Variability in environmental impacts of Brazilian soybean according to crop production and transport scenarios

Soybean production and its supply chain are highly dependent on inputs such as land, fertilizer, fuel, machines, pesticides and electricity. The expansion of this crop in Brazil in recent decades has generated concerns about its environmental impacts. To assess these impacts, two representative chains supplying soybeans to Europe were identified: Center West (CW) and Southern (SO) Brazil. Each supply chain was analyzed using Life Cycle Assessment methodology. We considered different levels of use of chemical and organic fertilizers, pesticides and machinery, different distances for transportation of inputs and different yield levels. Because transportation contributed strongly to environmental impacts, a detailed study was performed to identify the routes used to transport soybeans to seaports. Additionally, we considered different levels of land occupation and land transformation to represent the impact of deforestation in the CW region. Environmental impacts were calculated for 1000 kg of soybean up to and including the delivery to Europe at the seaport in Rotterdam, at 13% humidity. Overall results showed that the impacts are greater for CW than for SO for all impact categories studied, including acidification (7.7 and 5.3 kg SO₂ eq., respectively), climate change (959 and 510 kg CO₂ eq.), cumulative energy demand (12,634 and 6,999 MJ) and terrestrial ecotoxicity (4.9 and 3.1 kg 1,4-DCB eq.), except eutrophication and land occupation. The same trend was observed for the crop-production stage. Efforts to reduce chemical fertilizers and diesel consumption can reduce CO₂ emissions. Although deforestation for crop production has decreased in recent years, the contribution of deforestation to climate change and cumulative energy demand remains significant. In the CW scenario deforestation contributed 29% to climate change and 20% to cumulative energy demand. Results also showed that although there are different transportation options in Brazil, the current predominance of road transport causes severe environmental impacts. In CW, road transport contributed 19% to climate change and 24% to cumulative energy demand, while in SO it contributed 12% and 15% to these impacts, respectively. Improvements in the logistics of transportation, giving priority to rail and river transports over road transport, can contribute significantly to reducing greenhouse gas emissions and decreasing energy use. Future studies involving Brazilian soybeans should take into account the region of origin as different levels of environmental impact are predicted.     

Applications of life cycle assessment and cost analysis in health care waste management

The establishment of rules to manage Health Care Waste (HCW) is a challenge for the public sector. Regulatory agencies must ensure the safety of waste management alternatives for two very different profiles of generators: (1) hospitals, which concentrate the production of HCW and (2) small establishments, such as clinics, pharmacies and other sources, that generate dispersed quantities of HCW and are scattered throughout the city. To assist in developing sector regulations for the small generators, we evaluated three management scenarios using decision-making tools. They consisted of a disinfection technique (microwave, autoclave and lime) followed by landfilling, where transportation was also included. The microwave, autoclave and lime techniques were tested at the laboratory to establish the operating parameters to ensure their efficiency in disinfection. Using a life cycle assessment (LCA) and cost analysis, the decision-making tools aimed to determine the technique with the best environmental performance. This consisted of evaluating the eco-efficiency of each scenario. Based on the life cycle assessment, microwaving had the lowest environmental impact (12.64 Pt) followed by autoclaving (48.46 Pt). The cost analyses indicated values of US$ 0.12 kg^?1 for the waste treated with microwaves, US$ 1.10 kg^?1 for the waste treated by the autoclave and US$ 1.53 kg^?1 for the waste treated with lime. The microwave disinfection presented the best eco-efficiency performance among those studied and provided a feasible alternative to subsidize the formulation of the policy for small generators of HCW.     

How does eliminating mercury from artisanal and small-scale gold mining lead to achieving sustainable development goals?

Artisanal and small-scale gold mining (ASGM) is the principal anthropogenic activity that globally contributes to overloading our environment with mercury. Although the Minamata Convention, led by the United Nations, is a crucial instrument to eliminate its use progressively, novel approaches to accelerate this difficult transition are welcome. This article proposes a framework for policy-making or improvement, fostering the enforcement of mercury elimination through the lens of the 17 Sustainable Development Goals (SDGs), focusing on the excluded artisanal and small-scale gold miners and their dependents. We move forward with a literature review of the Artisanal and Small Mining topic, taking each SDG as a unit of analysis. Understanding the problem as a puzzle of four sets of pieces, namely: (1) social, (2) environmental, (3) economic, and (4) institutional, the paper offers potential opportunities for the decision-makers and practitioners to accelerate the substitution of this heavy metal and develop sustainable futures for the ASGM communities. We conclude by proposing a pragmatic framework that synthesizes the means, actions, and ends to accelerate a sustainable transition.     

