and the decrease of marginal land still coexist with the economic development. Of course, the importance of these findings lies on their implications and their adoption on strategic policies.     

Effects of dissolved inorganic carbon and nutrient levels on carbon fixation and properties of Thermosynechococcus sp. in a continuous system

The concept of CO₂ chemo-absorption by sodium hydroxide in a wet scrubber followed by microalgae cultivation was used as a means to reduce the major greenhouse gas. A thermophilic and alkaline tolerable cyanobacterium named Thermosynechococcus CL-1 (TCL-1) was cultivated in continuous system, with a carbonate-bicarbonate buffer as carbon source. The effects of dissolved inorganic carbon (DIC_in) and nutrient levels in influent on cell mass productivity, DIC removal efficiency, and alkaline solution regeneration by TCL-1 were investigated. The results show the highest cell mass productivity reaches 1.7 g L⁻¹ d⁻¹ under the highest DIC and nutrients level. Conversely, the best regeneration of alkaline solution proceeds from pH 9.5 to 11.3 under the lowest level. In addition, the highest ΔDIC (DIC consumption) and DIC removal efficiency are 42 mM and 43% at 113.2 and 57 mM DIC_in, respectively.     

Concentration and composition variations of metals in the outdoor PM10 of elementary schools during river dust episodes

Aeolian river dust can seriously affect the air quality in central Taiwan. The main purpose of this study was to assess the concentration variations of PM₁₀ and metals at different elementary schools during river dust episodes. River dust samples were taken from eight sites in the main bare soil areas of the Choshui River. PM₁₀ aerosols from four elementary schools in Yulin County were collected by means of high-volume samplers. Fifteen elements (Fe, Al, Ca, Mg, Mn, Zn, Ti, Ni, V, Cr, As, Pb, Cu, Co, and Cd) in the river dust and PM₁₀ were analyzed in this study. The coefficients of divergence (CDs) were obtained by comparing the metal compositions in PM₁₀ aerosols at the four schools on the sampling days with the mean metal contents in the river soil samples as reference. The CD values showed that metal compositions in the aerosols at high-exposure sites during river dust episodes were similar to those compositions in the river dust. The concentrations of PM₁₀ at the high-exposure schools during river dust episodes were much higher than those during non-river-dust episodes. This study also indicated that at the high-exposure sites, both the PM₁₀ and metal concentrations were higher than at the low-exposure and control sites, not only during the river dust episodes, but also after the river dust episodes. The concentrations of toxic metals (Ni, Cr, As, and Cd) at the high-exposure sites were about 11.3 times higher during the river dust episodes (189 ng/m³) than during non-river-dust episodes (16.7 ng/m³) and about 8.9 times higher during the same periods at the control site (21.3 ng/m³).     

Health risk of aerosols and toxic metals from incense and joss paper burning

We report for the first time the distribution and hazard potential of aerosol and metals resulting from joss paper burning. Burning joss paper and incense is a traditional custom in many Oriental countries. Large amounts of air pollutants, including particles, polycyclic aromatic hydrocarbons, toxic metals and other gaseous pollutants, are released into the environment during the burning stage. Many investigations have reported on the emission of pollutants from the incense burning. However, no work has been reported until now on the analysis of the released pollutants apart from polycyclic aromatic hydrocarbons. In this study, a micro-orifice uniform-deposit impactor and inductively coupled plasma optical emission spectrometry were, respectively, used to collect aerosols and characterize the toxic metals from joss paper burning. We studied two types of particulate matter (PM): PM_2.5 that are particles with a diameter smaller than 2.5 μm and PM₁₀ that are particles with a diameter smaller than 10 μm. PM_2.5 are the most potentially toxic particles. Our results showed that PM_2.5 are the major component of the pollutants and that the PM_2.5 to PM₁₀ ratio ranged from 62 to 99%. The metals Na, Ca, Mg, Al and K were the main species in the aerosol and in the bottom ash.     

Use of waste rubber as concrete additive.

