Ozone in the urban southeastern United States

Ozone measurements (daily maximum values) from the Aerometric Information Retrieval System database are analyzed for selected sites, during 1980 to 1988, in southeastern USA. Frequency distributions, for most sites during most years, show a typical bell-shaped curve with the higher frequency around the yearly daily maximum ozone mean of about 100 to about 110 microg m(-3) (50-55 ppbv). Abnormal years in ozone concentration may skew the distribution as the mean shifts. A correlation of daily maximum ozone concentrations above 140 microg m(-3) (70 ppbv) between sites shows a division between the sites in the northern protion of the region and those in the southern portion of the region. Variations in ozone levels are well correlated over distances of several hundred kilometers, suggesting that high values are associated with synoptic scale episodes. An ozone exposure analysis also shows higher ozone exposures (250-300 ppm days) in the northerly sites as compared to the southerly sites (150-170 ppm days).     

Particulate,Carbon Monoxide,and Acid Emission Factors for Residential Wood Burning Stoves

Emissions from residential wood burning stoves are of Increasing concern in many areas. This concern is due to the magnitude of the emissions and the toxic and chemical characteristics of the pollutants. Recent testing of standard and new technology woodstoves has provided data for developing a family of particulate and carbon monoxide emission factor curves. This testing has also provided data illustrating the acidity of woodstove emissions. The particulate and carbon monoxide curves relate the actual stove emissions to the stove size and operating parameters of burn rate, fuel loading, and fuel moisture. Curves relating stove types to the acidity of emissions have also been constructed.

Test data show actual emissions vary from 3 to 50 grams per kilogram for particles and from 50 to 300 grams per kilogram for carbon monoxide. Since woodstove emissions are the largest single category of particulate emissions in many areas, it Is essential that these emissions be quantified specifically for geographic regions, allowing meaningful impact analysis modeling to be accomplished. Emission factors for particles and carbon monoxide are presented from several stove sizes and burn rates.

The acidic nature of woodstove emissions has been clearly demonstrated. Tests indicate woodstove flue gas condensate solutions to be predominantly in the 2.8 to 4.2 pH range. Condensate solutions from conventional woodstoves exhibited the characteristic buffering capacity of carboxylic acids when titrations were performed with a strong base. The environmental impact of buffered acidic woodstove emissions is not currently well understood; however, it is possible with the data presented here to make semi-quantitative estimates of acid emissions from particulate and carbon monoxide emission factors and wood use inventories.     

Critical technical elements of state bioassessment programs: a process to evaluate program rigor and comparability

We developed a systematic process to evaluate state/tribal bioassessment programs to provide information about the rigor of the technical approach. This is accomplished via on-site interviews to produce an evaluation that assigns one of four levels of rigor as an outcome. Level 4 is the most rigorous and reflects a technical capacity to accurately determine incremental condition and support management programs. The remaining three levels are less able to assess incremental condition and are appropriate for only some management support needs. Accurately determining impairment and diagnosing pollution-specific stressors are fundamental tasks that states/tribes must accomplish to provide management support. This goal is fulfilled to varying degrees by most states/tribes. The evaluation employs a checklist and a sliding scale of rigor for 13 technical elements. Feedback is provided to each state/tribe via a technical memorandum that describes the technical components of the monitoring program, highlights strengths, and recommends improvements for specific technical issues. This can be used to refine the bioassessment and monitoring programs to better support management programs. The results of 14 state/tribal evaluations are included here. The majority (nine states, one tribe) revealed that most operate at level 2 with developmental activities that will elevate the level of program rigor already underway. Two states operate level 4 programs and each have numeric biocriteria and refined designated uses in their water quality standards. This is the ultimate goal of the process of engaging states in the development of bioassessment programs in the U.S.     

AN EMPIRICALLY‐BASED SEQUENTIAL GROUND WATER MONITORING NETWORK DESIGN PROCEDURE1

ABSTRACT: A procedure using a simple, empirically‐based model that makes efficient use of available information has been developed for designing a ground water monitoring well network. A moving plume is described by siting wells in a sequential manner, relying upon two‐dimensional concentration data obtained from previously installed wells to determine the locations of future wells. Data sets from two well known, densely monitored natural gradient tracer studies were used to test the procedure. Plumes defined by all information in the original networks were compared to those defined by reduced networks designed by the new procedure. The new procedure tracked the plumes using only a portion of that information. The new procedure could have reduced the number of wells in the original tests by about 50 percent without appreciable loss of plume information as measured by plume location and extent and by tracer mass.     

