Performance of semipermeable membrane devices for sampling of organic contaminants in groundwater

Lipid-filled semipermeable membrane devices (SPMDs) are receiving increasing attention as passive, in situ samplers for the assessment of environmental pollutant exposure. Although SPMDs have been successfully used in a variety of field studies in surface waters, only a few studies have addressed their characteristics as groundwater samplers. In this study, the performance of the SPMDs for monitoring organic contaminants in groundwater was evaluated in a pilot field application in an area severely contaminated by chemical waste, especially by chlorinated hydrocarbons. The spatial distribution of hydrophobic groundwater contaminants was assessed using a combination of passive sampling with SPMDs and non-target semiquantitative GC-MS analysis. More than 100 contaminants were identified and semiquantitatively determined in SPMD samples. Along the 6 field sites under investigation, a large concentration gradient was observed, which confirms a very limited mobility of hydrophobic substances in dissolved form in the aquifer. The in situ extraction potential of the SPMD is limited by groundwater flow, when the exchange volume of well water during an exposure is lower than the SPMD clearance volume for the analytes. This study demonstrates that SPMDs present a useful tool for sampling and analyzing of groundwater polluted with complex mixtures of hydrophobic chemicals and provides guidance for further development of passive sampling technology for groundwater.     

Manganese toxicity thresholds for restoration grass species

Manganese toxicity thresholds for restoration plants have not been established. As a result, ecological risk assessments rely on toxicity thresholds for agronomic species, which may differ from those of restoration species. Our objective was to provide Mn toxicity thresholds for grasses commonly used in restoration. We used a greenhouse screening study where seedlings of redtop, slender wheatgrass, tufted hairgrass, big bluegrass, basin wildrye, and common wheat were grown in sand culture and exposed to increasing concentrations of Mn. The LC50, EC50-plant, EC50-shoot, EC50-root, PT50-shoot, and the PT50-root were then determined. Phytotoxicity thresholds and effective concentrations for the restoration species were generally higher than values reported for agronomic species. Our estimates of PT50-shoot for the five restoration grasses range from 41,528 to 120,082 mg Mn kg(-1). Measures of EC50-plant for these restoration grasses ranged from 877 to >6,000 mg Mn l(-1). These thresholds might be more useful for risk assessors than those based on crop plants that are widely used.     

Urease inhibition: a tool for toxicity identification in sediment elutriates

A method for the detection and confirmation of heavy metal toxicants in sediment elutriates based on a urease inhibition assay, ICP-AES analysis and EDTA chelation in the frame of toxicity identification evaluation (TIE) is presented. Zinc was identified as the major toxicant in pHstat elutriates of sediments of the river Saale (Germany). Implications of natural and anthropogenic chelating agents, which are frequently present in environmental samples, on toxicity confirmation of heavy metals based on the toxic unit approach are discussed.     

New passive samplers for chlorinated semivolatile organic pollutants in ambient air

Two new types of passive samplers were designed and tested on semivolatile organic compounds. The first type (a spiral-rod sampler) consists of a low-density polyethylene membrane acting as a permeation film and a silicone elastomer as the receiving material; the second (a stir-bar sampler) has the same membrane material but a polydimethylsiloxane-coated stir bar acting as the collector phase and installed radially symmetrically in the sampler. The advantages of the new samplers are their simple design, low costs, and their easy processing via thermodesorption coupled with capillary gas chromatography and mass selective detection. In both samplers, the uptake of selected analytes was integrative over exposure periods of up to 384 h. The sampling rates calculated from a laboratory calibration study using the chlorinated semivolatiles hexachlorobenzene, hexachlorocyclohexane isomers and polychlorinated biphenyls ranged from 88.1 ml h-1 for delta-hexachlorocyclohexane to 3443 ml h-1 for 2,2',5,5'-tetrachlorobiphenyl. A field trial at a hazardous waste dump near Bitterfeld, Germany, for up to 21 days combined with periodical determinations of air concentrations using low-volume sampling indicated that the new samplers can in principle be used in the field, although the sampling rates derived from the field results differed considerably from the laboratory findings. Nevertheless the preliminary results suggest that the new sampler types are promising for the long-term air monitoring of semivolatiles.     

