Analytical survey of arsenic in geothermal waters from sites in Kyushu,Japan, and a method for removing arsenic using magnetite

The objective of this study was to survey the cation and anion contents of geothermal waters to gather fundamental information on geographical variations. Sixteen sites in hot spring areas on the island of Kyushu in Japan were studied. The study focused on the arsenic content of the samples. Very high arsenic concentrations (more than 0.1 mg/l) were detected in most of the geothermal waters sampled. High contents of boron and fluoride (more than 1.0 mg/l) were also detected in some samples. Arsenic removal was performed on a laboratory scale using columns packed with a magnetite-type adsorbent. The reduction of arsenic contamination to a concentration of less than 0.01 mg/l could be achieved in the early stages of adsorption (bed volume = 200).     

Rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar

The rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar was carried out in a hydrogen atmosphere at 1073 K and 973 K. The assumed oligomers were partially pyrolyzed epoxy resin with biomass tar as solvent for the resin. The product distributions obtained from rapid hydropyrolysis of phenol and bisphenol-A are shown. We also discuss the effects of reaction temperature and hydrogen partial pressure on the product yield. In particular, more phenol was produced from bisphenol-A at 973 K than at 1073 K. The yield of methane, which was the final hydropyrolysis product, increased with increasing hydrogen partial pressure, whereas benzene and phenol were believed to behave as intermediate products in the hydropyrolysis reaction. The results suggest that phenol could be obtained with high selectivity from tar by optimizing the reaction conditions.     

Ignitability characteristics of aluminium and magnesium dusts that are generated during the shredding of post-consumer wastes

The authors investigated the ignitability of aluminium and magnesium dusts that are generated during the shredding of post-consumer waste. The relations between particle size and the minimum explosive concentration, the minimum ignition energy, the ignition temperature of the dust clouds, etc. the relation between of oxygen concentration and dust explosion, the effect of inert substances on dust explosion, etc. were studied experimentally.

The minimum explosive concentration increased exponentially with particle size. The minimum explosive concentrations of the sample dusts were about 170 g/m³ (aluminium: 0–8 μm) and 90 g/m³ (magnesium: 0–20 μm). The minimum ignition energy tended to increase with particle size. It was about 6 mJ for the aluminium samples and 4 mJ for the magnesium samples. The ignition temperature of dust clouds was about 750 °C for aluminium and about 520 °C for magnesium. The lowest concentrations of oxygen to produce a dust explosion were about 10% for aluminium and about 8% for magnesium. A large mixing ratio (more than about 50%) of calcium oxide or calcium carbonate was necessary to decrease the explosibility of magnesium dust. The experimental data obtained in the present investigation will be useful for evaluating the explosibility of aluminium and magnesium dusts generated in metal recycling operations and thus for enhancing the safety of recycling plants.     

Economic evaluation of sewage treatment processes in India

This paper evaluates the total annual cost including capital and operation and maintenance (O&M) costs for the up-flow anaerobic sludge blanket (UASB) and waste stabilization pond (WSP) systems operated in India. It also compares UASB and WSP systems with the activated sludge process (ASP) and biological aerated filter (BAF) systems in terms of total annual cost and chemical oxygen demand (COD) removal cost by assuming various annual interest rates and land prices. It was found that the relationship between capital and O&M costs per unit size of a UASB or WSP system and its treatment capacity can be established by a first-order equation. The relation between the cost of organic removal and capital or O&M cost for various sewage treatment systems at various annual interest rates revealed that, for the Indian context, UASB could be the most suitable option in terms of expenses and treatment efficiency.     