For resource reutilization, scrap tyres have long been investigated as an additive to concrete to form 'Rubcrete' for various applications and have shown promising results. However, the addition of rubber particles leads to the degradation of physical properties, particularly, the compressive strength of the concrete. In this study, a theoretical model was proposed to shed light on the mechanisms of decrease in compressive strength due to the addition of rubber particles as well as improvement in compressive strength through modification of particle surfaces. The literature suggests that the compressive strength can be improved by soaking the rubber particles in alkaline solution first to increase the inter-phase bonding between the rubber particles and cement. Instead, we discovered that the loss in compressive strength was due to local imperfections in the hydration of cement, induced by the addition of heterogeneous and hydrophobic rubber particles. Microscopic studies showed that the rubber particles disturbed the water transfer to create channels, which were prone to cracking and led to a loss in the compressive strength. Unexpectedly, no cracking was found along the surfaces of the rubber particles, indicating that the bonding strength between the rubber particles and cement phases was not the critical factor in determining the compressive strength. Therefore, a theoretical model was proposed to describe the water transfer in the Rubcrete specimens to explain the experimental data. In the model, the local water available for hydration (Q) is: Q = -A(slv)/6piv, where Q, A(slv), and v are mass flow rate (kg s(-1)), Hamaker constant (J), and dynamic viscosity (m2 s(-1)), respectively. By maximizing the quantity Q and, in turn, the Hamaker constant A(slv), the compressive strength could be improved. The Hamaker constant A(slv) for water film on rubber particle surfaces was smaller than that for the hydrated cement particles; the water transfer rate was lower in the presence of rubber particles because the Hamaker constant A(slv) for water film on rubber particle surfaces was smaller than that on the hydrated cement particles. Thus, the compressive strength of Rubcrete could be improved by increasing the Hamaker constant of the system. This was achieved by increasing the refractive indices of the solids (n(s)). The refractive indices of materials increase with increases in functional groups, such as OH and SH on the surface. The model provided a possible mechanism for the efficacy of treating rubber particles with NaOH in improving the compressive strength. By using NaOH solution treatment, an oxygen-containing OH group was formed on the rubber surface to increase the Hamaker constant of the system, leading to higher compressive strength. Based on this mechanism, a novel method for modification of the rubber particles was also proposed. In this process, the rubber particles were partially oxidized with hot air/steam in a fluidized bed reactor to produce the hydrophilic groups on the surface of the particles. Preliminary results obtained so far are promising in accordance with the theory.     

Effects of polyelectrolytes on reduction of model compounds via coagulation

The objective of this research work was to evaluate the performance of enhanced coagulation by alum and polymer. Synthetic source waters containing high molecular weight humic acids, medium molecular weight tannic acids and low molecular weight p-hydroxybenzoic acid were formulated by adjusting the concentration of turbidity and pH; and jar tests were used to study the effect of various types and dosages of polymer on reducing the above model compounds. At a specific pH condition, the applied alum dosage would efficiently decrease the turbidity to 2 NTU follows the order: humic>tannic>p-hydroxybenzoic acid. Adjustment of pH influenced the performance of alum obviously but not of p-DADMAC. High p-DADMAC dosage overwhelming the effects of alum is less affected by pH adjustment. The results of this investigation reveal that enhanced coagulation with p-DADMAC was founded to be very effective for removing high-molecular-weight THM precursors, i.e., humic acid and tannic acid, and markedly reduced the alum dosages required for turbidity removal. The other two polymers, i.e., cationic PAM and non-ionic PAM, which had higher molecular weight but lower charge density than p-DADMAC, were not capable of removing organic precursors. It was thus concluded that enhanced coagulation with polymer, p-DADMAC, could be considered as a promising technique for removal of NOMs with hydrophobic and higher-molar-mass (>1K) in water treatment plants.     

Contributions of dry and wet depositions of polychlorinated dibenzo-p-dioxins and dibenzofurans to a contaminated site resulting from a penetachlorophenol manufacturing process

The soils at a factory for manufacturing pentachlorophenol were heavily contaminated by polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). In order to verify the contributions of dry and wet deposition of PCDD/Fs from the ambient air, the concentration of PCDD/Fs in ambient air and soil were measured, the partition of particle- and gas-phases of atmospheric PCDD/Fs was calculated, and the annual fluxes of total dry and wet PCDD/F depositions were modeled. Average atmospheric PCDD/F concentration was 1.24 ng Nm^???3 (or 0.0397 ng I-TEQ Nm^???3). Moreover, over 92.8% of total PCDD/Fs were in the particle phase, and the dominant species were high chlorinated congeners. The total PCDD/F fluxes of dry and wet deposition were 119.5 ng m^???2 year^???1 (1.34 ng I-TEQ m^???2 year^???1) and 82.0 ng m^???2 year^???1 (1.07 ng I-TEQ m^???2 year^???1), respectively. By scenario simulation, the total fluxes of dry and wet PCDD/F depositions were 87.1 and 68.6 ng I-TEQ, respectively. However, the estimated PCDD/F contents in the contaminated soil were 839.9 ?? g I-TEQ. Hence, the contributions of total depositions of atmospheric PCDD/F were only 0.02%. The results indicated that the major sources of PCDD/F for the contaminated soil could be attributed to the pentachlorophenol manufacturing process.