Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Degradation of PVC Containing Mixtures in the Presence of HCl Fixators

Degradation of a model polymer mixture (PVC/PS/PE) and a waste polymer mixture in the presence of HCl fixators (Red Mud, precipitated CaCO₃ and dolamite) was studied using thermal gravimetric analysis (TGA) and a cycled-spheres-reactor. The experiments in cycled-spheres reactor model were performed by stepwise pyrolysis. Liquid products and HCl from each step were collected separately. For the model polymer mixture, the precipitated CaCO₃ showed the best effect on the fixation of evolved HCl and the reduction of chlorine content in the liquid products whereas RM yielded the best result for the waste polymer mixture. In addition, using HCl fixator also affected the degradation of both types of polymer mixture, leading to the formation of more gaseous and less residue.     

Recovery of valuable metals from WPCB fines by centrifugal gravity separation and froth flotation

Journal of Material Cycles and Waste Management - This paper reports physical and physicochemical routes for the recycling of gold, silver, and copper from waste printed circuit boards (WPCBs). The...     

The behaviour of suppliers and consumers in mandated markets: the introduction of the ethanol–petrol blend E10 in Germany

In December 2010, the German government increased the maximum ethanol content that can be blended with petrol from 5% to 10%, which facilitated the introduction of the ethanol–petrol blend E10. The revised ethanol–petrol blend was introduced with ambitions towards decarbonizing the transport sector as well as to support energy security and rural development. While usually supportive of actions aimed to combat climate change, the great majority of German motorists have refused to buy E10. The lacking demand for E10 is the empirical phenomenon addressed by this study. How did the fuel suppliers comply with the policy provisions? Which actors made attempts to influence the motorists’ demand for the new ethanol–petrol blend? Which actor was assigned the responsibility for the problems that occurred upon the rollout of the new fuel type? These research questions guide this study, which concentrates on the behaviour of transport fuel suppliers and consumers in mandated markets, that is, markets created by policy provisions.     

Effects of 2,4-dichlorophenoxy acetic acid dimethyl amine salt on dental hard tissue formation in rats

2,4-Dichlorophenoxy acetic acid dimethyl amine salt (2,4-D DMA), as one of the phenoxy acids, is used as a herbicide mainly against broad-leaf weeds in cereal crops, sugar cane, and on turf, pasture, and non-crop land. Some formulations of 2,4-D may be contaminated with dioxins. Recently, it has been shown that chlorinated organic compounds, dioxins, and furans are present in mother's milk and may cause developmental defects in children's teeth. Therefore, we aimed to evaluate the effects of 2,4-D DMA on odontogenesis in rats. 2,4-D DMA was given orally combined with rat food to pregnant albino rats. Each group consisted of two pregnant rats and, 0 (control, group A), 25 ppm (group B), 50 ppm (group C), and 100 ppm (group D) 2,4-D DMA was given to each pregnant rat as daily intake. 2,4-D DMA affected young rat's dental development and dose-related findings were found in experimental groups. The odontoblast layer was irregular and globular dentin formation was present in Groups B, C, and D but not in the control group. Thickness of enamel decreased in Groups C and D. The results of the study have shown that 2,4-D DMA could disturb dental development in rats even in relatively low doses. It is concluded that environmental contaminants such as chlorinated organic pesticides may play an important role in infant's dental development when taken via mother's milk.     

Feedstock recycling from plastic and thermoset fractions of used computers (I): pyrolysis

The increasing production of computers, the progress in their performance, and the shorter time between innovation and production has led to increasing numbers of obsolete products. It has thus become necessary to recover some materials from old computers and to protect the environment from a new type of pollution. Such recycling is difficult because of the diversity of polymeric materials used, e.g., thermoplastics (polystyrene or acrylonitrile-butadiene-styrene) and thermosets (epoxy resins), and the relatively high levels of flame retardants (halogen- and nitrogen-containing compounds) added during production. Pyrolysis seems to be a suitable way to recover materials and energy from such waste without component separation if an efficient method for reducing toxic compounds can be applied. In this study, the pyrolysis of plastic and thermoset fractions (keyboards, casings, printed circuit boards, and mixtures thereof) of used computers was studied by thermogravimetry and batch reactor pyrolysis. The degradation products were separated into three fractions, solid, liquid, and gaseous, each of them being characterized by suitable methods such as gas chromatography (GC-MSD, gas chromatography-mass spectrometry detection; GC-AED, gas chromatography-atomic emission detection), infrared (FT-IR) and 1H-NMR (nuclear magnetic resonanace) spectroscopy, and elemental analysis. It has been established that most of the halogens, nitrogen, and sulfur is concentrated in the residue. However, the elimination of hazardous toxic compounds, mainly those containing bromine, is necessary before being able to safely use the pyrolysis oils as fuels or in refinery or petrochemical industry flows.     

Pyrolysis of the tetra pak

This study deals with pyrolysis of tetra pak which is widely used as an aseptic beverage packaging material. Pyrolysis experiments were carried out under inert atmosphere in a batch reactor at different temperatures and by different pyrolysis modes (one- and two-step). The yields of char, liquid and gas were quantified. Pyrolysis liquids produced were collected as three separate phases; aqueous phase, tar and polyethylene wax. Characterization of wax and the determination of the total amount of phenols in aqueous phase were performed. Chemical compositions of gas and char products relevant to fuel applications were determined. Pure aluminum can be also recovered by pyrolysis.     

Conversion of leather wastes to useful products

The main objective of the present study is to investigate the production of useful materials from different kinds of leather waste. Three different types of tannery wastes (chromium- and vegetable-tanned shavings, and buffing dust) were pyrolyzed in a fixed bed reactor at temperatures of 450 and 600 °C under N₂ atmosphere. Gas, oil, ammonium carbonate and carboneous residue were obtained by pyrolysis. The effect of temperature and type of leather waste on product distribution of pyrolysis was investigated. Buffing dust gave the highest yield of oil (ca. 23%), while other wastes recorded yields of ca. 9%. Results of elemental analysis and column chromatography showed that pyrolysis oils could be used as fuel or chemical feedstock after re-treatment. The yields of carboneous residue (chars) were between 37.5% and 48.5% and their calorific value was between 4300 and 6000 kcal kg⁻¹, suitable for use as solid fuel. In addition, these chars were activated by CO₂ to obtain the activated carbon. The activated carbon having highest surface area (799.5 m² g⁻¹) was obtained from chromium-tanned shavings. Activated carbons prepared from chromium-tanned leather were presented as an adsorbant for the adsorption of dyes from aqueous solution.