Patterns of soil copper contamination and temporal changes in vegetation in the vicinity of a copper rod rolling factory

Patterns of soil copper contamination have been examined in the vicinity of a copper rod rolling plant in Prescot, Merseyside, UK. The site, established in 1975, was found to possess clear patterns of soil copper contamination, with the highest levels of HNO3 and water-extractable fractions encountered in the factory grounds adjacent to the location of the furnace chimney. The majority of the copper had accumulated in the upper soil horizons. The site is surrounded by planted lawns, established at different times after the commissioning of the plant. The species composition of the extant grassland communities, found at sites with differing soil copper levels, was compared to the composition of the original seed mixtures sown at each of ten sites. These surveys clearly showed that different levels of soil copper contamination had produced significant changes in grassland composition with time. At the most polluted site, copper tolerant Agrostis capillaris clones were the main grasses present only two years after the area was sown with a four-species mixture of non-tolerant grass seed. Lolium perenne possessed extreme sensitivity to copper. A number of dicotyledonous species, normally considered sensitive to elevated copper levels, were found to be unaffected where such conditions had arisen after plants had established from seed.     

Arsenic sorption by red mud-modified biochar produced from rice straw

Red mud-modified biochar (RM-BC) has been produced to be utilized as a novel adsorbent to remove As because it can effectively combine the beneficial features of red mud (rich metal oxide composition and porous structure) and biochar (large surface area and porous structure properties). SEM-EDS and XRD analyses demonstrated that red mud had loaded successfully on the surface of biochar. With the increasing of pH in solution, arsenate (As(V)) adsorption on RM-BC decreased while arsenite (As(III)) increased. Arsenate adsorption kinetics process on RM-BC fitted the pseudo-second-order model, while that of As(III) favored the Elovich model. All sorption isotherms produced superior fits with the Langmuir model. RM-BC exhibited improved As removal capabilities, with a maximum adsorption capacity (Q_max) for As(V) of 5923 μg g^?1, approximately ten times greater than that of the untreated BC (552.0 μg g^?1). Furthermore, it has been indicated that the adsorption of As(V) on RM-BC may be strongly associated with iron oxides (hematite and magnetite) and aluminum oxides (gibbsite) by X-ray absorption near-edge spectroscopy (XANES), which was possibly because of surface complexation and electrostatic interactions. RM-BC may be used as a valuable adsorbent for removing As in the environment due to the waste materials being relatively abundant.     

An empirical model of soil chemical properties that regulate methane production in Japanese rice paddy soils

To understand which soil chemical properties are the best predictors of CH4 production in rice paddy soils, a model was developed with empirical data from nine types of rice soils collected around Japan and anaerobically incubated at 30 degrees C for 16 wk in laboratory conditions. After 1, 2, 4, 8, and 16 wk of incubation, CO2, CH4, and Fe(II) were measured to understand soil organic matter decomposition and iron (Fe) reduction. Available N (N ava) was also measured at the end of incubation. The results showed that decomposable C and reducible Fe are two key parameters that regulate soil CH(4) production (P CH4). There was a significant relationship between decomposable C and available N (N ava) (r2 = 0.975**). Except for a sandy soil sample, a significant relationship between total Fe (Fe total) and reducible Fe was found. From this experiment, a simple model of soil CH4 production was developed: P CH4 = 1.593N(ava) - 2.460Fe total/1000 (each unit was mg kg(-1) soil). After simulated CH4 production by two soil chemical properties as above, there was a significant consistency between model simulation and actual measurement (r2 = 0.831**).     

Field sampling of soil pore water to evaluate trace element mobility and associated environmental risk

Monitoring soil pollution is a key aspect in sustainable management of contaminated land but there is often debate over what should be monitored to assess ecological risk. Soil pore water, containing the most labile pollutant fraction in soils, can be easily collected in situ offering a routine way to monitor this risk. We present a compilation of data on concentration of trace elements (As, Cd, Cu, Pb, and Zn) in soil pore water collected in field conditions from a range of polluted and non-polluted soils in Spain and the UK during single and repeated monitoring, and propose a simple eco-toxicity test using this media. Sufficient pore water could be extracted for analysis both under semi-arid and temperate conditions, and eco-toxicity comparisons could be effectively made between polluted and non-polluted soils. We propose that in-situ pore water extraction could enhance the realism of risk assessment at some contaminated sites.     

Prenatal diagnosis of complete sole trisomy 1q

The prenatal diagnosis of a complete trisomy of the long arm of chromosome 1 is reported. Major ultrasound findings included: nuchal thickening, bi-temporal narrowing, a single choroid plexus cyst, andmild ventriculomegaly. There was a mass in the chest and abdomen, pleural effusion, ascites and a hyperechoic bowel. Skin edema was present. The fetus died at 26 weeks' gestation. A literature review is presented of 17 de novo and two inherited cases with only trisomy 1q. Of note is the fact that 3/5 prenatally detected 1q trisomies have teratomas. A review of the literature reveals a dismal outcome fortrisomy 1q cases if the duplication involves bands 1q25→q32. Copyright © 2001 John Wiley & Sons, Ltd.     

