Prenatal diagnosis of mosaicism for triploidy and trisomy 13

Mosaicism for trisomy 13 and triploidy was detected by amniocentesis performed at 18 weeks' gestation because of fetal anomalies. Pregnancy continued and a live-born male was delivered vaginally at 37 weeks. The infant had features common to both trisomy 13 and triploidy: intrauterine growth retardation (IUGR), small abnormal ears, cleft palate, and a small jaw. In addition, he had complete cutaneous syndactyly of fingers 3 and 4 and partial syndactyly of the toes, as seen in triploidy. Mixoploidy for trisomy 13 and triploidy was confirmed postnatally in blood, skin, and placenta. Examination of chromosome heteromorphisms and DNA markers suggested the presence of two maternal contributions in the triploid cell line. In addition, the extra chromosome 13 in the trisomic cell line was derived from the mother. Copyright © 2001 John Wiley & Sons, Ltd.     

Pitfalls in the prenatal diagnosis of peroxisomal β-oxidation defects by chorionic villus sampling

Variability in the level of expression of very long chain fatty acids (VLCFAs) is documented in cultured chorionic villus (CV) cells derived from two fetuses, one at risk for an unusual peroxisomal fatty acid β-oxidation defect, and the other at risk for the X-linked form of adrenoleucodystrophy (ALD). Cells from early subcultures of chorionic cells from both cases gave normal values for VLCFA ratios. The results for the fetus at risk for the β-oxidation defect were interpreted to indicate that the fetus was not affected; however, at birth, the infant was clinically and biochemically affected. In the case of the fetus at risk for X-linked ALD, although VLCFAs were normal in subculture 1, the levels of these fatty acids increased dramatically in subculture 3, suggesting an abnormal fetus. Termination of the pregnancy and subsequent biochemical and morphological follow-up confirmed that the fetus was indeed affected by ALD.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

An introduction to reverse logistics for environmental management: A new system to support sustainability and profitability

The private-sector marketplace has identified the reengineering of the structure and management of the supply chain as a great untapped business opportunity. In traditional supply chains poorly structured operational and financial decision making institutionalized the poor management of material resources. This nonoptimized management process results in the generation of impaired material resources, which leads to solid and hazardous waste, as well as additional operating costs throughout the supply chain. The way in which the marketplace is addressing the issue of impaired material resources is by transferring the ownership and liability of impaired resources from the customer back to the supplier. The marketplace is also implicitly saying that the supplier must redesign its products to eliminate/minimize waste, or if the supplier fails to accomplish this goal, the supplier will be forced to absorb the costs associated with managing impaired material resources. The ramifications of this change are truly of historical proportions. The utility of a material resource to create wealth has throughout the centuries almost always required its ownership. Ownership has also denoted that the owner accept any liabilities created by the material resource. This is now all about to change. To support this change, a vastly expanded infrastructure and new management systems will have to be developed. This article shows how to manage the supply chain and impaired material resources. The new system that will operationally and financially manage these changes as well as create new organizational decision-making drivers is Reverse Logistics Management (RLM).     

Nitrogen cycling through swine production systems: ammonia, dinitrogen, and nitrous oxide emissions

Ammonia (NH(3)) emissions from animal systems have become a primary concern for all of livestock production. The purpose of this research was to establish the relationship of nitrogen (N) emissions to specific components of swine production systems and to determine accurate NH(3) emission factors appropriate for the regional climate, geography, and production systems. Micrometeorological instrumentation and gas sensors were placed over two lagoons in North Carolina during 1997-1999 to obtain information for determining ammonia emissions over extended periods and without interfering with the surrounding climate. Ammonia emissions varied diurnally and seasonally and were related to lagoon ammonium concentration, acidity, temperature, and wind turbulence. Conversion of significant quantities of ammonium NH(4)(+) to dinitrogen gas (N(2)) were measured in all lagoons with the emission rate largely dependent on NH(4)(+) concentration. Lagoon NH(4)(+) conversion to N(2) accounted for the largest loss component of the N entering the farm (43% as N(2)); however, small amounts of N(2)O were emitted from the lagoon (0.1%) and from field applications (0.05%) when effluent was applied nearby. In disagreement with previous and current estimates of NH(3) emissions from confined animal feeding operation (CAFO) systems, and invalidating current assumptions that most or all emissions are in the form of NH(3), we found much smaller NH(3) emissions from animal housing (7%), lagoons (8%), and fields (2%) using independent measurements of N transformation and transport. Nitrogen input and output in the production system were evaluated, and 95% of input N was accounted for as output N from the system.     

