A Marine Pollution Study of Northeast Coastal Water Off Taiwan Island

The coastal water of northeast Taiwan island, called 'Yin-Yang Hai' for its distinct yellow colour compared with blue offshore water, was investigated from 1989 to 1990 by the authors. Biological study showed the dominant species of plankton to be Copepoda, Cladocera, planktonic eggs and Diatoma. Dominant species of benthos were young crabs, Amphipoda and Annelida, with Amphipoda usually occurring in heavily polluted areas. Heavy metal data showed that the concentration of copper was high. the copper and iron concentration in algae of the intertidal zone was also high. the concentrations of iron and copper in inshore water were also higher than in offshore water. By comparison of the pH and salinity distribution of this area, we conclude that this coastal water has been polluted by acid waste water from coastal industry. the suspended solids concentration in sea water is high. Flocculation occurring at the boundary of fresh and saline water might be a reason for the distinct yellow colour of the water of this area. Further study is required.     

Kinetic studies on the adsorption of phenol, 4-chlorophenol,and 2,4-dichlorophenol from water using activated carbons

This study uses rate parameters in pseudo-first-order (PFO) and pseudo-second-order (PSO) equations (k₁ and k₂q_e, respectively) to judge the extent for approaching equilibrium in an adsorption process. Out of fifty-six systems collected from the literature, the adsorption processes with a k₂q_e value between 0.1 and 0.8 min^?1 account for as much as 70% of the total. These are classified as fast processes. This work compares the validity of PFO and PSO equations for the adsorption of phenol, 4-chlorophenol (4-CP), and 2,4-dichlorophenol (2,4-DCP) on activated carbons prepared from pistachio shells at different NaOH/char ratios. The activated carbons, recognized as microporous materials, had a surface area ranging from 939 to 1936 m²/g. Findings show that the adsorption of phenol, 4-CP, and 2,4-DCP on activated carbons had a k₂q_e value of 0.15–0.58 min^?1, reflecting the fast process. Evaluating the operating time by rate parameters revealed that k₂q_e was 1.6–1.8 times larger than k₁. These findings demonstrate the significance of using an appropriate kinetic equation for adsorption process design.     

Operational characteristics of effective removal of H2S and NH3 waste gases by activated carbon biofilter

Simultaneous removal of hydrogen sulfide (H2S) and ammonia (NH3) gases from gaseous streams was studied in a biofilter packed with granule activated carbon. Extensive studies, including the effects of carbon (C) source on the growth of inoculated microorganisms and gas removal efficiency, product analysis, bioaerosol emission, pressure drop, and cost evaluation, were conducted. The results indicated that molasses was a potential C source for inoculated cell growth that resulted in removal efficiencies of 99.5% for H2S and 99.2% for NH3. Microbial community observation by scanning electron microscopy indicated that granule activated carbon was an excellent support for microorganism attachment for long-term waste gas treatment. No disintegration or breakdown of biofilm was found when the system was operated for 140 days. The low bioaerosol concentration emitted from the biofilter showed that the system effectively avoided the environmental risk of bioaerosol emission. Also, the system is suitable to apply in the field because of its low pressure drop and treatment cost. Because NH3 gas was mainly converted to organic nitrogen, and H2S gas was converted to elemental sulfur, no acidification or alkalinity phenomena were found because of the metabolite products. Thus, the results of this study demonstrate that the biofilter is a feasible bioreactor in the removal of waste gases.     

Study On the Hydraulic Characteristics of Taichung Harbour in Taiwan

For this study, field measurements of current profiles, buoy trajectories and the lag of two tidal stations were performed to explore the flow characteristics of Taichung Harbour. in order to distinguish the effects of wind drift current on circulation inside Taichung Harbour, field surveys during both summer and monsoon (winter) season were completed separately. the speed of the drift current was about 3.5% that of the, wind speed, based on the field data. the horizontal dispersion coefficients were close to Bowden's (1965) formula for the tidal current. the water temperature showed a two-layer profile, with the mixing thickness about 4 to 6 metres for the upper layer. the corresponding Richardson number was about 70. the tidal lag between the two tidal stations was 9.68 minutes. All the results agree well with the theoretical results.     

Fuzzy AHP-based study of cleaner production implementation in Taiwan PWB manufacturer

In recent years, many electronic manufacturing firms have looked upon Cleaner Production (CP) as the means by which they could maintain environmental practice and competitive advantages. CP has been adopted by companies as an important factor in enhancing industrial productivity. Sustainable projects that deal appropriately with environmental and social factors are also more likely to be the most profitable.This paper investigated the criteria and attributes that determine a successful adoption and implementation of CP in reference to PWB manufacture in Taiwan. Fuzzy Analytic Hierarchy Process (FAHP) methodology is used to discuss the different decision criteria that include Organizing, Systems and Technologies, Measurement and Feedback, Working environment and Worker's Culture which are all vital factors in an effective CP implementation. AHP is an efficient tool in controlling the fuzziness of the data involved in choosing the most preferred decision variables. The linguistic level of comparisons produced by the manufacturers and experts are tapped and constructed in a form of triangular fuzzy numbers in order to construct fuzzy pairwise comparison matrices. The implementation of the system is demonstrated by a problem involving three stages of hierarchy which contains different criteria and attributes at a wider perspective within an environmental uncertainty. The findings advocate that these enterprises would need to setup the priorities of the CP implementation. The results suggest a generic hierarchical model of organizations of which the highest level is to be prioritized among the CP implementation factors.     