Confirmation of polychlorinated biphenyl (PCB) distribution in the blood and verification of simple quantitative method for PCBs based on specific congeners

We measured the concentration of each polychlorinated biphenyl (PCB) congener in whole blood, plasma and blood cells, and investigated the distribution of PCBs in human blood using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The PCB concentrations in plasma and whole blood in terms of lipid concentrations were almost equal, with a correlation coefficient of r = 0.972. In the blood, the ratio of PCBs in blood cells to those in plasma was generally about 1:9 and the congener distribution patterns in blood cells and plasma were similar.We performed verification of a simple mass screening method by obtaining information on the main PCB congeners for investigations on human accumulation and exposure. The total concentration of the seven PCB congeners (UNEP-7) proposed to the United Nations Environment Programme (UNEP) by Muir and Morita was about 50% of the total concentration of all PCB congeners, and UNEP-30 was about 80%. The seven main congeners in the blood (MCB-7) showed a value that was about 60%, and MCB-30 showed a value that was about 90%. Determinations with the main congeners in the blood showed a correlation of r = 0.990 or more between the main eight congeners (MCB-7 plus #74) and the total PCB concentration for all congeners. The results suggest that, although total PCB concentration can be effectively estimated from the main seven congeners, the main eight congeners would be preferable, and that the use of these congeners in the simple mass screening method would be effective for populations in areas uncontaminated by PCBs.     

Production of biologically safe digested manure for land application by a full-scale biogas plant with heat-inactivation

Inactivation of indigenous indicator micro-organisms such as faecal coliforms, coliphages, and faecal streptococci was investigated in a full-scale biogas plant that mainly digested cow manure. The biogas plant consisted principally of a feed reservoir, fermentation tank (37 degrees C), heat-inactivation process (70 degrees C), and five reservoirs for the heat-inactivated, digested manure that was used by a local livestock farmer as liquid fertilizer. Although all the indicators tended to exhibit stepwise decreases with each stage of treatment, coliphages were found to be more capable of surviving than faecal coliforms and faecal streptococci under mesophilic anaerobic conditions as well as high temperature conditions (heat-inactivation at 70 degrees C). Liquid fertilizer produced at the biogas plant had faecal coliform densities less than the stipulations of the US EPA 40 CFR 503 Class A limits. Heat-inactivation tests indicated that although coliphages exhibited more tolerance than other bacterial indicators between 37 and 70 degrees C, they were more sensitive to continuous temperature increase than faecal coliforms and faecal streptococci.     

Correction to: An automated assessment method for integrated circuit chip detachment from printed circuit board by multistep binarization and template matching of X-ray transmission images

Given the increase in digital product waste, demand for recycling of printed circuit boards (PCBs) is increasing. Precious and minor metals are often well concentrated in integrated circuit (IC) chips, especially in PCBs; hence, IC chips are primary targets for recycling. The technology for the non-destructive detachment of IC chips from PCBs is increasing in sophistication; however, the effectiveness of IC chip detachment is currently assessed manually and visually. In the present study, an automated IC chip detachment assessment method was developed, which combines multistep binarization and template matching of X-ray transmission images of crushed PCBs. To validate the method, five types of mechanically crushed PCBs from mobile phones were examined, and the developed method successfully assessed the IC chip detachment rate, with an average error rate of only 2.2% compared to visual assessment.

     

Degradation of bisphenol A by photo-fenton processes

The photo-Fenton reactions, which could yield hydroxyl radicals via the catalytic degradation of H₂O₂ by Fe(II), were focused as one of the abiotic degradation processes of bisphenol A (BPA) in surface waters. At pH 6, in the presence of H₂O₂ only, 32% of BPA was degraded after 120?min of irradiation. However, 97% of BPA was degraded in the presence of both H₂O₂ and Fe(II). Without light irradiation, no BPA degradation was observed even in the presence of Fe(II) and H₂O₂. These results show that photo-Fenton processes are effective in the natural attenuation of BPA in surface water. In addition, the presence of humic acids (HAs), which were of more aliphatic nature, resulted in enhancing BPA degradation via the photo-Fenton processes. Therefore, HAs can be one of the important factors in enhancing the degradation of BPA in surface water via the photo-Fenton processes.     

Utilization of calcite and waste glass for preparing construction materials with a low environmental load

In this study, porous calcite materials are hydrothermally treated at 200 °C using powder compacts consisting of calcite and glasses composed of silica-rich soda-lime. After treatment, the glasses are converted into calcium aluminosilicate hydrates, such as zeolite phases, which increase their strength. The porosity and morphology of new deposits of hydrothermally solidified materials depend up on the chemical composition of glass. The use of calcite and glass in the hydrothermal treatment plays an important role in the solidification of calcite without thermal decomposition.