Metal concentrations in used engine oils: Relevance to site assessments of soils

Used engine oils contain metals, which upon entering soils may pose risks to human health or the environment. In this study, previously published concentrations of 23 metals in 213 used engine oil samples from the early 1970s to the mid-1990s are statistically evaluated. Neat (100%) used engine oils were found to contain relatively high concentrations of lead, calcium, and zinc, attributable to piston blow-by of leaded gasoline, calcium salt detergent additives, and zinc-bearing anti-corrosion/anti-oxidation additives, respectively. Wear metal concentrations were lower. The lead concentration in used engine oils in the U.S. declined between the 1970s and early 1990s, potentially providing a basis to constrain the “age” of used engine oil(s) in soils. The concentrations of 23 metals in used engine oils were compared to soil risk benchmarks in 15 representative jurisdictions in the U.S., Canada, Australia, and Europe. The maximum concentrations in neat (100%) used engine oil of eight metals – Be, Co, Fe, Mn, Ni, Se, Ag, and Ti – were lower than their collective minimum benchmarks in soils for the jurisdictions surveyed, indicating their concentrations in soils could not be reasonably expected to exceed any soil benchmarks. Nine metals (As, Ba, Cd, Cr, Cu, Pb, Sn, V and Zn), but particularly arsenic, cadmium, lead, tin, and zinc, were identified as potential contaminants of concern (PCOC) for soils from locations impacted with used engine oils, owing to their higher median concentrations (i.e., 2.5, 1.4, 1038, 5.0, and 922 mg/kg in oil, respectively) relative to most soil benchmarks. Site-specific benchmarks and metal concentrations at reasonable oil in soil concentrations require consideration when developing the suite of PCOC metal analytes for conducting site assessments of soils impacted by used engine oil.     

Assessment of semi-natural habitats and landscape features on Irish farmland: New insights to inform EU Common Agricultural Policy implementation

Concerns over the loss of biodiversity and ecosystem services in farmland have prompted the development of agri-environment policy measures aimed at reducing farming pressure and maintaining semi-natural habitats in farmed landscapes. However, further knowledge is needed to guarantee successful agri-environment measures implementation. The current study assessed the quantity and the quality of semi-natural habitats in farms across a gradient of farming intensities in two contrasting regions in Ireland. Policy protection seemed fundamental for semi-natural habitats preservation. Habitats not protected by agricultural policy relied on extensive farming and are in danger of disappearing if they are intensified or abandoned. Due to the lack of policy incentives for habitat quality, no correlations were found between farming intensity and share of semi-natural habitats with habitat quality. Therefore, extensive farming and retention of habitats alone may not reverse the decline of farmland quality and biodiverisity and, thus, measures incentivising the environmental quality may be more successful.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01344-6) contains supplementary material, which is available to authorized users.     

A preliminary examination of the translocation of microencapsulated cyfluthrin following applications to the perimeter of residential dwellings

Abstract

Methods have been developed to monitor the translocation of microencapsulated cyfluthrin following perimeter applications to residential dwellings. A pilot study was implemented to determine both the potential for application spray to drift away from dwellings and the intrusion of residues into homes following perimeter treatments. Residential monitoring included measuring spray drift using cellulose filter paper and the collection of soil samples from within the spray zone. In addition, interior air was monitored using fiberglass filter paper as a sorbent medium and cotton ball swabs were used to collect surface wipes.

Fortification of matrixes resulted in recoveries of >90%. Spray drift was highest at the point of application and declined to low but measurable levels 9.1m from the foundations of dwellings. Soil residues declined to low, but measurable levels by 45 days post‐application. No cyfluthrin was measured from indoor air; however, some interior surfaces had detectable levels of cyfluthrin until three days post‐application.

Findings indicate that spray drift resulting from perimeter applications might contaminate non‐target surfaces outside the spray zone. Soil borne residues may serve as persistent sources for human exposure and potentially intrude into dwellings through the activities of occupants and pets. Residues do not appreciably translocate through air and consequently inhalation is not a likely route for human exposure. Surface residues detected indoors suggest that the physical movement of residues from the exterior to the interior might be a viable route of movement of residues following this type of application.     