Effects of acid treatments of activated carbon on its physiochemical structure as a support for copper oxide in DeSO(2) reaction catalysts

To enhance the dispersion of active sites, modification of the AC supports with different acid solution might result in various surface oxygen groups which act as anchoring sites for metallic precursor to stay and improve the reactivity between AC supports and copper precursor. In the present work, the AC support is tailored with HCl and HNO(3), respectively. The pore structure, surface oxygen groups of the AC support and catalysts as well as catalyst dispersion before and after acid treatments are systematically studied by BET, pH(slurry), TPD, and XRPD analyses. It is found that the order of activity in DeSO(2) reaction is as follows: Cu/AC-HCl>Cu/AC>Cu/AC-HNO(3). The same sequence is also observed for the pore structure of AC supports, the catalyst dispersion, but not for the amounts of CO(2) evolving during TPD experiments of supports. The key role of acid treatment on carbon surface chemistry and pore structure, which are closely related to catalyst dispersion and adsorption capacity, is examined to rationalize these findings. Furthermore, under the NO/NH(3)=1 the NO could be selective catalytic reduction with NH(3) in the presence of O(2), which catalyzed by fresh and spent AC-supported catalyst.     

Enhanced photocatalysis of pentachlorophenol by metal-modified titanium (IV) oxide

The effects of four metals (Ag, Au, Pt, and Cu) doped on TiO2 on the photocatalysis of pentachlorophenol (PCP) were investigated. The results of this study indicated that all four metals-doped TiO2 catalysts were able to enhance the efficiency of PCP photocatalysis with an optimum metallic content of 0.1 wt%. For the metal-doped TiO2 samples (Au, Pt, and Cu), the patterns of light absorption were significantly extended toward visible light spectra in the wavelengths between 400 and 800 nm. The photocatalysis of PCP was pH dependent with the maximum degradation rate achieved in the solution at pH 3. The formation of chloride ion corresponded with the concentration of PCP degraded which confirmed that dechlorination was the major pathway of PCP photocatalysis. The overall toxicities of PCP samples were reduced with the extension of light exposure using the microtox test. The results of PCP photocatalysis are also discussed based on the characteristics of metal/TiO2 including X-ray differential (XRD) patterns, Brunquer Emmett Teller (BET) specific area analysis, and Ultra Violet (UV)-Vis absorption spectra.     

Biotreatment of H2S- and NH3-containing waste gases by co-immobilized cells biofilter

Gas mixture of H2S and NH3 in this study has been the focus in the research area concerning gases generated from the animal husbandry and the anaerobic wastewater lagoons used for their treatment. A specific microflora (mixture of Thiobacillus thioparus CH11 for H2S and Nitrosomonas europaea for NH3) was immobilized with Ca-alginate and packed inside a glass column to decompose H2S and NH3. The biofilter packed with co-immobilized cells was continuously supplied with H2S and NH3 gas mixtures of various ratios, and the removal efficiency, removal kinetics, and pressure drop in the biofilter was monitored. The results showed that the efficiency remained above 95% regardless of the ratios of H2S and NH3 used. The NH3 concentration has little effect on H2S removal efficiency, however, both high NH3 and H2S concentrations significantly suppress the NH3 removal. Through product analysis, we found that controlling the inlet ratio of the H2S/NH3 could prevent the biofilter from acidification, and, therefore, enhance the operational stability. Conclusions from bioaerosol analysis and pressure drop in the biofilter suggest that the immobilized cell technique creates less environmental impact and improves pure culture operational stability. The criteria for the biofilter operation to meet the current H2S and NH3 emission standards were also established. To reach Taiwan's current ambient air standards of H2S and NH3 (0.1 and 1 ppm, respectively), the maximum inlet concentrations should not exceed 58 ppm for H2S and 164 ppm for NH3, and the residence time be kept at 72 s.     

The catalytic incineration of styrene over an Mn2O3/Fe2O3 catalyst

In this study, styrene monomer (SM) was treated by a commercial catalyst, Mn2O3/Fe2O3, in a fixed-bed reactor. The study can be classified into two major parts. First, the effects of operating factors, such as temperature, SM concentration, space velocity, and O2 concentration, on the performance of the catalyst were investigated. Second, two catalyst life tests were carried out to characterize the deactivation effect of SM. The results show that the catalyst results in higher conversion of SM at a higher inlet temperature and higher O2 concentrations. The conversion of SM decreases with increasing SM concentration and space velocity. From the statistical analysis of the data, we find that temperature is the most important factor on the catalytic incineration. Oxygen concentration, SM concentration, and space velocity are significant parameters as well. This paper also provides information on the deactivation effect of SM. The catalysts were characterized by surface and pore-size analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), and electron spectroscopy for chemical analysis (ESCA) before and after the tests. The results show that the catalytic deactivation may be caused by carbon coating, and the pore size and surface area of the catalyst are smaller after deactivation.