Nutrient baselines of Cerrado low-order streams: comparing natural and impacted sites in Central Brazil

The aquatic systems responsible for water supply in the Brazilian Federal District (FD) have been threatened by anthropogenic pressures, especially considering the expressive demographic increase in the region during the last decades. The purposes of this research were: (a) to assess the water quality in streams located in the FD by monitoring physical–chemical variables; (b) to define baselines for these variables among different ecological status categories. The 14 investigated streams were sampled between 2006 and 2009, in the dry (August–September, 2006, 2008, 2009) and rainy (March–April, 2008, 2009) seasons. All sampling sites were classified in four categories (“very impacted”, “impacted”, “in transition” and “natural”) using an adaptation of a rapid habitat assessment protocol. Differences in water quality among sites were generally well predicted in the four ecological status categories defined by the protocol, which showed a gradient in nutrient concentrations from reference sites classified as “natural” (medians: electrical conductivity?=?7.3 μS cm^?1; nitrate?=?0.040 mg L^?1; ammonium?=?0.039 mg L^?1; soluble reactive phosphorus (SRP)?=?<0.001 mg L^?1; total phosphorus (TP)?=?0.006 mg L^?1; ) to those classified as “very impacted” (medians: electrical conductivity?=?87.7 μS cm^?1; nitrate?=?0.247 mg L^?1; ammonium?=?0.219 mg L^?1; SRP?=?0.010 mg L^?1; TP?=?0.035 mg L^?1). Point sources inputs were the main factor for water quality deterioration. The nutrient baselines reported were relatively low when compared to data collected from reference areas in Brazil (e.g., São Paulo State) or temperate regions, especially for TP.     

Fungal spores from Pleosporales in the atmosphere of urban and rural locations in Portugal

Fungal spores are a significant fraction of the atmospheric bioparticles (bioaerosols) and many species are capable of inducing the production of specific immunoglobulin E (IgE), aggravating the clinical symptoms of allergic respiratory diseases in sensitized individuals. The aim of this work was to evaluate the distribution of potentially allergenic Pleosporales spores in two locations with different urbanization indexes, characterizing its seasonal pattern. The seasonal distribution of several spore types belonging to the Pleosporales (Alternaria, Drechslera, Epicoccum, Paraphaeosphaeria, Pithomyces, Pleospora and Stemphylium) in Amares (rural area) and Porto (urban area) was continually studied from January 2005 to December of 2007, using Hirst-type volumetric spore traps. Alternaria was the most abundant fungal spore type found in the atmosphere of Amares and Porto. This fungal type, together with Drechslera, Epicoccum, Pithomyces and Stemphylium, was mainly present during summer. Nevertheless, Leptosphaeria, Pleospora and Venturia spores were detected during winter and spring, while Paraphaeosphaeria spores were also observed during summer and autumn. These different seasonal patterns were responsible for the expansion of the exposure period for the Alt a 1 allergen. The concentration of the studied spore types was higher in the rural area than in the urban one, with exception for Pleospora and Drechslera. According to the correlations with meteorological factors, the selected fungal spores can be divided into two groups: (i) Alternaria, Drechslera, Epicoccum, Pithomyces and Stemphylium presented positive correlations with temperature and negative correlations with relative humidity and rainfall; (ii) Leptosphaeria, Paraphaeosphaeria, Pleospora and Venturia presented a contrary behavior. Usually, the occurrence of the Alt a 1 allergen has been associated with the presence of airborne Alternaria spores; the present work follows the seasonal distribution of other fungal spore species known to contain this molecule. The widespread occurrence of Alt a 1 plays an important role in the incidence and aggravation of allergic disorders.     

Validation and global uncertainty of a gas chromatographic with mass spectrometry method for fenamidone analysis in grapes and wines

Fenamidone is an imidazolinone fungicide recently introduced in viticulture practices. This work reports the validation and assessment of global uncertainty of a gas chromatographic with mass spectrometry method to analyze fenamidone in grapes and wines. This method consists in a simple and fast liquid-liquid extraction step followed by chromatographic determination. Limits of detection for fenamidone in grapes and wines were, respectively, 0.05 mg/kg and 0.06 mg/L, precision was below 9.4% and average recovery was 89 +/- 5%. In the concentration range from 0.05 to 1.00 mg/kg (or mg/L) of fenamidone, global uncertainty calculated following the EURACHEM/CITAC rules, and also by the Horwitz function, was below 25%. The EURACHEM/CITAC global uncertainty budget used gave lower estimates than those obtained from the Horwitz function.     

Curcumin and Its Analogs as a Therapeutic Strategy in Infections Caused by RNA Genome Viruses

Food and Environmental Virology - The use of natural resources for the prevention and treatment of diseases considered fatal to humanity has evolved. Several medicinal plants have nutritional and...     

