Material and energy recovery from Automotive Shredded Residues (ASR) via sequential gasification and combustion

Shredding is the common end-of-life treatment in Europe for dismantled car wrecks. It produces the so-called Automotive Shredded Residue (ASR), usually disposed of in landfill. This paper summarizes the outcome of a study carried out by Politecnico di Milano and LEAP with the support of Actelios SpA on the prospects of a technology based on sequential gasification and combustion of this specific waste stream. Its application to the treatment of ASR allows the recovery of large fractions of metals as non-oxidized, easily marketable secondary raw materials, the vitrification of most of the ash content and the production of power via a steam cycle. Results show that despite the unfavourable characteristics of ASR, the proposed technology can reach appealing energy performances. Three of four environmental impact indicators and the cumulative energy demand index are favourable, the main positive contributes being electricity production and metal recovery (mainly aluminium and copper). The only unfavourable indicator is the global warming index because, since most of the carbon in ASR comes from fossil sources, the carbon dioxide emissions at the stack of the thermal treatment plant are mainly non-renewable and, at the same time, the avoided biogas production from the alternative disposal route of landfilling is minor.     

Furniture wood wastes: Experimental property characterisation and burning tests

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected “raw” and primarily “engineered” (“composite”) wood wastes.The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in “engineered” wood wastes as compared with “raw” wood wastes; and relatively high energy content values of “engineered” wood wastes (ranging on the whole from 3675 to 5105 kcal kg⁻¹ for HHV, and from 3304 to 4634 kcal kg⁻¹ for LHV).The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in “engineered” wood burning tests of pyrroles and amines, as well as the additional presence (as compared with “raw” wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon.Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in “engineered” wood burning tests as compared with “raw” wood burning test; and considerable generation of the respirable PM₁ fraction during incomplete industrial wood burning.     

Sustainability: A Study of the Level of Ecological Behavior of Postgraduate Students in Brazil

The decline in the supply of natural resources is a cause for concern, especially given continued worldwide population growth. New habits and attitudes toward resource use are slowly being introduced into the everyday lives of persons residing in a number of countries. The term “ecological behavior” refers to acting in favor of the environment, whether these actions are voluntarily or not, or learned or not (Pato & Tamayo, 2006 ). The general objective of this study is to identify the environmental behavior—one of several terms used interchangeably with ecological behavior—of graduate students from a Brazilian federal institution of higher education. We chose this particular group because many of them already act, or will act, as professors. Thus, by virtue of their positions, they will function as opinion leaders who will influence the education of future professionals, establishing a chain through which shared values can gradually change the environmental behavior of society.     

Effects of gas flow rate, inlet concentration and temperature on the biofiltration of toluene vapors

In this work the variation in the elimination capacity of a biofilter as a function of the gas flow and toluene concentration was studied. A bioreactor 0.75 m high x 14.5 cm diameter was used, divided into three equal stages, using compost to support the microorganisms, and sea shells to control the pH. The biofiltration of toluene was evaluated for flows between 0.12 and 0.73 m(3)h(-1) in a concentration range of 1-3.2 gm(-3). It was observed that on increasing the toluene inlet load by 90% (from 37 to 70 gm(3)h(-1)), the conversion by the biofilter varied by only 5% (from 98% to 93%). The biofiltration system used achieved elimination capacities of up to 82 gm(-3)h(-1) for a toluene load of 100 gm(-3)h(-1).     

Population genetic structure of the prosobranch Nassarius reticulatus (L.) in a ria seascape (NW Iberian Peninsula) as revealed by RAPD analysis

Randomly amplified polymorphic DNA (RAPD) banding patterns were compared between samples of the netted dogwhelk Nassarius reticulatus from 11 locations along the NW Iberian Peninsula coast. To detect if rias (estuaries formed by drowned river valleys) might promote genetic differentiation, five sampling sites were located within a ria (ria of Muros) and the remaining six were scattered along open-coast areas at increasing distances from the ria mouth. Population differentiation statistics (Φ-values) were estimated using a hierarchical analysis of molecular variance (AMOVA) with samples sorted into two groups: open-coast and ria populations. Despite a high potential to disperse, AMOVA demonstrated a modest, statistically significant genetic heterogeneity among N. reticulatus populations. Most of the genetic structure resided in differences among open-coast populations; ria populations were genetically homogeneous. No obvious geographical pattern was detected for the pairwise genetic distances (non-metric multidimensional scaling; UPGMA tree; Mantel test). Unlike previous studies with other species at a variety of estuarine systems other than rias, there was no evidence that the ria of Muros may enhance the genetic divergence of N. reticulatus populations. This discrepancy is discussed in relation to the biological features of the species (high dispersal potential and a preference for mid-low estuarine habitat) and the strong hydrographic connectivity between ria and neighbouring off-shore waters.     

Orientation of sandhoppers at different points along a dynamic shoreline in southern Tuscany

Orientation experiments were carried out on Talitrus saltator (Crustacea Amphipoda) at four points along 3 km on a dynamic sandy beach inside the Maremma Regional Park (Grosseto, Italy) to highlight behavioural variation related to distance from a river mouth, to erosion or accretion of shoreline, and to human trampling on the beach. Tests were performed using circular transparent Plexiglas arenas, contemporaneously at the four points. Replicates were made in 2 different months (September 2002 and May 2003), on 2–3 successive days, in the morning and afternoon. The distributions of the angles of orientation were compared for the different points and seasons, and multiple regression analysis was performed to test the effects of environmental and intrinsic variables on orientation. Sandhoppers showed the highest scatter at the eroded shoreline, intermediate scatter at the accreting beach most distant from the river mouth, and consistent orientation seaward at the least disturbed point. Orientation of sandhoppers was significantly affected by season, global radiation, time of day, distance from the river mouth, and human trampling. Sex and air humidity were of minor significance in the multiple regression model. The results, on the one hand, confirm plasticity in orientation of sandhoppers living on a dynamic shoreline, and on the other hand, show that variation in orientation could potentially be used as a bioindicator of shoreline changes.Communicated by R. Cattanevo-Vietti, Genova     

Exposure to Selected Heavy Metals Through Water Ingestion in an Area Under the Influence of Tanneries

This study evaluated the potential toxicological risk posed to human health due to the exposure to heavy metals by water ingestion in an area affected by tanneries – the Cadeia-Feitoria hydrographic basin (Brazil). River water was collected at 10 sites, every 3 months, from July 1999 to April 2000. After acid digestion, total metal concentration was determined by inductively coupled plasma optical emission spectrometry (Cd, Cu, Cr, Ni, Zn), flame atomic absorption (Al, Fe, Pb, Mn), or cold vapor atomic absorption spectrometry (Hg). Cr(VI) was complexed with diphenyl-carbazide and detected by UV–vis spectrometry. In order to quantify the risk of exposure, the risk assessment methodology employed by the Environmental Protection Agency of the United States was applied at a screening level. The assumed scenarios included extreme exposure patterns (ingestion of untreated water, conversion of Cr(III) to Cr(VI), temporal peaks of pollution). Fe, Al, Cd, Hg, and Pb were not included in the risk analysis, since they showed a low toxicity potential or were undetected in the samples. The selected metals presented Hazard Quotients < 1, in the following order of increasing risk: Cu < Cr(III) < Zn < Ni < Mn < Cr(VI). Hazard indexes, representing the additive effect of contaminants, were also low in the basin (< 1), but comparatively increased in the lower reach of Feitoria and Cadeia Rivers. Although noncarcinogenic risk levels did not suggest possible adverse toxicological effects to the human population, a considerable deviation from background conditions was observed downstream the area where tanneries are mainly located.