Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

Analysis of radiocaesium in the Lebanese soil one decade after the Chernobyl accident

Fallout from the Chernobyl reactor accident due to the transport of a radioactive cloud over Lebanon in the beginning of May 1986 was studied 12 years after the accident for determining the level of (137)Cs concentration in soil. Gamma spectroscopy measurements were performed by using coaxial high sensitivity HPGe detectors. More than 90 soil samples were collected from points uniformly distributed throughout the land of Lebanon in order to evaluate their radioactivity. The data obtained showed a relatively high (137)Cs activity per surface area contamination, up to 6545Bqm(-2) in the top soil layer 0-3cm. The average activity of (137)Cs in the top soil layer 0-3cm in depth was 59.7Bqkg(-1) dry soil ranging from 15 to 119Bqkg(-1) dry soil. The horizontal variability was found to be about 45% between the sampling sites. The depth distribution of total (137)Cs activity in soil showed an exponential decrease. Estimation of the annual effective dose due to external radiation from (137)Cs contaminated soil for selected sites gave values ranging from 19.3 to 91.6 micro Svy(-1).     

Myco- and phyco-remediation of polychlorinated biphenyls in the environment: a review

Environmental Science and Pollution Research - Polychlorinated biphenyls (PCBs) are toxic organic compounds and pose serious threats to environment and public health. PCBs still exist in different...     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

Assessing the economic value of urban green spaces in Kuala Lumpur

Environmental Science and Pollution Research - This study assessed the economic value of public urban green spaces (UGSs) in Kuala Lumpur (KL) city by using the hedonic price method (HPM). It...     

Comparing theoretical and actual feasibility of transferring management of river lift irrigation systems in Sudan

This article focuses on agricultural production in lift irrigation schemes along the White Nile in the Sudan. A comparison is drawn between the theoretical forecast and actual practical experience regarding the feasibility of transferring management from government-run parastatal organizations to private farmer organizations. Although the theoretical model indicates that farmers should be able to cover the cost of managing the river lift irrigation systems, field data show, however, that farmers growing wheat are barely able to break even. Even assuming a doubling of the present wheat yields, the cash surplus earned would only suffice for fuel to operate the pumps. Under these circumstances, it is not surprising that, contrary to government expectations, the private sector has been unenthusiastic about taking over management of White Nile river lift schemes. The lessons that emerge from this study indicate that unplanned and rapid withdrawal of state management can lead to negative results. The transfer of management responsibility for the river pumps does not appear to influence economic performance considerably, which depends on the wider context of the country's economic, political and institutional environment, within which the agricultural sector functions.     

Factors influencing the implementation of a safety management system for construction sites

The objective of the study was to determine the influential safety factors that governed the success of a safety management system for construction sites. The number of incidences among construction workers and the level of awareness on matters concerning safety were also determined. The study involved a self-administered three-part questionnaire among the workers and interviews with industry experts involved in brick-laying, concreting and in related assorted trades. Part A of the questionnaire concerned personal particulars, Part B involved training and experience and Part C was based on 28 industry-accepted safety factor elements. The construction sites ranged from high rise buildings, landed houses and infrastructure renovation. The sample size was 275. From the survey it was found that the most influential safety factor was personal awareness followed closely by communication. Suggestions and recommendations on equipment design and improved work practices and procedures to improve the efficiency and productivity of construction workers were proposed. Management was urged to get their workers better informed about safety matters.     

Natural radioactivity measurements in building materials in Southern Lebanon

Using gamma-spectroscopy and CR-39 detector, concentration C of naturally occurring radioactive nuclides (226)Ra, (222)Rn, (214)Bi, (228)Ac, (212)Pb, (212)Bi and (40)K, has been measured in sand, cement, gravel, gypsum, and paint, which are used as building materials in Lebanon. Sand samples were collected from 10 different sandbank locations in the southern part of the country. Gravel samples of different types and forms were collected from several quarries. White and gray cement fabricated by Shaka Co. were obtained. gamma-spectroscopy measurements in sand gave Ra concentration ranging from 4.2+/-0.4 to 60.8+/-2.2 Bq kg(-1) and Ra concentration equivalents from 8.8+/-1.0 to 74.3+/-9.2 Bq kg(-1). The highest Ra concentration was in gray and white cement having the values 73.2+/-3.0 and 76.3+/-3.0 Bq kg(-1), respectively. Gravel results showed Ra concentration between 20.2+/-1.0 and 31.7+/-1.4 Bq kg(-1) with an average of 27.5+/-1.3 Bq kg(-1). Radon concentration in paint was determined by CR-39 detector. In sand, the average (222)Rn concentration ranged between 291+/-69 and 1774+/-339 Bq m(-3) among the sandbanks with a total average value of 704+/-139 Bq m(-3). For gravel, the range was found to be from 52+/-9 to 3077+/-370 Bq m(-3) with an average value of 608+/-85 Bq m(-3). Aerial and mass exhalation rates of (222)Rn were also calculated and found to be between 44+/-7 and 2226+/-267 mBq m(-2)h(-1), and between 0.40+/-0.07 and 20.0+/-0.3 mBq kg(-1)h(-1), respectively.     

Can clean biomass energy use lower CO2 emissions in African economies? Empirical evidence from dynamic long-run panel framework

Environmental Science and Pollution Research - This paper seeks to answer an empirical question of whether clean biomass energy consumption lowers CO2 emissions while controlling for technical...     

Synthesis of magnetite-based nanocomposites for effective removal of brilliant green dye from wastewater

Environmental Science and Pollution Research - The present study aims at evaluating the batch scale potential of cotton shell powder (CSP), Moringa oleifera leaves (ML), and magnetite-assisted...