Changes in distribution and microstructure of bauxite residue aggregates following amendments addition

Bauxite residue is a highly alkaline byproduct which is routinely discarded at residue disposal areas. Improving soil formation process to revegetate the special degraded lands is a promising strategy for sustainable management of the refining industry. A laboratory incubation experiment was used to evaluate the effects of gypsum and vermicompost on stable aggregate formation of bauxite residue. Aggregate size distribution was quantified by fractal theory, whilst residue microstructure was determined by scanning electron microscopy and synchrotron-based X-ray micro-computed tomography. Amendments addition increased the content of macro-aggregates( 250 μm) and enhanced aggregate stability of bauxite residue. Following gypsum and vermicompost addition, fractal dimension decreased from 2.84 to 2.77, which indicated a more homogeneous distribution of aggregate particles. Images from scanning electron microscopy and three-dimensional microstructure demonstrated that amendments stimulate the formation of improved structure in residue aggregates. Pore parameters including porosity, pore throat surface area, path length, and path tortuosity increased under amendment additions. Changes in aggregate size distribution and microstructure of bauxite residue indicated that additions of gypsum and vermicompost were beneficial to physical condition of bauxite residue which may enhance the ease of vegetation.     

The need for spatially explicit quantification of benefits in invasive‐species management

Worldwide, invasive species are a leading driver of environmental change across terrestrial, marine, and freshwater environments and cost billions of dollars annually in ecological damages and economic losses. Resources limit invasive‐species control, and planning processes are needed to identify cost‐effective solutions. Thus, studies are increasingly considering spatially variable natural and socioeconomic assets (e.g., species persistence, recreational fishing) when planning the allocation of actions for invasive‐species management. There is a need to improve understanding of how such assets are considered in invasive‐species management. We reviewed over 1600 studies focused on management of invasive species, including flora and fauna. Eighty‐four of these studies were included in our final analysis because they focused on the prioritization of actions for invasive species management. Forty‐five percent (n = 38) of these studies were based on spatial optimization methods, and 35% (n = 13) accounted for spatially variable assets. Across all 84 optimization studies considered, 27% (n = 23) explicitly accounted for spatially variable assets. Based on our findings, we further explored the potential costs and benefits to invasive species management when spatially variable assets are explicitly considered or not. To include spatially variable assets in decision‐making processes that guide invasive‐species management there is a need to quantify environmental responses to invasive species and to enhance understanding of potential impacts of invasive species on different natural or socioeconomic assets. We suggest these gaps could be filled by systematic reviews, quantifying invasive species impacts on native species at different periods, and broadening sources and enhancing sharing of knowledge.     

The interaction effects of binary mixtures of benzene and toluene on the developing heart of medaka (Oryzias latipes)

The United States Environmental Protection Agency (USEPA) has pursued the estimation of risk of adverse health effects from exposure to chemical mixtures since the early 1980s. Methods used to calculate risk estimates of mixtures were often based on single chemical information that required assumptions of dose-addition or response-addition and did not consider possible changes in response due to interaction effects among chemicals. Full factorial designs for laboratory studies can produce interactions information, but these are expensive to perform and may not provide the information needed to evaluate specific environmentally relevant mixtures. In this research, groups of Japanese medaka (Oryzias latipes) embryos were exposed to binary mixtures of benzene and toluene as well as to each of these chemicals alone. Endpoint specific dose-response models were built for the hydrocarbon mixture under an assumption of dose-additivity, using the single chemical dose-response information on benzene and toluene. The endpoints included heart rate, heart rate progression, and lethality. Results included a synergistic response for heart rate at 72 h of development, and either additivity or antagonism for all other endpoints at 96 h of development. This work uses an established statistical method to evaluate the toxicity of an environmentally relevant mixture to ascertain whether interaction effects are occurring, thus providing additional information on toxicity.     

The vulnerability of hydropower production in the Zambezi River Basin to the impacts of climate change and irrigation development

The Zambezi River Basin in southern Africa is relatively undeveloped from both a hydropower and irrigated agriculture perspective, despite the existence of the large Kariba and Cahora Bassa dams. Accelerating economic growth increases the potential for competition for water between hydropower and irrigated agriculture, and climate change will add additional stresses to this system. The objective of this study was to assess the vulnerability of major existing and planned new hydropower plants to changes in climate and upstream irrigation demand. Our results show that Kariba is highly vulnerable to a drying climate, potentially reducing average electricity generation by 12 %. Furthermore, the expansion of Kariba generating capacity is unlikely to deliver the expected increases in production even under a favourable climate. The planned Batoka Gorge plant may also not be able to reach the anticipated production levels from the original feasibility study. Cahora Bassa’s expansion is viable under a wetting climate, but its potential is less likely to be realised under a drying climate. The planned Mphanda Nkuwa plant can reach expected production levels under both climates if hydropower is given water allocation priority, but not if irrigation is prioritised, which is likely. For both Cahora Bassa and Mphanda Nkuwa, prioritising irrigation demand over hydropower could severely compromise these plants’ output. Therefore, while climate change is the most important overall driver of variation in hydropower potential, increased irrigation demand will also have a major negative impact on downstream plants in Mozambique. This implies that climate change and upstream development must be explicitly incorporated into both project and system expansion planning.     

TECIIMQUES FOR DETECTING HYDROLOGIC CHANGE IN HIGH RESOURCE STREAMS1

ABSTRACT: A “synthetic paired basin” technique that combines hydrologic monitoring and watershed modeling proves to be a useful tool in detecting hydrologic change in creeks draining basins undergoing urbanization. In this approach, measured stream flow following subbasin treatment (a period of urbanization) is compared with flow from a control subbasin over the same time period. The control subbasin is the pretreatment subbasin itself as represented by a well‐calibrated hydrologic model that is input with post‐treatment meteorological data. The technique is illustrated for stream monitoring sites at the outlets of two high‐resource sub‐basins in the Bear Creek basin of King County, Washington. Application of this technique holds promise to provide earlier warning of cumulative, human impacts on aquatic resources and to better inform adaptive watershed management for resource protection.