Influence of water hardening of the chorion on cadmium accumulation in medaka (Oryzias latipes) eggs

This report describes a study in which in vitro fertilization methods were used to expose medaka (Oryzias latipes) eggs to cadmium (Cd(2+)). This approach was applied to address the differential sensitivity and cumulative potential of Cd(2+) when exposure was initiated early (before fertilization and water hardening of the chorion) versus later during embryo development (i.e., well after the chorion has undergone water hardening). Following range finding exposures (2.5, 10, 20, 40 or 80 mg/l) under artificially controlled experimental procedures, results from hatching success and embryo malformations showed the earlier exposure interval more sensitive than the assay involving only the embryonated egg. Subsequent accumulation studies have shown that the exposure initiated before fertilization apparently led to more Cd(2+) deposition in the chorion compared to the exposure during embryonated stages of the eggs. Similarly, values for total Cd(2+) indicated higher concentrations in those eggs exposed prior to--and during--water hardening. Results suggest an alteration of the properties of the zona radiata in the early-stage eggs, making it more permeable to the potential exit or entrance of waterborne agents even after water hardening. Ongoing studies must now address the development of more realistic exposure conditions of the gametes by using incubation media with osmolarities similar to surface waters, and by shortening duration for gamete exposure. Also, sensitive methods to localize Cd(2+) and to delineate the transfer from the chorion to the embryo are needed.     

<Emphasis Type="Italic">Bonitasaura salgadoi</Emphasis> gen. et sp. nov.: a beaked sauropod from the Late Cretaceous of Patagonia

Ornithischian and theropod dinosaurs were morphologically diverse during the Cretaceous. In contrast, sauropods were relatively more conservative. The anatomy of Bonitasaura salgadoi, a new 9-m titanosaurian sauropod from Upper Cretaceous beds of Patagonia, suggests that sauropod anatomical diversity would have included unexpected items. Its unusual, rectangular lower jaw possesses narrow, anteriorly restricted teeth and shows evidence of a sharp keratinous sheath over the non-dentigerous region that probably worked to guillotine plant material. This discovery definitely demonstrates that titanosaurs acquired a mandibular configuration similar to that of some basal diplodocoids, as had already been suggested by the lower jaw of the controversial genus Antarctosaurus. This oral configuration, plus the beak-like structure and the skull shape, resemble some traits more commonly seen in Laurasian ornithischians, mostly unexpressed in southern continents. A high sauropod morphological diversity seems to be in agreement with the poorly represented ornithischian clades of the southern hemisphere.Communicated by G. Mayr     

Why are Prices in Wild Catch and Aquaculture Industries so Different?

Through a comparative analysis of prices in capture fisheries and aquaculture sectors, the objectives of this paper are a) to investigate three the trends in prices of forage catches to feed the aquaculture species, b) to analyze the amount of fish species need to feed aquaculture species in order to assess the level of efficiency in resource use, and c) to examine the degree of economic concentration either in wild-catch industry and aquaculture sectors. The results show that prices of cultivated species are higher than prices of the same species when harvested from the sea. We explain this fact by the interplay of three forces. First, the amount of wild fish to feed aquaculture species continues to improve over time. Second, the pressure of fishing activities has not been reduced since catches of most forage fishes are declining, which induce higher prices of capture species that feed aquaculture production. Third, the level of seafood market concentration is significantly higher in aquaculture than in wild catches, which generates higher prices in aquaculture.     

Analysis of lipid peroxidation in animal and plant tissues as field-based biomarker in Mediterranean irrigated agroecosystems (Extremadura,Spain)

ABSTRACT

The development of field-based biomarkers can allow for a more reliable assessment of the exposure of organisms to pollutants. Different sampling sites, along two streams running through an irrigable agricultural area, were selected to evaluate the effect of agrochemical load on the measured endpoints. The levels of lipid peroxidation were evaluated in several organs of Procambarus clarkii. The same method was applied to leaves of two woody species. Determining levels of MDA (malonaldehyde) by thiobarbituric acid reactive substances assay allows measuring the levels of lipid peroxidation. Differences in lipid peroxidation levels were observed in P. clarkii individuals collected at different sites; however, the patterns varied depending on the organ (when accounting for variations due to sex). The use of a MDA-gills/MDA-hepatopancreas index allowed for discrimination between reference and polluted sites. Significant differences in oxidative damage between sites were found in the leaves of Quercus rotundifolia but not in Salix sp. The lipid peroxidation of crayfish organs and holm oak leaves as a suitable biomarker of environmental pollution deserves further investigation.     

Distal impacts of aquarium trade: Exploring the emerging sandhopper (<Emphasis Type="Italic">Orchestoidea tuberculata</Emphasis>) artisanal shore gathering fishery in Chile

Artisanal fishery activities support the livelihoods of millions of people worldwide, particularly in developing countries. Within these fisheries, distal global drivers can promote switching between alternative target resources. These drivers can promote the rapid development of new, unregulated and previously unexploited fisheries that pose a threat to the sustainability of ecosystems. In this paper, we describe a new artisanal shore gathering activity that targets a previously unexploited resource: the sandhopper (Orchestoidea tuberculata). The activity is driven by aquarium trade demand for food. We used mixed methods to describe the activity, assessed basic socio-economic incentives, and estimated Catches per Unit Effort. Results show that the sandhopper plays an important role for the livelihoods of shore gatherers engaged in the activity. Gatherers have adapted and developed two main extraction methods with different degrees of investment and extraction rates. Furthermore, gatherers have developed local knowledge regarding the ecology and management of the resource. Results show that economic incentives can motivate a rapid expansion of this unregulated activity. Future research gaps and management options to address the development of this fishery are discussed in light of these findings.