Evaluation of a Soil‐Based System to Dissipate Multiple Pesticides

Pesticide contaminated wastewater resulting from leftover mixes, equipment cleaning, and container disposal are problems related to pesticide use. This study reports on the effectiveness of a soil‐based bioreactor (SBBR) to dissipate pesticides of differing concentrations and mixtures. In order to accomplish this study, soil columns were used to simulate the SBBR. A mixture of five herbicides and two insecticides from seven different chemical families (atrazine, dicamba, fluometuron, metolachlor, sulfentrazone, chlopyrifus, and λ‐cyhalothrin) were added to the SBBR‐simulated system as formulated products in three concentrations each: 0 part per million (control), 10 ppm, and 100 ppm. Additionally a 1,000 ppm treatment was added that included just the five herbicides to investigate how the system would respond to heavy loading. The system was run for 90 days with samples taken at day 4 (just prior to loading the columns), then at 30, 60, and 90 days. At low pesticide concentrations (10 and 100 ppm), there was significant dissipation (p < 0.05) of all pesticides in the columns except sulfentrazone. At 1,000 ppm, fluometuron, in addition to sulfentrazone, did not show significant dissipation. Overall, the system performed as expected and could be considered practical for use on farms or nurseries. ©2015 Wiley Periodicals, Inc.     

The Role of Biological Indicators in a State Water Quality Management Process

State water quality agencies are custodians of water quality management programs under the Clean Water Act of which the protection and restoration of biological integrity in surface waters is an integral goal. However, an inappropriate reliance on chemical/physical stressor and exposure data or administrative indicators in place of the direct measurement of ecological response has led to an incomplete foundation for water resource management. As point sources have declined in significance, the consequences of this flawed foundation for dealing with the major limitations to biological integrity (nonpoint sources, habitat degradation) have become more apparent. The use of biocriteria in Ohio, for example, resulted in the identification of 50% more impairment than a water chemistry approach alone and other inconsistencies of a flawed monitoring foundation are illustrated in the national 305(b) report statistics on waters monitored, aquatic life use attainment, and habitat degradation. Biological criteria (biocriteria) incorporates the broader concept of water resource integrity to supplement the roles of chemical and toxicological approaches and reduces the likelihood of making overly optimistic estimates of aquatic life condition. A carefully conceived ambient monitoring approach comprised of biological, chemical, and physical measures ensures all relevant stressors to water resource integrity are identified and that the efficacy of administrative actions can be directly measured with environmental results. New multimetric indices, such as the IBI, ICI, and BIBI represent a significant advancement in aquatic resource characterization that have allowed the inclusion of biological information into many States water quality management programs. Ohio adopted numerical biocriteria in the Ohio water quality standards regulations in May 1990 and, through multiple aquatic life uses that reflect a continuum of biological condition, represents a tiered approach to water resource management. Biocriteria provide the impetus and opportunity to recognize and account for natural, ecological variability in the environment, something which previously was been lacking in state water quality management programs. The upper Great Miami River in Ohio illustrates a case study where bioassessment data documented the efficacy of efforts to permit, fund, and construct municipal treatment systems in restoring aquatic life. In contrast, in the Mahoning River similar administrative actions were inadequate to restore aquatic life in an environment with severe sediment contamination and impacts from combined sewer overflows. A biocriteria-based goal of restoring 75% of aquatic life uses by the year 2000 in Ohio has led to the use of biological data to identify trends and forecast the status and the causes and sources of impairment to Ohio streams, an effort that should affect the strategic focus of our water resource management efforts. A biocriteria-based approach has profoundly influenced strategic planning and priority setting, water quality based permitting, water quality standards, basic monitoring and reporting, nonpoint source assessment, and problem discovery within Ohio EPA.     

Benefit‐Cost Analysis of Integrated Water Resource Management: Accounting for Interdependence in the Yakima Basin Integrated Plan

Integrated water resource management (IWRM) requires accounting for many interrelated facets of water systems, water uses and stakeholders, and water management activities. The consequence is that project analysis must account for the nonseparability among the component parts of IWRM plans. This article presents a benefit‐cost (B‐C) analysis of a set of projects included in the Yakima Basin Integrated Plan proposed for the Yakima Basin in south‐central Washington State. The analysis accounts for interdependence among proposed water storage projects and between water storage and water market development in the context of historical and more adverse projected future climate scenarios. Focusing on irrigation benefits from storage, we show that the value of a given proposed storage project is lower when other proposed storage projects in the basin are implemented, and when water markets are functioning effectively. We find that none of the water storage projects satisfy a B‐C criterion, and that assuring proposed instream flow augmentation is less expensive by purchasing senior diversion rights than relying on new storage to provide it.