A concept for simultaneous wasteland reclamation, fuel production, and socio-economic development in degraded areas in India: Need, potential and perspectives of Jatropha plantations

The concept of substituting bio‐diesel produced from plantations on eroded soils for conventional diesel fuel has gained wide‐spread attention in India. In recent months, the Indian central Government as well as some state governments have expressed their support for bringing marginal lands, which cannot be used for food production, under cultivation for this purpose. Jatropha curcas is a well established plant in India. It produces oil‐rich seeds, is known to thrive on eroded lands, and to require only limited amounts of water, nutrients and capital inputs. This plant offers the option both to cultivate wastelands and to produce vegetable oil suitable for conversion to bio‐diesel. More versatile than hydrogen and new propulsion systems such as fuel cell technology, bio‐diesel can be used in today's vehicle fleets worldwide and may also offer a viable path to sustainable transportation, i.e., lower greenhouse gas emissions and enhanced mobility, even in remote areas. Mitigation of global warming and the creation of new regional employment opportunities can be important cornerstones of any forward looking transportation system for emerging economies.     

美国和五大湖双边共同关注区域的白肚燕(双色树燕)雏鸟的有机污染状况

白肚燕，又名双色树燕，栖居于五大湖流域中27个双边共同关注区域(AOCs)，从2010年到2014年对其进行了污染物暴露风险评估，以协助管理者和监管者评估五大湖AOCs的污染状况。本文比较了AOCs和附近非AOCs雏鸟体内污染物浓度的差异。AOCs白肚燕雏鸟尸体中多氯联苯(PCB)和多溴联苯醚的含量分别为30%和33%，低于非AOCs的平均浓度。AOCs白肚燕雏鸟胃含物中多环芳烃(PAH)浓度和血浆中全氟化合物浓度分别为67%和64%，也低于非AOCs的平均浓度。但是与已有生殖效应记载的高PCB污染区相比，有些AOCs雏鸟尸体内的PCBs浓度只是存在小幅升高。一些AOCs食物中PAHs的浓度足够高以致引起可测量的生理响应。在AOCs中，全氟化合物全氟辛烷磺酸在血浆中的最高浓度出现在Raisin河(密歇根州，美国；几何平均数330 ng/mL)，但远低于预估毒性的参考值(1 700 ng/mL)。之前有研究报道雏鸟胃含物中PAH和PCB的浓度以及尸体中PCBs的含量与沉积物中污染物的含量显著相关，从而可加强白肚燕在评估沉积物污染生物有效性方面的应用。
精选自Thomas W. Custer, Christine M. Custer, Paul M. Dummer, Diana Goldberg, J. Christian Franson, Richard A. Erickson. Organic contamination in tree swallow (Tachycineta bicolor) nestlings at United States and binational Great Lakes areas of concern. Environmental Toxicology and Chemistry: Volume 36, Issue 3, pages 735–748, July 2017. DOI: 10.1002/etc.3598
详情请见http://onlinelibrary.wiley.com/wol1/doi/10.1002/etc.3598/full
     

Source attribution and quantification of benzene event emissions in a Houston ship channel community based on real-time mobile monitoring of ambient air

A mobile laboratory equipped with a proton transfer reaction mass spectrometer (PTR-MS) operated in Galena Park, Texas, near the Houston Ship Channel during the Benzene and other Toxics Exposure Study (BEE-TEX). The mobile laboratory measured transient peaks of benzene of up to 37 ppb_v in the afternoon and evening of February 19, 2015. Plume reconstruction and source attribution were performed using the four-dimensional (4D) variational data assimilation technique and a three-dimensional (3D) micro-scale forward and adjoint air quality model based on mobile PTR-MS data and nearby stationary wind measurements at the Galena Park Continuous Air Monitoring Station (CAMS). The results of inverse modeling indicate that significant pipeline emissions of benzene may at least partly explain the ambient concentration peaks observed in Galena Park during BEE-TEX. Total pipeline emissions of benzene inferred within the 16-km² model domain exceeded point source emissions by roughly a factor of 2 during the observational episode. Besides pipeline leaks, the model also inferred significant benzene emissions from marine, railcar, and tank truck loading/unloading facilities, consistent with the presence of a tanker and barges in the Kinder Morgan port terminal during the afternoon and evening of February 19. Total domain emissions of benzene exceeded corresponding 2011 National Emissions Inventory (NEI) estimates by a factor of 2–6.

Implications:?Port operations involving petrochemicals may significantly increase emissions of air toxics from the transfer and storage of materials. Pipeline leaks, in particular, can lead to sporadic emissions greater than in emission inventories, resulting in higher ambient concentrations than are sampled by the existing monitoring network. The use of updated methods for ambient monitoring and source attribution in real time should be encouraged as an alternative to expanding the conventional monitoring network.     

Outsourcing,trade, technology,and greenhouse gas emissions

Environmental Economics and Policy Studies - U.S. output has steadily outpaced the rise in greenhouse gas (GHG) emissions over the past several decades. The decoupling of these two trends...     