SOIL-SOILN simulations of water drainage and nitrate nitrogen transport from soil core lysimeters

Water resources protection from nitrate nitrogen (NO3-N) contamination is an important public concern and a major national environmental issue. The abilities of the SOIL-SOILN model to simulate water drainage and nitrate N fluxes from orchardgrass (Dactylis glomerata L.) were evaluated using data from a 3-yr field experiment. The soil is classified as a Hagerstown silt loam soil (fine, mixed, semiactive, mesic Typic Hapludalf). Nitrate losses below the 1-m depth from N-fertilized grazed orchardgrass were measured with intact soil core lysimeters. Five N-fertilizer treatments consisted of a control, urine application in the spring, urine application in the summer, urine application in the fall, and feces application in the summer. The SOIL-SOILN models were evaluated using water drainage and nitrate flux data for 1993-1994, 1994-1995, and 1995-1996. The N rate constants from a similar experiment with inorganic fertilizer and manure treatments under corn (Zea mays L.) were used to evaluate the SOILN model under orchardgrass sod. Results indicated that the SOIL model accurately simulated water drainage for all three years. The SOILN model adequately predicted nitrate losses for three urine treatments in each year and a control treatment in 1994-1995. However, it failed to produce accurate simulations for two control treatments in 1993-1994 and 1995-1996, and feces treatments in all three years. The inaccuracy in the simulation results for the control and feces treatments seems to be related to an inadequate modeling of N transformation processes. In general, the results demonstrate the potential of the SOILN model to predict NO3-N fluxes under pasture conditions using N transformation rate constants determined through the calibration process from corn fields on similar soils.     

Repellent scent-marking of flowers by a guild of foraging bumblebees (Bombus spp.)

We have found that foraging bumblebees (Bombus hortorum, B. pascuorum, B. pratorum and B.␣terrestris) not only avoid flowers of Symphytum officinale that have recently been visited by conspecifics but also those that have been recently visited by heterospecifics. We propose that the decision whether to reject or accept a flower is influenced by a chemical odour that is left on the corolla by a forager, which temporarily repels subsequent foragers. Honeybees and carpenter bees have previously been shown to use similar repellent forage-marking scents. We found that flowers were repellent to other bumblebee foragers for approximately 20 min and also that after this time nectar levels in S. officinale flowers had largely replenished. Thus bumblebees could forage more efficiently by avoiding flowers with low rewards. Flowers to which extracts of tarsal components were applied were more often rejected by wild B. terrestris workers than flowers that had head extracts applied, which in turn were more often rejected than flowers that had body extracts applied. Extracts from four Bombus species were equally repellent to foragers. The sites of production of the repellent scent and its evolutionary origins are discussed. Received: 24 November 1997 / Accepted after revision: 8 March 1998     

First trimester diagnosis of lesch-nyhan syndrome: Applications to other disorders of purine metabolism

The prenatal detection of hypoxanthine phosphoribosyltransferase (HPRT, EC 2.4.2.8) deficiency, the Lesch-Nyhan syndrome, during the first trimester of an affected pregnancy through the use of chorionic villus sampling is reported. Quantitation of reaction products formed by villus cell extracts from exogenous hypoxanthine-8-[¹⁴C] or adenine-8-[¹⁴C] is used in diagnosis. We report the diagnosis of Lesch-Nyhan syndrome using a chorionic villus specimen and confirmation of that diagnosis. In addition, adenosine deaminase (ADA) and purine nucleoside phosphorylase (PNP), enzymes deficient in inherited immune disorders, are detected in chorionic villus samples. These heritable disorders also appear amenable to early prenatal diagnosis.     

The influence of nectar secretion rates on the responses of bumblebees (Bombus spp.) to previously visited flowers

Bumblebees can avoid recently depleted flowers by responding to repellent scent-marks deposited on flower corollas by previous visitors. It has previously been suggested that avoidance of visited flowers for a fixed period would be a poor strategy, since different plant species vary greatly in the rate at which they replenish floral rewards. In this study, we examined the duration of flower repellency after an initial bumblebee visit, using wild bumblebees (Bombus lapidarius, B. pascuorum and B. terrestris) foraging on four different plant species (Lotus corniculatus, Melilotus officinalis, Phacelia tanacetifolia and Symphytum officinale). We constructed a model to predict flower visitation following an initial visit, based on the nectar secretion pattern of the different plant species, the insect visitation rate per flower, and the search and handling times of bumblebees foraging on the plant species in question. The model predicts an optimal duration of flower avoidance which maximises the rate of reward acquisition for all bees. However, this optimum may be open to cheating. For two plant species, the evolutionary stable strategy (ESS) is a shorter duration of flower avoidance than the optimum. We found the duration of flower avoidance was markedly different among flower species and was inversely related to nectar secretion rates. The predicted ESSs for each plant species were close to those observed, suggesting that the key parameters influencing bumblebee behaviour are those included in the model. We discuss how bees may alter the duration of their response to repellent scents, and other factors that affect flower re-visitation.     