Whole effluent assessment of industrial wastewater for determination of bat compliance

Background, aim and scope  

The applicability of the Whole Effluent Assessment concept for the proof of compliance with the “best available techniques” has been analysed with paper mill wastewater from Germany by considering its persistency (P), potentially bio-accumulative substances (B) and toxicity (T).     

Application of different RP-HPLC methods for the determination of the octanol/water partition coefficient of selected tetrachlorobenzyltoluenes.

Reversed-phase high-performance liquid chromatography (RP-HPLC) in both, isocratic and gradient elution mode (stationary phase: LiChrospher 100 RP-18; mobile phase: water/methanol or water/acetonitrile) was used for a renewed determination of octanol/water partition coefficients (Kow) of selected tetrachlorobenzyltoluene (TCBT) isomers. Reported Kow values identify this substance class as very hydrophobic but the data are relatively inconsistent. Based on a series of calibration runs with hydrophobic reference substances of different chemical structure at various eluent compositions we tested different approaches for the evaluation of isocratic retention factors (logk) and found substantial differences between the direct calibration procedure at special methanol volume fractions in the mobile phase (0.95-0.80) and the use of retention factors extrapolated to pure water as eluent (logkw). The logKow values obtained for the TCBTs with the latter approach are around 0.5 units higher and closer to literature data. The gradient elution experiments yield slightly better results compared to the isocratic direct calibration procedure, but not as good as the calibration with log kw. In addition, the use of the RP-HPLC retention factors for estimating sorption coefficients (Koc) of TCBT isomers is discussed.     

Pulsed gas injection: A minimum effort approach for enhanced natural attenuation of chlorobenzene in contaminated groundwater

Chlorobenzene-contaminated groundwater was used to assess pulsed gas sparging as a minimum effort aeration strategy to enhance intrinsic natural attenuation. In contrast to existing biosparging operations, oxygen was supplied at minimum rate by reducing the gas injection frequency to 0.33 day^?1. Field tests in a model aquifer were conducted in a 12 m long reactor, filled with indigenous aquifer material and continuously recharged with polluted groundwater over 3 years. The closed arrangement allowed yield balances, cost accounting as well as the investigation of spatial distributions of parameters which are sensitive to the biodegradation process. Depending on the injection frequency and on the gas chosen for injection (pure oxygen or air) oxygen-deficient conditions prevailed in the aquifer. Despite the limiting availability of dissolved oxygen in the groundwater, chlorobenzene degradation under oxygen-deficient conditions proved to be more effective than under conditions with dissolved oxygen being available in high concentrations.     

Plant and soil responses to biosolids application following forest fire

Soil stability and revegetation is a great concern following forest wildfires. Biosolids application might enhance revegetation efforts and enhance soil stability. In May 1997, we applied Metro Wastewater Reclamation District (Denver, CO, USA) composted biosolids at rates of 0, 5, 10, 20, 40, and 80 Mg ha(-1) to a severely burned, previously forested site near Buffalo Creek, CO to improve soil C and N levels and help establish eight native, seeded grasses. The soils on the site belong to the Sphinx series (sandy-skeletal, mixed, frigid, shallow Typic Ustorthents). Vegetation and soils data were collected for four years following treatment. During the four years following treatment, total plant biomass ranged from approximately 50 to 230 g m(-2) and generally increased with increasing biosolids application. The percentage of bare ground ranged from 4 to 58% and generally decreased with increasing biosolids rate. Higher rates of biosolids application were associated with increased concentrations of N, P, and Zn in tissue of the dominant plant species, streambank wheatgrass [Elymus lanceolatus (Scribn. & J.G. Sm) Gould subsp. lanceolatus], relative to the unamended, unfertilized control. At two months following biosolids application (1997), total soil C and N at soil depths of 0 to 7.5, 7.5 to 15, and 15 to 30 cm showed significant (P < 0.05) linear increases (r2 > 0.88) as biosolids rate increased. The surface soil layer also showed this effect one year after application (1998). For Years 2 through 4 (1999-2001) following treatment, soil C and N levels declined but did not show consistent trends. The increase in productivity and cover resulting from the use of biosolids can aid in the rehabilitation of wildfire sites and reduce soil erosion in ecosystems similar to the Buffalo Creek area.