Ammonia emissions from swine houses in the southeastern United States

Ammonia (NH3) from confined animal feeding operations is emitted from several sources including lagoons, field applications, and houses. This paper presents studies that were conducted to evaluate NH3 emissions from swine finisher and sow animal houses in the southeastern USA. Management and climate variables including animal weight, feed consumption, housing gutter water temperature, total time fans operated per day, house air temperature, house ambient NH3 concentration, and animal numbers were measured to determine their individual and combined effect on NH3 emissions. Ammonia emissions varied on daily and seasonal bases with higher emissions during warmer periods. For finishers, the summertime housing emissions on a per-animal basis were 2.4 times higher than wintertime (7.0 vs. 3.3 g NH3 animal(-1) d(-1)) or 3.2 times higher when compared on an animal unit (AU) basis (1 AU = 500 kg) because of climate and animal size differences between measurement periods. For summertime, the emission factor for the finishing pigs was 7.8 times higher than for sows on an animal basis and 25.6 times higher on an AU basis. Simple models were developed for housing emissions based on (i) all measured factors that were independent of each other and (ii) on three commonly measured management factors. The two models explained 97 and 64%, respectively, of variations in emissions. Ammonia emissions were found to be somewhat less than other studies on the same type housing due to more representative housing concentration measurements and calibration of exhaust fans; thus, emission factors for these type houses will be less than previously thought.     

Mutagenic and carcinogenic potency of extracts of diesel and related environmental emissions: Study design, sample generation, collection, and preparation

A major diesel emissions research program has been initiated by the U.S. Environmental Protection Agency to assess the human health risk associated with increased use of diesel automobiles. This program is intended to establish the mutagenic and carcinogenic potency of complex organics associated with diesel particles as well as comparative particle-bound organics from other environmental emissions for which human epidemiological data are available. The mobile source samples selected for this study were collected from a heavy-duty diesel engine, a series of light-duty diesel passenger cars, and a gasoline catalyst automobile. The comparative source samples incorporated into the study were cigarette smoke condensate, coke oven emissions, roofing tar emissions, and benzo(a)pyrene. The samples were tested using three mutagenic assays and four carcinogenic assays as prescribed by a test matrix. This report describes the study design, particle generation, and sample collection and preparation. A brief summary of the bioassays is also included.     

Aliphatic hydrocarbons and polycyclic aromatic hydrocarbons (PAHs) in sediments collected from the 110 mile hole and along a transect from 58 degrees 58.32'N 1 degree 10.38'W to the inner Moray Firth,Scotland

Sediments were collected from the 110 mile hole and along a transect from 58 degrees 58.32' N 1 degree 10.38' W to the UK National Marine Monitoring (NMMP) site in the inner Moray Firth, for determination of hydrocarbon concentration and composition. Total PAH concentrations (2- to 6-ring PAHs, parent and branched) were highest at NMMP site 95 and at the associated end of the transect in the inner Moray Firth. PAHs in this area were of predominately pyrolytic origin and could be attributed to urban and industrial activities. The majority of sediments collected in the middle section of the transect had low total PAH concentrations (< 100 ng g(-1) dry weight). The high proportion of naphthalenes and alkylated PAHs in this area suggested a predominately petrogenic input. The GC-FID aliphatic hydrocarbon profiles showed that the majority of sediments, including those in the inner Firth, had a limited petrogenic input. This was supported by the geochemical biomarker profiles, which contained triterpanes typical of Middle Eastern crude oil. Principal component analysis was used to investigate spatial trends in the PAH distributions and demonstrated that there were differences between areas. The NMMP site 95 and transect start and middle sediments were well separated. PCA further confirmed that sediments from the NMMP site 95, the 110 mile hole and the inner Moray Firth (south west) end of the transect contained PAHs from predominately pyrolytic sources, whereas sediments from the north east end (start) and the middle of the transect were typified by a greater petrogenic component.