Perceived importance of sustainability dimensions in the Portuguese metal industry

The growing interest of stakeholders regarding the contribution of organizations to Sustainable Development is influencing organizational behavior and strategic planning. The purpose of the present paper is to analyze the perception of the importance of organizational sustainability dimensions in a relevant economic sector: the metal industry. Survey data was collected from a sample of 211 Portuguese industries, and non-parametric statistical tests were used to validate five research hypotheses regarding the importance of the economic, environmental, social and cultural dimensions of sustainability. The results obtained demonstrate awareness of the sampled industries regarding all sustainability dimensions, recognizing that their importance has been increasing over the years, and prospecting that this importance will continue to increase in the future. The industries in this sample revealed different degrees of perceived importance for the different sustainability dimensions: the highest importance was given to the economic dimension, and culture was considered the least important sustainability dimension. However, the perception of the respondents is that these differences will be less relevant in the future. The results also show that companies with certified management systems reveal a higher perceived importance regarding sustainability dimensions. Also, industries with higher values of annual turnover, number of employees and export sales tend to give higher degrees of importance to sustainability dimensions. Considering the economic, environmental and social impacts of metal industries at an international level, the awareness of this industrial sector regarding the importance of sustainability is a relevant step to the commitment towards Sustainable Development.     

Identification, analysis and dissemination of information on near misses: A case study in the construction industry

Near misses are well-known for providing a major source of useful information for safety management. They are more frequent events than accidents and their causes may potentially result in an accident under slightly different circumstances. Despite the importance of this type of feedback, there is little knowledge on the characteristics of near misses, and on the use of this information in safety management. This article proposes guidelines for identifying, analyzing and disseminating information on near misses in construction sites. In particular, it is proposed that near misses be analyzed based on four categories: (a) whether or not it was possible to track down the event; (b) the nature of each event, in terms of its physical features (e.g. falling objects); (c) whether they provided positive or negative feedback for the safety management system; and (d) risk, based on the probability and severity associated with each event. The guidelines were devised and tested while a safety management system was being developed in a healthcare building project. The monitoring of near misses was part of a safety performance measurement system. Among the main results, a dramatic increase in both the number and quality of reports stands out after the workforce was systematically encouraged to report. While in the first 4 months of the study – when the workforce was not encouraged to report – there were just 12 reports, during the subsequent 4 months – when the workforce was so encouraged – there were 110 reports, all of them being analyzed based on the four analytical categories proposed.     

A method for assessing health and safety management systems from the resilience engineering perspective

This article introduces a method for assessing health and safety management systems (MAHS) that has two innovative characteristics: (a) it brings together the three main auditing approaches to health and safety (HS) – the structural approach (which assesses the system prescribed), the operational approach (which assesses what is really happening on the shop-floor) and the performance approach (which assesses the results of performance indicators); (b) it emphasizes the resilience engineering perspective on HS, which takes into consideration four major principles (flexibility, learning, awareness, and top management commitment). Such principles underlie seven major assessment criteria, which in turn are divided into items (e.g. hazard identification from a resilience perspective is an item that belongs to the criteria of production processes). The items are sub-divided into statements, which are the requirements that should be assessed based on interviews, analysis of documents and direct observations. Within the 112 requirements proposed, 38 of them have clear links with at least one out of the four resilience engineering principles adopted. The remaining requirements are based on traditional assumptions underlying the so-called best practices of HS management. The results of the assessment for each item are expressed by a score on a scale of compliance with the established requirements, ranging from 0% to 100%. The specific score within that scale is obtained from tables used to assess applications for the Brazilian national quality award. The MAHS was tested in a case study that was carried out in a factory that manufactures automobile exhaust systems, located in Brazil.     

Cadmium background concentrations to establish reference quality values for soils of São Paulo State,Brazil

Proper assessment of soil cadmium (Cd) concentrations is essential to establish legislative limits. The present study aimed to assess background Cd concentrations in soils from the state of São Paulo, Brazil, and to correlate such concentrations with several soil attributes. The topsoil samples (n?=?191) were assessed for total Cd contents and for other metals using the USEPA 3051A method. The background concentration was determined according to the third quartile (75th). Principal component analysis, Spearman correlation, and multiple regressions between Cd contents and other soil attributes (pH, cation exchange capacity (CEC), clay content, sum of bases, organic matter, and total Fe, Al, Zn, and Pb levels) were performed. The mean Cd concentration of all 191 samples was 0.4 mg kg^?1, and the background concentration was 0.5 mg kg^?1. After the samples were grouped by parent material (rock origin) and soil type, the background Cd content varied, i.e., soils from igneous, metamorphic, and sedimentary rocks harbored 1.5, 0.4, and 0.2 mg kg^?1 of Cd, respectively. The background Cd content in Oxisols (0.8 mg kg^?1) was higher than in Ultisols (0.3 mg kg^?1). Multiple regression demonstrated that Fe was primarily attributed to the natural Cd contents in the soils (R ²?=?0.79). Instead of a single Cd background concentration value representing all São Paulo soils, we propose that the concentrations should be specific for at least Oxisols and Ultisols, which are the primary soil types.