The distribution of chlorpyrifos following a crack and crevice type application in the US EPA Indoor Air Quality Research House

A study was conducted in the US EPA Indoor Air Quality (IAQ) Research House to determine the spatial and temporal distribution of chlorpyrifos following a professional crack and crevice application in the kitchen. Following the application, measurements were made in the kitchen, den and master bedroom over 21 days. Airborne concentrations were collected using both polyurethane foam (PUF) and the OSHA versatile sampler composed of XAD and PUF media located in tandem. Measured airborne concentrations were similar for the two samplers and were higher in the three rooms following the application. The highest measured concentrations were reached during the initial 24-h following application; concentrations subsequently declined over the 21-day study period to levels slightly above background. Spatial and temporal distributions onto surfaces were measured using 10-cm² rayon deposition coupons located on the floor. Sections were cut from existing carpet to determine the total extractable residues. Chlorpyrifos was measured from all matrixes in the kitchen, den and bedroom and the data shows the transport of airborne residues from the point of application to remote locations in the house. The findings are compared and discussed relative to another study conducted in which total release aerosols containing chlorpyrifos were activated in the IAQ research house and the resulting distributions evaluated. For both studies dose estimates were constructed for the exposure pathways using the Stochastic Human Exposure and Dose Estimation Model for pesticides.The United States Environmental Protection Agency has been mandated to examine children's exposure to environmental pollutants such as pesticides. This research specifically reduces uncertainties associated with estimating children's potential exposures to residentially applied pesticides and provides inputs to further evaluate and validate residential exposure models which might be used to reduce exposures and perform risk assessments.     

Establishment of a cross-European field site network in the ALARM project for assessing large-scale changes in biodiversity

The field site network (FSN) plays a central role in conducting joint research within all Assessing Large-scale Risks for biodiversity with tested Methods (ALARM) modules and provides a mechanism for integrating research on different topics in ALARM on the same site for measuring multiple impacts on biodiversity. The network covers most European climates and biogeographic regions, from Mediterranean through central European and boreal to subarctic. The project links databases with the European-wide field site network FSN, including geographic information system (GIS)-based information to characterise the test location for ALARM researchers for joint on-site research. Maps are provided in a standardised way and merged with other site-specific information. The application of GIS for these field sites and the information management promotes the use of the FSN for research and to disseminate the results. We conclude that ALARM FSN sites together with other research sites in Europe jointly could be used as a future backbone for research proposals.     

Efficacy of alum and coal combustion by-products in stabilizing manure phosphorus

Animal manures contain large amounts of soluble phosphorus (P), which is prone to runoff losses when manure is surface-applied. Here we report the efficacy of alum and three coal combustion by-products in reducing P solubility when added to dairy, swine, or broiler litter manures in a laboratory incubation study. Compared with unamended controls, alum effectively reduced readily soluble P, determined in water extracts of moist manure samples with 1 h of shaking, for all three manures. The reduction ranged from 80 to 99% at treatment rates of 100 to 250 g alum kg(-1) manure dry matter. The fluidized bed combustion fly ash (FBC) reduced readily soluble P by 50 to 60% at a rate of 400 g kg(-1) for all three manures. Flue gas desulfurization by-product (FGD) reduced readily soluble P by nearly 80% when added to swine manure and broiler litter at 150 and 250 g kg(-1). Another by-product, anthracite refuse fly ash (ANT), was ineffective for all three manures. In all cases, reduction in readily soluble P is primarily associated with inorganic phosphorus (P(i)) with little change in organic phosphorus (P(o)). Sequential extraction results indicate that the by-product treatments shifted manure P from H2O-P into a less vulnerable fraction, NaHCO3 - P, while the alum treatment shifted the P into even more stable forms, mostly NaOH-P. Such shifts in P fractions would have little influence on P availability for crops over the long-term but would retard and reduce potential losses of P following manure applications.