A statistical analysis of the carbon dioxide capture process

Post combustion carbon dioxide (CO₂) capture is one of the most commonly adopted technologies for reducing industrial CO₂ emissions, which is now an important goal given the widespread concern over global warming. Research on amine-based CO₂ capture has mainly focused on improving effectiveness and efficiency of the CO₂ capture process. Our research work focuses on studying the relationships among the significant parameters influencing CO₂ production because an enhanced understanding of the intricate relationships among the parameters involved in the process is critical for improving efficiency of the CO₂ capture process. This paper presents a statistical study that explores the relationships among parameters involved in the amine-based post combustion CO₂ capture process at the International Centre for CO₂ Capture (ITC) located in Regina, Saskatchewan of Canada. A multiple regression technique has been applied for analysis of data collected at the CO₂ capture pilot plant at ITC. The parameters have been carefully selected to avoid issues of multicollinearity, and four mathematical models among the key parameters identified have been developed. The models have been tested, and accuracy of the models is found to be satisfactory. The models developed in this study describe part of the CO₂ capture process and can help to predict performance of the CO₂ capture process at ITC under different conditions. Some results from a preliminary validation process will also be presented.     

Relationship of Destruction Parameters to the Destruction/Removal Efficiency of PCBs

The destruction/removal efficiency (DRE), and the ability to accurately measure it, is a function of the concentration of the chemical compound in the input waste, the incinerator design and operation, sampling methods, and the analytical procedures. All of these are interrelated. This paper discusses the basic DRE equation [DRE = W_In W_out)/W_in × 100] and how it relates to some of the other destruction parameters. Some example data from the literature are presented. While PCBs have been used as the example, the equations and graphs are equally valid for some other hazardous compounds (POHCs), with the substitution of the 99.99% DRE requirement in lieu of the 99.9999% DRE for PCBs. The use of the relationships discussed in this paper should allow incinerator operators to more efficiently plan demonstration test burns which will adequately demonstrate the DRE.     

Kinetics of carbon dioxide absorption into mixed aqueous solutions of MDEA and MEA using a laminar jet apparatus and a numerically solved 2D absorption rate/kinetics model

New comprehensive numerically solved 1D and 2D absorption rate/kinetics models have been developed, for the first time, to interpret the experimental kinetic data obtained with a laminar jet apparatus for the absorption of carbon dioxide (CO₂) in CO₂ loaded mixed solutions of mixed amine system of methyldiethanolamine (MDEA) and monoethanolamine (MEA). Three MDEA/MEA weight ratios ranging from 27/03 to 23/07, over a concentration range of 2.316–1.996 kmol/m³ for MDEA and of 0.490–1.147 kmol/m³ for MEA were studied. The models take into account the coupling between chemical equilibrium, mass transfer, and the chemical kinetics of all possible chemical reactions involved in the CO₂ reaction with MDEA/MEA solvent. The partial differential equations of the 1D model were solved by two numerical techniques; the finite difference method (FDM) based on in-house coded Barakat–Clark scheme and the finite element method (FEM) based on COMSOL software. The FEM comprehensive model was then used to solve the set of partial differential equations in the 2D cylindrical coordinate system setting. Both FDM and FEM produced very accurate results for both the 1D and 2D models, which were much better than our previously published simplified model. The reaction rate constant obtained for MEA blended into MDEA at 298–333 K was k_MEA = 5.127 × 10⁸ exp(−3373.8/T). In addition, the 2D model, for the first time, has provided the concentration profiles of all the species in both the radial and axial directions of the laminar jet, thereby enabling an understanding of the correct sequence in which the reaction steps involved in the reactive absorption of CO₂ in aqueous mixed amines occur.     

Policies for the Planning and Reclamation of Coal-mined Landscapes: An International Comparison

Governments differ significantly in their attempts to mitigate the effects of mining disturbance. The approaches of Australia, Canada and the United States are reviewed here, relative to coal-mining reclamation. State and provincial examples (Queensland, Alberta and Montana) are used to illustrate legislation and planning below the national level. This paper explores three main issues that contribute to coal-mining reclamation: governmental level of legislation and planning; legislative scope; and inter-governmental co-ordination. The legislative histories vary, but are young and evolving. All require the submission of a reclamation plan before granting mining permits, enforce reclamation standards by security deposits and contain provisions for non-compliance. Australia and Canada are only beginning to address reclamation planning at the national level, whereas the United States has done so since 1977. The relationship to the environmental impact assessment process is uneven across the three nations. The United States and Canada have a larger percentage of their mined landscapes in a reclamation process, due partly to more stringent regulation. Reclamation effectiveness seems to centre less on centralization versus decentralization, and more on comprehensive scope, preventive approaches and multi-level governmental co-ordination.     

THE IMPACT OF HIGH INTEREST RATES ON OPTIMUM MULTIPLE OBJECTIVE DESIGN OF SURFACE RUNOFF URBAN DRAINAGE SYSTEMS1

ABSTRACT. This research examines the impact of high rates of interest upon the least cost system design for urban drainage systems when water quality is a critical parameter. Results of examination of twelve alternative system designs in a case study watershed indicate the least cost study design is highly sensitive to the rate of interest, but not sensitive to the water quality parameters. When the high rates of interest currently prevalent are introduced into the model those systems which contain open channel collection components are selected as the least cost system. At low rates of interest pipeline collection components are selected as the least cost system. Holding pond components of system design are cost effective at several levels of water quality. They are neutral to the rate of interest so they are incorporated in least cost systems at all the levels of interest rates. The results of the study indicate that at the current high rates of interest open channel collection systems and holding ponds are cost effective system components to achieve selected levels of water quality in urban drainage system design.