Effect of solar ultra-violet radiation on the kelp Ecklonia radiata

During spring and summer, 1982–1986, experiments were carried out near Marmion Reef, Western Australia. In summer, nearly 30% of the surface solar ultraviolet radiation (280 to 400 nm) penetrates offshore waters to 5 m depth. Experimental removal of the mature Ecklonia radiata kelp canopy in summer results in tissue damage, photopigment destruction, reduced growth, and low survivorship of subcanopy kelp sporophytes. These effects do not occur with canopy removal in winter. Laboratory experiments revealed that the UV component of radiation, rather than intense photosynthetically active radiation, was responsible for the inhibition of growth and photodamage. UV radiation probably affects survival of the settlement stages of E. radiata sporophytes, thus excluding them from otherwise suitable substrata in shallow waters. UV radiation is implicated in the reduction of canopy productivity in summer.     

Book reviews

Rebuilding the City: Property‐led Urban Regeneration

P. Healey, S. Davoudi, M. O'Toole, S. Tavsanoglu & D. Usher (Eds)

London, E. & F. N. Spon, 1992, 312 pp., £30

Der Wert stadtnaher Wälder als Erholungsraum: Eine ökonomishce Analyse am Beispiel von Lugano (Value of Urban Forests as Recreational Areas: An Economic Analysis on the Case of Lugano)

Claudia Nielsen

Chur (Switzerland), Verlag Rüegger, 1992, 261 pp., SFr 48

Urban Planning under Thatcherism: The Challenge of the Market

A. Thornley

London, Routledge, 1991, 253 pp., £14.99

Sustainable Development and Urban Form, European Research in Regional Science 2

M. J. Breheny (Ed)

London, Pion, Limited, 1992, 292 pp., £28.00.

Tourism, Museums and the Local Economy: The Economic Impact of the North of England Open Air Musuem at Beamish

Peter Johnson & Barry Thomas

Cheltenham, Edward Elgar, 1992, 160 pp., £29.50     

An Application of a Modified Ecological Footprint Method and Structural Path Analysis in a Comparative Institutional Study

This paper presents an application of a modified ecological footprint method, using a regional, disturbance-based approach. In contrast to conventional institutional ecological footprint calculations, energy and land use resulting from all upstream production processes are explored by employing an input-output framework. Ecological footprints are calculated for two research institutions: the School of Physics (SoP) at the University of Sydney, and the Sustainable Ecosystems (CSE) Department of the Commonwealth Scientific and Industrial Research Organisation. These are broken down further in terms of land disturbance and greenhouse gas emissions, and as a function of production layer. To enable the use of the results in policy formulation, the ecological footprints are decomposed into detailed contributing paths, which are ranked according to their importance, using structural path analysis. The paper demonstrates that a considerable proportion of impacts occur upstream in industrial production. Thus a significant result of the study is the weight of obscure paths in the total footprints and, therefore, the importance of conducting an holistic assessment in order to ensure all upstream contributions are captured in the final impact of the institution.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

Discretionary Judgement in Local Planning Authority Decision Making: Screening Development Proposals for Environmental Impact Assessment

Screening is a critical decision-stage in the Environmental Impact Assessment (EIA) process and involves the determination of whether or not a development proposal will require EIA. This decision requires a discretionary judgement on whether the development has the potential to cause ‘significant environmental effects’, and consequently there is potential for diversity to exist in formal requests for EIA. Drawing upon a comprehensive survey of Local Planning Authorities (LPAs) in England and Wales, this paper explores the characteristics of LPA screening decision making since the introduction of revised EIA regulations in March 1999. The paper starts with a theoretical overview of rationality, decision making and planning theory, followed by a brief review of the regulatory context of EIA screening. The research approach is then outlined and the survey findings are presented, including a detailed consideration of organizational and individual level analyses set within the context of planning theory judgement debates. Comparisons with other European countries are briefly made, before drawing conclusions and recommendations.     

Spatial variability of soil phosphorus in relation to the topographic index and critical source areas: sampling for assessing risk to water quality

A measure of soil P status in agricultural soils is generally required for assisting with prediction of potential P loss from agricultural catchments and assessing risk for water quality. The objectives of this paper are twofold: (i) investigating the soil P status, distribution, and variability, both spatially and with soil depth, of two different first-order catchments; and (ii) determining variation in soil P concentration in relation to catchment topography (quantified as the "topographic index") and critical source areas (CSAs). The soil P measurements showed large spatial variability, not only between fields and land uses, but also within individual fields and in part was thought to be strongly influenced by areas where cattle tended to congregate and areas where manure was most commonly spread. Topographic index alone was not related to the distribution of soil P, and does not seem to provide an adequate indicator for CSAs in the study catchments. However, CSAs may be used in conjunction with soil P data for help in determining a more "effective" catchment soil P status. The difficulties in defining CSAs a priori, particularly for modeling and prediction purposes, however, suggest that other more "integrated" measures of catchment soil P status, such as baseflow P concentrations or streambed sediment P concentrations, might be more useful. Since observed soil P distribution is variable and is also difficult to relate to nationally available soil P data, any assessment of soil P status for determining risk of P loss is uncertain and problematic, given other catchment physicochemical characteristics and the sampling strategy employed.     

Analysis of waste management issues arising from a field study evaluating decontamination of a biological agent from a building

The Bio-response Operational Testing and Evaluation (BOTE) Project was a cross-government effort designed to operationally test and evaluate a response to a biological incident (release of Bacillus anthracis [Ba] spores, the causative agent for anthrax) from initial public health and law enforcement response through environmental remediation. The BOTE Project was designed to address site remediation after the release of a Ba simulant, Bacillus atrophaeus spp. globigii (Bg), within a facility, drawing upon recent advances in the biological sampling and decontamination areas. A key component of response to a biological contamination incident is the proper management of wastes and residues, which is woven throughout all response activities. Waste is generated throughout the response and includes items like sampling media packaging materials, discarded personal protective equipment, items removed from the facility either prior to or following decontamination, aqueous waste streams, and materials generated through the application of decontamination technologies. The amount of residual contaminating agent will impact the available disposal pathways and waste management costs. Waste management is an integral part of the decontamination process and should be included through “Pre-Incident” response planning. Overall, the pH-adjusted bleach decontamination process generated the most waste from the decontamination efforts, and fumigation with chlorine dioxide generated the least waste. A majority of the solid waste generated during pH-adjusted bleach decontamination was the nonporous surfaces that were removed, bagged, decontaminated ex situ, and treated as waste. The waste during the two fumigation rounds of the BOTE Project was associated mainly with sampling activities. Waste management activities may represent a significant contribution to the overall cost of the response/recovery operation. This paper addresses the waste management activities for the BOTE field test.Implications: Management of waste is a critical element of activities dealing with remediation of buildings and outdoor areas following a biological contamination incident. Waste management must be integrated into the overall remediation process, along with sampling, decontamination, resource management, and other important response elements, rather than being a stand-alone activity. The results presented in this paper will provide decision makers and emergency planners at the federal/state/tribal/local level information that can be used to integrate waste management into an overall systems approach to planning and response activities.